74HC283DB-T [NXP]
IC HC/UH SERIES, 4-BIT ADDER/SUBTRACTOR, TRUE OUTPUT, PDSO16, 5.30 MM, PLASTIC, MO-150, SOT-338-1, SSOP-16, Arithmetic Circuit;型号: | 74HC283DB-T |
厂家: | NXP |
描述: | IC HC/UH SERIES, 4-BIT ADDER/SUBTRACTOR, TRUE OUTPUT, PDSO16, 5.30 MM, PLASTIC, MO-150, SOT-338-1, SSOP-16, Arithmetic Circuit 光电二极管 输出元件 逻辑集成电路 |
文件: | 总20页 (文件大小:99K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
74HC283
4-bit binary full adder with fast carry
Rev. 03 — 11 November 2004
Product data sheet
1. General description
The 74HC283 is a high-speed Si-gate CMOS device and is pin compatible with low power
Schottky TTL (LSTTL). The 74HC283 is specified in compliance with JEDEC
standard no. 7A.
The 74HC283 adds two 4-bit binary words (An plus Bn) plus the incoming carry (CIN).
The binary sum appears on the sum outputs (S1 to S4) and the out-going carry (COUT)
according to the equation:
CIN + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) =
= S1 + 2S2 + 4S3 + 8S4 + 16COUT
Where (+) = plus.
Due to the symmetry of the binary add function, the 74HC283 can be used with either all
active HIGH operands (positive logic) or all active LOW operands (negative logic). In case
of all active LOW operands the results S1 to S4 and COUT should be interpreted also as
active LOW. With active HIGH inputs, CIN must be held LOW when no carry in is
intended. Interchanging inputs of equal weight does not affect the operation, thus CIN, A1,
B1 can be assigned arbitrarily to pins 5, 6, 7, etc.
See the 74HC583 for the BCD version.
2. Features
■ High-speed 4-bit binary addition
■ Cascadable in 4-bit increments
■ Fast internal look-ahead carry
■ Low-power dissipation
■ Complies with JEDEC standard no. 7A
■ ESD protection:
◆ HBM EIA/JESD22-A114-B exceeds 2000 V
◆ MM EIA/JESD22-A115-A exceeds 200 V.
■ Multiple package options
■ Specified from −40 °C to +80 °C and from −40 °C to +125 °C.
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
3. Quick reference data
Table 1:
Quick reference data
GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
tPHL, tPLH
propagation delay
CIN to S1
CL = 15 pF; VCC = 5 V
-
-
-
-
-
-
-
-
-
16
18
20
23
21
20
20
3.5
88
-
-
-
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
ns
pF
pF
CIN to S2
CIN to S3
CIN to S4
An or Bn to Sn
CIN to COUT
An or Bn to COUT
input capacitance
CI
[1]
CPD
power dissipation
capacitance
VI = GND to VCC
[1] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + ∑(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
∑(CL × VCC2 × fo) = sum of outputs.
