74ABTH16374BDG-T [NXP]
IC ABT SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48, Bus Driver/Transceiver;型号: | 74ABTH16374BDG-T |
厂家: | NXP |
描述: | IC ABT SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48, Bus Driver/Transceiver 触发器 |
文件: | 总10页 (文件大小:90K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
74ABT16374B
74ABTH16374B
16-bit D-type flip-flop;
positive-edge trigger (3-State)
Product specification
1998 Feb 27
Supersedes data of 1995 Sep 28
IC23 Data Handbook
Philips
Semiconductors
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
FEATURES
DESCRIPTION
The 74ABT16374B high-performance BiCMOS device combines
low static and dynamic power dissipation with high speed and high
output drive.
• Two 8-bit positive edge triggered registers
• Live insertion/extraction permitted
• Power-up 3-State
The 74ABT16374B has two 8-bit, edge triggered registers, with each
register coupled to eight 3-State output buffers. The two sections of
each register are controlled independently by the clock (nCP) and
Output Enable (nOE) control gates.
• Power-up reset
• Multiple V and GND pins minimize switching noise
CC
Each register is fully edge triggered. The state of each D input, one
set-up time before the Low-to-High clock transition, is transferred to
the corresponding flip-flop’s Q output.
• 3-State output buffers
• 74ABTH16373B incorporates bus-hold data inputs which
eliminate the need for external pull-up resistors to hold unused
inputs
The 3-State output buffers are designed to drive heavily loaded
3-State buses, MOS memories, or MOS microprocessors. Each
active-Low Output Enable (nOE) controls all eight 3-State buffers for
its register independent of the clock operation.
• Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
When nOE is Low, the stored data appears at the outputs for that
register. When nOE is High, the outputs for that register are in the
High-impedance “OFF” state, which means they will neither drive
nor load the bus.
• Output capability: +64mA/–32mA
• Latch-up protection exceeds 500mA per JEDEC Std 17
• ESD protection exceeds 2000V per MIL STD 883 Method 3015
Two options are available, 74ABT16374B which does not have the
bus-hold feature and 74ABTH16374B which incorporates the
bus-hold feature.
and 200V per Machine Model
QUICK REFERENCE DATA
CONDITIONS
= 25°C; GND = 0V
SYMBOL
PARAMETER
TYPICAL
UNIT
T
amb
t
t
Propagation delay
nCP to nQx
2.6
2.2
PLH
PHL
C = 50pF; V = 5V
ns
L
CC
C
Input capacitance
Output capacitance
V = 0V or V
CC
4
7
pF
pF
IN
I
C
V = 0V or V ; 3-State
O CC
OUT
CCZ
I
Outputs disabled; V = 5.5V
500
8
µA
mA
CC
Quiescent supply current
I
Outputs Low; V = 5.5V
CCL
CC
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE OUTSIDE NORTH AMERICA
NORTH AMERICA
BT16374B DL
DWG NUMBER
SOT370-1
48-Pin Plastic SSOP Type III
48-Pin Plastic TSSOP Type II
48-Pin Plastic SSOP Type III
48-Pin Plastic TSSOP Type II
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
74ABT16374B DL
74ABT16374B DGG
74ABTH16374B DL
74ABTH16374B DGG
BT16374B DGG
BH16374B DL
SOT362-1
SOT370-1
BH16374B DGG
SOT362-1
PIN DESCRIPTION
LOGIC SYMBOL
PIN NUMBER
SYMBOL
FUNCTION
47 46 44 43 41 40 38 37
47, 46, 44, 43, 41, 40, 38, 37 1D0 – 1D7
36, 35, 33, 32, 30, 29, 27, 26 2D0 – 2D7
Data inputs
1D0 1D1 1D2 1D3 1D4 1D5 1D6 1D7
1CP
2, 3, 5, 6, 8, 9, 11, 12
1Q0 – 1Q7
48
1