4. Ordering information
Table 2:
Ordering information
Type number
Package
Temperature range
−40 °C to +125 °C
−40 °C to +125 °C
Name
DIP16
SO16
Description
Version
74HC283N
74HC283D
plastic dual in-line package; 16 leads (300 mil) SOT38-4
plastic small outline package; 16 leads;
body width 3.9 mm
SOT109-1
74HC283DB
74HC283PW
−40 °C to +125 °C
−40 °C to +125 °C
SSOP16
plastic shrink small outline package; 16 leads; SOT338-1
body width 5.3 mm
TSSOP16
plastic thin shrink small outline package;
16 leads; body width 4.4 mm
SOT403-1
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
2 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
5. Functional diagram
9
COUT
9
11 B4
COUT
11
B4
12 A4
15 B3
14 A3
12
A4
S4 10
S3 13
15
14
2
10
13
1
S4
S3
S2
S1
B3
A3
B2
A2
B1
A1
2
3
6
5
B2
A2
B1
A1
S2
S1
1
4
3
4
6
5
CIN
7
CIN
7
001aab895
001aab897
Fig 1. Functional diagram
Fig 2. Logic symbol
5
3
0
P
14
12
4
0
1
3
0
S
13
6
12
15
11
10
3
Q
3
7
9
CIN
COUT
001aab896
Fig 3. IEC logic symbol
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
3 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
CIN
A1
B1
A2
B2
A3
B3
A4
B4
COUT
S1
S2
S3
S4
001aab898
Fig 4. Logic diagram
6. Pinning information
6.1 Pinning
1
2
3
4
5
6
7
8
16
V
S2
B2
CC
15
14
13
12
11
10
9
B3
A3
S3
A4
B4
S4
A2
S1
283
A1
B1
CIN
GND
COUT
001aab894
Fig 5. Pin configuration
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
4 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
6.2 Pin description
Table 3:
Symbol
S2
Pin description
Pin
1
Description
sum output 2
B2
2
B operand input 2
A operand input 2
sum output 1
A2
3
S1
4
A1
5
A operand input 1
B operand input 1
carry input
B1
6
CIN
GND
COUT
S4
7
8
ground (0 V)
9
carry output
10
11
12
13
14
15
16
sum output 4
B4
B operand input 4
A operand input 4
sum output 3
A4
S3
B3
A operand input 3
B operand input 3
positive supply voltage
A3
VCC
7. Functional description
7.1 Function table
Table 4:
Pins
Function table[1]
Input
Output
CIN
L
A4
H
1
A3
L
A2
H
1
A1
L
B4
H
1
B3
L
B2
L
B1
H
1
COUT
S4
L
S3
L
S2
H
1
S1
H
1
Logic levels
H
1
0
Active HIGH[2]
Active LOW[3]
0
0
0
0
0
0
0
1
0
1
0
1
0
1
1
0
1
1
0
0
[1] H = HIGH voltage level;
L = LOW voltage level.
[2] Example for active HIGH: 10 + 9 (0 + 1010 + 1001) = 19 (10011).
[3] Example for active LOW: 5 + 6 (1 + 0101 + 0110) = 12 (01100).
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
5 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
8. Limiting values
Table 5:
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to
GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max Unit
VCC
IIK
supply voltage
−0.5 +7
V
input diode current
output diode current
VI < −0.5 V or VI > VCC + 0.5 V
-
-
±20
mA
mA
IOK
VO < −0.5 V or
VO > VCC + 0.5 V
±20
±25
±50
IO
output source or sink
current
VO = −0.5 V to VCC + 0.5 V
-
mA
ICC, IGND VCC or GND current
-
mA
Tstg
Ptot
storage temperature
power dissipation
DIP16 package
−65
+150 °C
[1]
[2]
-
-
750
500
mW
SO16, SSOP16 and
TSSOP16 packages
mW
[1] Above 70 °C: Ptot derates linearly with 12 mW/K.
[2] Above 70 °C: Ptot derates linearly with 8 mW/K.
9. Recommended operating conditions
Table 6:
Symbol
VCC
Recommended operating conditions
Parameter
Conditions
Min
Typ
Max
Unit
V
supply voltage
input voltage
output voltage
2.0
5.0
6.0
VI
0
-
VCC
VCC
1000
500
400
+125
V
VO
0
-
V
tr, tf
input rise and fall times VCC = 2.0 V
VCC = 4.5 V
-
-
ns
ns
ns
°C
-
6.0
VCC = 6.0 V
-
-
-
Tamb
ambient temperature
−40
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
6 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
10. Static characteristics
Table 7:
Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Tamb = 25 °C
VIH
Parameter
Conditions
Min
Typ
Max
Unit
HIGH-level input voltage
VCC = 2.0 V
1.5
1.2
2.4
3.2
0.8
2.1
2.8
-
V
V
V
V
V
V
VCC = 4.5 V
3.15
-
VCC = 6.0 V
4.2
-
VIL
LOW-level input voltage
HIGH-level output voltage
VCC = 2.0 V
-
-
-
0.5
1.35
1.8
VCC = 4.5 V
VCC = 6.0 V
VOH
VI = VIH or VIL
IO = −20 µA; VCC = 2.0 V
IO = −20 µA; VCC = 4.5 V
IO = −20 µA; VCC = 6.0 V
IO = −4 mA; VCC = 4.5 V
IO = −5.2 mA; VCC = 6.0 V
VI = VIH or VIL
1.9
2.0
-
-
-
-
-
V
V
V
V
V
4.4
4.5
5.9
6.0
3.98
5.48
4.32
5.81
VOL
LOW-level output voltage
IO = 20 µA; VCC = 2.0 V
IO = 20 µA; VCC = 4.5 V
IO = 20 µA; VCC = 6.0 V
IO = 4 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = VCC or GND; VCC = 6.0 V
VI = VCC or GND; IO = 0 A;
-
-
-
-
-
-
-
0
0.1
V
0
0.1
V
0
0.1
V
0.15
0.26
0.26
±0.1
8.0
V
0.16
V
ILI
input leakage current
-
-
µA
µA
ICC
quiescent supply current
VCC = 6.0 V
CI
input capacitance
-
3.5
-
pF
Tamb = −40 °C to +85 °C
VIH HIGH-level input voltage
VCC = 2.0 V
1.5
-
-
-
-
-
-
-
V
V
V
V
V
V
VCC = 4.5 V
3.15
-
VCC = 6.0 V
4.2
-
VIL
LOW-level input voltage
HIGH-level output voltage
VCC = 2.0 V
-
-
-
0.5
1.35
1.8
VCC = 4.5 V
VCC = 6.0 V
VOH
VI = VIH or VIL
IO = −20 µA; VCC = 2.0 V
IO = −20 µA; VCC = 4.5 V
IO = −20 µA; VCC = 6.0 V
IO = −4 mA; VCC = 4.5 V
IO = −5.2 mA; VCC = 6.0 V
1.9
-
-
-
-
-
-
-
-
-
-
V
V
V
V
V
4.4
5.9
3.84
5.34
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
7 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
Table 7:
Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VOL
LOW-level output voltage
VI = VIH or VIL
IO = 20 µA; VCC = 2.0 V
IO = 20 µA; VCC = 4.5 V
IO = 20 µA; VCC = 6.0 V
IO = 4 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = VCC or GND; VCC = 6.0 V
VI = VCC or GND; IO = 0 A;
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.1
V
0.1
V
0.1
V
0.33
0.33
±1.0
80
V
V
ILI
input leakage current
µA
µA
ICC
quiescent supply current
VCC = 6.0 V
Tamb = −40 °C to +125 °C
VIH HIGH-level input voltage
VCC = 2.0 V
1.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
V
V
V
V
V
V
VCC = 4.5 V
3.15
-
VCC = 6.0 V
4.2
-
VIL
LOW-level input voltage
HIGH-level output voltage
VCC = 2.0 V
-
-
-
0.5
1.35
1.8
VCC = 4.5 V
VCC = 6.0 V
VOH
VI = VIH or VIL
IO = −20 µA; VCC = 2.0 V
IO = −20 µA; VCC = 4.5 V
IO = −20 µA; VCC = 6.0 V
IO = −4 mA; VCC = 4.5 V
IO = −5.2 mA; VCC = 6.0 V
VI = VIH or VIL
1.9
4.4
5.9
3.7
5.2
-
-
-
-
-
V
V
V
V
V
VOL
LOW-level output voltage
IO = 20 µA; VCC = 2.0 V
IO = 20 µA; VCC = 4.5 V
IO = 20 µA; VCC = 6.0 V
IO = 4 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = VCC or GND; VCC = 6.0 V
VI = VCC or GND; IO = 0 A;
-
-
-
-
-
-
-
0.1
0.1
0.1
0.4
0.4
±1.0
160
V
V
V
V
V
ILI
input leakage current
µA
µA
ICC
quiescent supply current
VCC = 6.0 V
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