Data outputs
13, 14, 16, 17, 19, 20, 22, 23 2Q0 – 2Q7
1OE
Output enable
inputs (active-Low)
1Q0 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7
1, 24
1OE, 2OE
Clock pulse inputs
(active rising edge)
2
3
5
6
8
9
11 12
48, 25
1CP, 2CP
GND
36 35 33 32 30 29 27 26
4, 10, 15, 21, 28, 34, 39, 45
7, 18, 31, 42
Ground (0V)
Positive supply
voltage
2D0 2D21 2D2 2D3 2D4 2D5 2D6 2D7
V
CC
25
24
2CP
2OE
2Q0 2Q1 2Q2 2Q3 2Q4 2Q5 2Q6 2Q7
13 14 16 17 19 20 22 23
SH00078
2
1998 Feb 27
853-1752 19027
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
LOGIC SYMBOL (IEEE/IEC)
PIN CONFIGURATION
1
2
48
47
1OE
1Q0
1Q1
GND
1Q2
1Q3
1CP
1D0
1
1OE
1CP
2OE
2CP
1EN
C1
2EN
C2
48
24
25
3
46 1D1
GND
1D2
4
45
44
5
47
46
44
43
2
3
6
43 1D3
1D
1
1D0
1D1
1D2
1D3
1D4
1D5
1D6
1D7
2D0
1Q0
1Q1
1Q2
1Q3
1Q4
1Q5
1Q6
1Q7
2Q0
7
42
V
V
CC
CC
5
8
41
40
39
38
37
36
35
34
33
32
31
30
1Q4
1Q5
1D4
1D5
6
9
41
40
8
GND
GND
10
11
12
13
14
15
16
17
18
19
9
1Q6
1Q7
2Q0
2Q1
GND
1D6
1D7
2D0
2D1
GND
38
37
11
12
13
36
2
2D
35
33
14
16
2D1
2D2
2D3
2D4
2D5
2D6
2D7
2Q1
2Q2
2Q3
2Q4
2Q5
2Q6
2Q7
2Q2
2Q3
2D2
2D3
32
30
29
17
19
20
V
V
CC
CC
2Q4
2D4
27
26
22
23
2Q5 20
29 2D5
21
22
23
24
28
27
26
25
GND
2Q6
GND
2D6
SH00077
2Q7
2OE
2D7
2CP
SA00326
LOGIC DIAGRAM
nD0
nD1
nD2
nD3
nD4
nD5
nD6
nD7
D
D
D
D
D
D
D
D
CP
Q
CP
Q
CP
Q
CP
Q
CP
Q
CP
Q
CP
Q
CP Q
nCP
nOE
nQ0
nQ1
nQ2
nQ3
nQ4
nQ5
nQ6
nQ7
SA00327
3
1998 Feb 27
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
FUNCTION TABLE
INPUTS
nCP
OUTPUTS
INTERNAL
REGISTER
OPERATING MODE
nOE
nDx
nQ0 – nQ7
L
L
↑
↑
l
h
L
H
L
H
Load and read register
L
↑
X
NC
NC
Hold
H
H
↑
↑
X
nDx
NC
nDx
Z
Z
Disable outputs
H
h
L
l
=
=
=
=
High voltage level
High voltage level one set-up time prior to the High-to-Low E transition
Low voltage level
Low voltage level one set-up time prior to the High-to-Low E transition
NC= No change
X
Z
↑
=
=
=
=
Don’t care
High impedance “off” state
Low-to-High clock transition
Not a Low-to-High clock transition
↑
1, 2
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
DC supply voltage
CONDITIONS
RATING
–0.5 to +7.0
–18
UNIT
V
V
CC
I
IK
DC input diode current
V < 0
I
mA
V
3
V
I
DC input voltage
–1.2 to +7.0
–50
I
DC output diode current
V
O
< 0
mA
V
OK
3
V
OUT
DC output voltage
output in Off or High state
output in Low state
–0.5 to +5.5
128
I
DC output current
mA
OUT
output in High state
–64
T
stg
Storage temperature range
–65 to 150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
PARAMETER
UNIT
MIN
4.5
0
MAX
V
CC
DC supply voltage
5.5
V
V
V
I
Input voltage
V
CC
V
High-level input voltage
Low-level Input voltage
High-level output current
Low-level output current
Input transition rise or fall rate
Operating free-air temperature range
2.0
V
IH
V
0.8
–32
64
V
IL
I
mA
mA
ns/V
°C
OH
I
OL
∆t/∆v
0
10
T
amb
–40
+85
4
1998 Feb 27
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
DC ELECTRICAL CHARACTERISTICS
LIMITS
= +25°C
T
= –40°C
to +85°C
amb
SYMBOL
PARAMETER
TEST CONDITIONS
T
amb
UNIT
MIN
TYP
MAX
MIN
MAX
V
Input clamp voltage
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 4.5V; I = –18mA
–0.9
2.9
–1.2
–1.2
V
V
IK
IK
= 4.5V; I = –3mA; V = V or V
2.5
3.0
2.0
2.5
3.0
2.0
OH
I
IL
IH
IH
V
OH
High-level output voltage
= 5.0V; I = –3mA; V = V or V
3.4
OH
I
IL
= 4.5V; I = –32mA; V = V or V
IH
2.4
OH
I
IL
V
OL
Low-level output voltage
= 4.5V; I = 64mA; V = V or V
IH
0.42
0.13
0.55
0.55
0.55
0.55
V
V
OL
I
IL
3
V
RST
Power-up output voltage
= 5.5V; I = 1mA; V = GND or V
O I CC
Input leakage current
74ABT16374B
I
V
V
= 5.5V; V = V or GND
0.01
±1
±1
±1
±1
µA
I
I
CC
I
CC
= 5.5V; V = V or
CC
I
CC
Control pins
±0.01
GND
Input leakage current
74ABTH16374B
I
µA
V
CC
V
CC
V
CC
= 5.5V; V = V
0.01
–1
1
1
I
CC
5
Data pins
= 5.5V; V = 0
–3
–5
I
= 4.5V; V = 0.8V
50
50
I
6
Bus Hold current inputs
74ABTH16374B
I
µA
V
V
V
= 4.5V; V = 2.0V
–75
–75
HOLD
CC
I
= 5.5V; V = 0 to 5.5V
±800
CC
I
I
Power-off leakage current
Power-up/down 3-State
= 0.0V; V or V ≤ 4.5V
±5.0
±5.0
±100
±50
±100
±50
µA
µA
OFF
CC
O
I
V
CC
= 2.1V; V = 0.5V;
O
I
PU/PD
4
output current
V = GND or V ; V
I
= GND
CC
OE
I
3-State output High current
3-State output Low current
Output High leakage current
V
V
V
V
V
V
V
= 5.5V; V = 2.7V; V = V or V
0.5
–0.5
5.0
–70
0.5
8
10
–10
50
10
–10
50
µA
µA
OZH
CC
CC
CC
CC
CC
CC
CC
O
I
IL
IH
IH
I
= 5.5V; V = 0.5V; V = V or V
O I IL
OZL
I
= 5.5V; V = 5.5V; V = GND or V
CC
µA
CEX
O
I
1
I
O
Output current
= 5.5V; V = 2.5V
–50
–180
2
–50
–180
2
mA
mA
mA
O
I
I
= 5.5V; Outputs High, V = GND or V
I
CCH
CC
I
Quiescent supply current
= 5.5V; Outputs Low, V = GND or V
19
19
CCL
I
CC
= 5.5V; Outputs 3-State;
0.5
5
2
2
mA
CCZ
V = GND or V
I
CC
Additional supply current
V
CC
V
CC
= 5.5V; one input at 3.4V, other inputs at
or GND
2
per input pin
∆I
∆I
100
100
µA
CC
74ABT16374B
Additional supply current
V
CC
V
CC
= 5.5V; one input at 3.4V, other inputs at
or GND
2
per input pin
0.5
1.5
1.5
mA
CC
74ABTH16374B
NOTES:
1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
2. This is the increase in supply current for each input at 3.4V.
3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power.
4. This parameter is valid for any V between 0V and 2.1V with a transition time of up to 10msec. From V = 2.1V to V = 5V ± 10% a
CC
CC
CC
transition time of up to 100µsec is permitted.
5. Unused pins at V or GND.
CC
6. This is the bus hold overdrive current required to force the input to the opposite logic state.
5
1998 Feb 27
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
AC CHARACTERISTICS
GND = 0V, t = t = 2.5ns, C = 50pF, R = 500Ω
R
F
L
L
LIMITS
T
V
= +25°C
= +5.0V
T
V
= –40 to +85°C
UNIT
amb
CC
amb
CC
SYMBOL
PARAMETER
WAVEFORM
= +5.0V ±0.5V
MIN
TYP
MAX
MIN
MAX
f
Maximum clock frequency
1
1
180
260
MHz
MAX
t
t
Propagation delay
nCP to nQx
1.7
1.4
2.6
2.2
4.0
3.4
1.7
1.4
4.7
ns
PLH
PHL
3.9
t
t
Output enable time
to High and Low level
3
4
1.3
1.3
2.4
2.3
3.7
3.4
1.3
1.3
4.7
ns
PZH
PZL
4.6
t
t
Output disable time
from High and Low level
3
4
1.9
1.7
3.1
2.6
4.6
4.0
1.9
1.7
5.5
ns
PHZ
PLZ
4.4
AC SETUP REQUIREMENTS
GND = 0V, t = t = 2.5ns, C = 50pF, R = 500Ω
R
F
L
L
LIMITS
T
V
= +25°C
= +5.0V
T
V
= –40 to +85°C
UNIT
amb
CC
amb
CC
SYMBOL
PARAMETER
WAVEFORM
= +5.0V ±0.5V
MIN
TYP
MIN
t (H)
t (L)
s
Setup time, High or Low
nDx to nCP
1.0
1.0
0.3
0.1
1.0
1.0
s
2
2
1
ns
ns
ns
t (H)
Hold time, High or Low
nDx to nCP
1.0
1.0
–0.1
–0.3
1.0
1.0
h
t (L)
h
t (H)
nCP pulse width
High or Low
2.8
2.8
1.2
1.5
2.8
2.8
w
t (L)
w
AC WAVEFORMS
V
M
= 1.5V, V = GND to 3.0V
IN
1/f
MAX
nDx
V
V
V
V
M
M
M
M
nCP
nQx
VM
t
VM
VM
t (H)
t
(H)
t (L)
t (L)
h
s
h
s
t
(H)
t (L)
w
w
nCP
t
PHL
PLH
V
V
M
M
VM
VM
NOTE: The shaded areas indicate when the input is permitted to
change for predictable output performance.