8 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
11. Dynamic characteristics
Table 8:
Dynamic characteristics
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; see Figure 7.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Tamb = 25 °C
tPHL, tPLH propagation delay CIN to S1
see Figure 6
VCC = 2.0 V
-
-
-
-
52
19
15
16
160
32
27
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
see Figure 6
propagation delay CIN to S2
propagation delay CIN to S3
propagation delay CIN to S4
propagation delay An or Bn to Sn
propagation delay CIN to COUT
VCC = 2.0 V
-
-
-
-
58
21
17
18
180
36
31
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
see Figure 6
VCC = 2.0 V
-
-
-
-
63
23
18
20
195
39
33
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
see Figure 6
VCC = 2.0 V
-
-
-
-
74
27
22
23
230
46
39
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
see Figure 6
VCC = 2.0 V
-
-
-
-
69
25
20
21
210
42
36
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
see Figure 6
VCC = 2.0 V
-
-
-
-
63
23
18
20
195
39
33
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
see Figure 6
propagation delay An or Bn to
COUT
VCC = 2.0 V
-
-
-
-
63
23
18
20
195
39
33
-
ns
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
VCC = 5.0 V; CL = 15 pF
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
9 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
Table 8:
Dynamic characteristics …continued
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; see Figure 7.
Symbol
Parameter
Conditions
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
VI = GND to VCC
Min
Typ
Max
Unit
tTHL, tTLH output transition time
-
-
-
-
19
7
75
15
13
-
ns
ns
ns
pF
6
[1]
CPD
power dissipation capacitance
88
Tamb = −40 °C to +85 °C
tPHL, tPLH propagation delay CIN to S1
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
-
-
-
-
-
-
200
40
ns
ns
ns
34
propagation delay CIN to S2
propagation delay CIN to S3
propagation delay CIN to S4
propagation delay An or Bn to Sn
propagation delay CIN to COUT
-
-
-
-
-
-
225
45
ns
ns
ns
38
-
-
-
-
-
-
245
49
ns
ns
ns
42
-
-
-
-
-
-
290
58
ns
ns
ns
49
-
-
-
-
-
-
265
53
ns
ns
ns
45
-
-
-
-
-
-
245
49
ns
ns
ns
42
propagation delay An or Bn to
COUT
-
-
-
-
-
-
245
49
ns
ns
ns
42
tTHL, tTLH output transition time
-
-
-
-
-
-
95
19
16
ns
ns
ns
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
10 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
Table 8:
Dynamic characteristics …continued
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; see Figure 7.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Tamb = −40 °C to +125 °C
tPHL, tPLH propagation delay CIN to S1
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
see Figure 6
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
-
-
-
-
-
-
240
48
ns
ns
ns
41
propagation delay CIN to S2
propagation delay CIN to S3
propagation delay CIN to S4
propagation delay An or Bn to Sn
propagation delay CIN to COUT
-
-
-
-
-
-
270
54
ns
ns
ns
46
-
-
-
-
-
-
295
59
ns
ns
ns
50
-
-
-
-
-
-
345
69
ns
ns
ns
59
-
-
-
-
-
-
315
63
ns
ns
ns
54
-
-
-
-
-
-
295
59
ns
ns
ns
50
propagation delay An or Bn to
COUT
-
-
-
-
-
-
295
59
ns
ns
ns
50
tTHL, tTLH output transition time
-
-
-
-
-
-
110
22
ns
ns
ns
19
[1] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + ∑(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
∑(CL × VCC2 × fo) sum of outputs.