SA00329
SA00328
Waveform 2. Data Setup and Hold Times
Waveform 1. Propagation Delay, Clock Input to Output, Clock
Pulse Width, and Maximum Clock Frequency
6
1998 Feb 27
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
OE
V
V
M
M
V
V
M
OE
M
t
t
t
PLZ
PZL
t
PZH
PHZ
V
V
OH
OH
–0.3V
0V
nQx
V
M
V
nQx
M
V
V
+ 0.3V
OL
OL
SH00079
SH00080
Waveform 3. 3-State Output Enable Time to High Level and
Output Disable Time from High Level
Waveform 4. 3-State Output Enable Time to Low Level and
Output Disable Time from Low Level
TEST CIRCUIT AND WAVEFORM
t
W
V
AMP (V)
CC
90%
90%
7.0V
NEGATIVE
PULSE
V
V
M
M
10%
10%
90%
R
L
0V
(t
V
V
OUT
IN
PULSE
GENERATOR
D.U.T.
t
t
(t
(t
)
t
TLH
)
THL
F
R
)
t
(t )
R
R
L
C
TLH
R
THL F
T
L
AMP (V)
90%
M
POSITIVE
PULSE
V
V
M
Test Circuit for 3-State Outputs
10%
10%
t
W
0V
SWITCH POSITION
V
= 1.5V
M
TEST
SWITCH
Input Pulse Definition
t
closed
PLZ
PZL
t
closed
open
All other
INPUT PULSE REQUIREMENTS
DEFINITIONS
R = Load resistor; see AC CHARACTERISTICS for value.
L
FAMILY
Amplitude
3.0V
Rep. Rate
1MHz
t
t
t
F
W
R
C = Load capacitance includes jig and probe capacitance;
L
see AC CHARACTERISTICS for value.
74ABT/H16
500ns 2.5ns 2.5ns
R = Termination resistance should be equal to Z
T
of
OUT
pulse generators.
SA00018
7
1998 Feb 27
Philips Semiconductors
Product specification
Dual octal D-type flip-flop;
positive-edge trigger (3-State)
74ABT16374B
74ABTH16374B
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm
SOT370-1
8
1998 Feb 27
Philips Semiconductors
Product specification
Dual octal D-type flip-flop;
positive-edge trigger (3-State)
74ABT16374B
74ABTH16374B
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm
SOT362-1
9
1998 Feb 27
Philips Semiconductors
Product specification
16-bit D-type flip-flop; positive-edge trigger
(3-State)
74ABT16374B
74ABTH16374B
Data sheet status
[1]
Data sheet
status
Product
status
Definition
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Date of release: 05-96
9397-750-03492
Document order number:
Philips
Semiconductors
相关型号:
74ABTH16374BDGG-T
IC ABT SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48, 6.10 MM, PLASTIC, SOT-362-1, TSSOP2-48, Bus Driver/Transceiver
NXP
74ABTH16374BDL-T
IC ABT SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48, 7.50 MM, PLASTIC, SOT-370-1, SSOP3-48, Bus Driver/Transceiver
NXP
74ABTH16500CDGG-T
IC ABT SERIES, 18-BIT REGISTERED TRANSCEIVER, TRUE OUTPUT, PDSO56, 6.10 MM, PLASTIC, SOT-364-1, TSSOP2-56, Bus Driver/Transceiver
NXP
©2020 ICPDF网 联系我们和版权申明