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
11 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
12. Waveforms
CIN, An, Bn,
input
V
M
t
t
PLH
PHL
Sn, COUT,
output
V
M
t
t
THL
TLH
001aab899
VM = 0.5 × VI.
Fig 6. Waveforms showing the inputs (CIN, An and Bn) to the outputs (Sn and COUT)
propagation delays and the output transition times
V
CC
V
V
O
I
PULSE
GENERATOR
D.U.T.
C
L
R
T
mna101
Test data is given in Table 9.
Definitions for test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
Fig 7. Load circuitry for switching times
Table 9:
Supply
VCC
Test data
Input
VI
Load
CL
tr, tf
6 ns
6 ns
6 ns
6 ns
2.0 V
VCC
VCC
VCC
VCC
50 pF
50 pF
50 pF
15 pF
4.5 V
6.0 V
5.0 V
13. Application information
Figure 8 shows a 3-bit adder using the 74HC283. Trying the operand inputs of the fourth
adder (A4 and B4) LOW makes S4 dependent on, and equal to, the carry from the third
adder.
Figure 9, based on the same principle, shows a method of dividing the 74HC283 into a
2-bit and 1-bit adder. The third stage adder (A3, B3 and S3) is used simply as means of
transferring the carry into the fourth stage (via A3 and B3) and transferring the carry from
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
12 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
the second stage on S3. As long as A3 and B3 are the same, HIGH or LOW, they do not
influence S3. Similarly, when A3 and B3 are the same, the carry into the third stage does
not influence the carry out of the third stage.
L
C1
COUT
COUT
B10
A10
C10
B4
A4
B3
A3
B4
A4
B3
A3
B2
A2
B1
A1
C3
S10
C2
S2
S4
S3
S2
S1
S4
S3
S2
S1
B2
A2
B1
A1
B2
A2
B1
A1
S1
CIN
CIN
CIN
001aab900
001aab901
Fig 8. 3-bit adder
Fig 9. 2-bit and 1-bit adder
Figure 10 shows a method of implementing a 5-input encoder, where the inputs are
equally weighted. The outputs S1, S2 and S3 produce a binary number equal to the
number inputs (I1 to I5) that are HIGH.
Figure 11 shows a method of implementing a 5-input majority gate. When three or more
inputs (I1 to I5) are HIGH, the output M5 is HIGH.
COUT
COUT
I5
B4
A4
B3
A3
B2
A2
B1
A1
I5
I4
I3
B4
A4
B3
A3
B2
A2
B1
A1
I4
I3
S4
S4
S3
S2
M5
S3
S2
L
I2
I1
I2
I1
S1
S1
CIN
CIN
001aab902
001aab903
Fig 10. 5-input encoder
Fig 11. 5-input majority gate
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
13 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
14. Package outline
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
D
M
E
A
2
A
A
1
L
c
e
w M
Z
b
1
(e )
1
b
b
2
16
9
M
H
pin 1 index
E
1
8
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
(1)
A
A
A
2
(1)
(1)
Z
1
w
UNIT
mm
b
b
b
c
D
E
e
e
L
M
M
H
1
2
1
E
max.
min.
max.
max.
1.73
1.30
0.53
0.38
1.25
0.85
0.36
0.23
19.50
18.55
6.48
6.20
3.60
3.05
8.25
7.80
10.0
8.3
4.2
0.51
3.2
2.54
0.1
7.62
0.3
0.254
0.01
0.76
0.068 0.021 0.049 0.014
0.051 0.015 0.033 0.009
0.77
0.73
0.26
0.24
0.14
0.12
0.32
0.31
0.39
0.33
inches
0.17
0.02
0.13
0.03
Note
1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
95-01-14
03-02-13
SOT38-4
Fig 12. Package outline SOT38-4 (DIP16)
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
14 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
D
E
A
X
v
c
y
H
M
A
E
Z
16
9
Q
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
1
8
e
w
M
detail X
b
p
0
2.5
scale
5 mm
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
E
max.
0.25
0.10
1.45
1.25
0.49
0.36
0.25
0.19
10.0
9.8
4.0
3.8
6.2
5.8
1.0
0.4
0.7
0.6
0.7
0.3
mm
1.27
0.05
1.05
0.041
1.75
0.25
0.01
0.25
0.01
0.25
0.1
8o
0o
0.010 0.057
0.004 0.049
0.019 0.0100 0.39
0.014 0.0075 0.38
0.16
0.15
0.244
0.228
0.039 0.028
0.016 0.020
0.028
0.012
inches
0.069
0.01 0.004
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT109-1
076E07
MS-012
Fig 13. Package outline SOT109-1 (SO16)
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
15 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
SOT338-1
D
E
A
X
c
y
H
v
M
A
E
Z
9
16
Q
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
8
1
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
p
p
1
2
3
E
max.
8o
0o
0.21
0.05
1.80
1.65
0.38
0.25
0.20
0.09
6.4
6.0
5.4
5.2
7.9
7.6
1.03
0.63
0.9
0.7
1.00
0.55
mm
2
0.25
0.65
1.25
0.2
0.13
0.1
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT338-1
MO-150
Fig 14. Package outline SOT338-1 (SSOP16)
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
16 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
D
E
A
X
c
y
H
v
M
A
E
Z
9
16
Q
(A )
3
A
2
A
A
1
pin 1 index
θ
L
p
L
1
8
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(2)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
1
2
3
p
E
p
max.
8o
0o
0.15
0.05
0.95
0.80
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
6.6
6.2
0.75
0.50
0.4
0.3
0.40
0.06
mm
1.1
0.65
0.25
1
0.2
0.13
0.1
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-18
SOT403-1
MO-153
Fig 15. Package outline SOT403-1 (TSSOP16)
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
17 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
15. Revision history
Table 10: Revision history
Document ID
Release
date
Data sheet status
Change notice Doc. number
Supersedes
74HC283_3
20041111 Product data sheet
-
9397 750 13811 74HC_HCT283_CNV_2
Modifications:
• The format of this data sheet has been redesigned to comply with the current presentation
and information standard of Philips Semiconductors.
• Removed type number 74HCT283.
• Inserted family specification.
74HC_HCT283_CNV_2 19970828 Product specification -
-
-
74HC_HCT283_1
-
74HC_HCT283_1
19901201 Product specification -
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
18 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
16. Data sheet status
Level Data sheet status[1] Product status[2] [3]
Definition
I
Objective data
Development
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1]
[2]
Please consult the most recently issued data sheet before initiating or completing a design.
The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3]
For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
17. Definitions
18. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
19. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 13811
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 11 November 2004
19 of 20
74HC283
Philips Semiconductors
4-bit binary full adder with fast carry
20. Contents
1
2
3
4
5
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3
6
6.1
6.2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 4
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 5
7
7.1
8
Functional description . . . . . . . . . . . . . . . . . . . 5
Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Recommended operating conditions. . . . . . . . 6
Static characteristics. . . . . . . . . . . . . . . . . . . . . 7
Dynamic characteristics . . . . . . . . . . . . . . . . . . 9
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Application information. . . . . . . . . . . . . . . . . . 12
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 18
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 19
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Contact information . . . . . . . . . . . . . . . . . . . . 19
9
10
11
12
13
14
15
16
17
18
19
© Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 11 November 2004
Document number: 9397 750 13811
Published in The Netherlands
相关型号:
74HC283PW-T
IC HC/UH SERIES, 4-BIT ADDER/SUBTRACTOR, TRUE OUTPUT, PDSO16, 4.40 MM, PLASTIC, MO-153, SOT-403-1, TSSOP-16, Arithmetic Circuit
NXP
©2020 ICPDF网 联系我们和版权申明