TDA10046HT [NXP]

Single-chip DVB-T channel; 单芯片DVB- T信道
TDA10046HT
型号: TDA10046HT
厂家: NXP    NXP
描述:

Single-chip DVB-T channel
单芯片DVB- T信道

文件: 总3页 (文件大小:328K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TDA10046HT  
Single-chip DVB-T channel  
decoder  
Delivering a low cost system solution for DVB-T channel  
decoding, the TDA10046HT single chip channel decoder  
demonstrates Philips Semiconductors’ continuing leader-  
ship in digital broadcast reception, offering advanced features  
such as adaptive echo cancellation, fast channel scanning and  
a unique ‘Pulse Killer’ algorithm that reduces impulsive noise  
disturbances.  
S e m i c o n d u c t o r s  
The TDA10046HT performs all DVB-T channel decoding functions  
from IF input to transport stream output, using an internal DSP core for  
synchronization and control.Thanks to its sharp adjacent channel digital  
ilter, this single-chip receiver achieves excellent performance with low  
cost tuners (one SAW only). It requires only a low cost crystal oscillator  
(4 MHz) as a clock source, which can be shared with the tuner.  
sampling of the 1st or 2nd IF by a 10-bit ADC, the signal is converted to  
baseband and passes through the FFT demodulator. Channel frequency  
response is then estimated and iltered in both time and frequency  
After  
domains, and used to equalize the signal.  
correction handles tuner phase noise.  
A common phase error  
The TDA10046HT implements a number of advanced features including a  
high-performance ‘Pulse Killer’ algorithm to reduce the disturbing effects  
of short and strong impulsive noise interference caused by electrical  
domestic devices and/or car trafic. For maximum ease of use, the  
TDA10046HT features fully automatic transmission parameters detection,  
ultra fast scan of the whole UHF/VHF band, and fast zapping facilities.  
Key features  
• 2K and 8K COFDM demodulator, fully ETS 300-744 compliant  
2
• TPS and Cell Identiier I  
• 2nd or 1st IF analog input  
C-bus readable  
• On chip 10-bit ADC and PLL  
Evaluation boards are available with most commercial tuners.They are  
provided with all the necessary software including a tailored Graphical  
User Interface (GUI) that allows easy evaluation and development.  
• Single or dual AGC loop (with programmable takeover point)  
• Adjacent channel digital iltering (only one external SAW ilter is required)  
• Automatic frequency offset detection (±1, 2 or 3 standard offsets)  
• Dynamic FFT window positioning, and adaptive echo equalization  
• Consolidated algorithm for impulsive noise reduction  
• DSP based synchronization enables on the ly irmware upgrades  
• No extra-host software required  
• Fast UHF/VHF band scanning  
• Simultaneous tri-state parallel and serial Transport Stream interfaces  
• 4 GPIO pins with ∑  
• I2C-bus interface  
modulator Applications  
• Integrated Digital TV (iDTV)  
• 5V tolerant I/O pins  
• Set-Top-Boxes (STB)  
• Low power consumption (450mW)  
• TQFP64 package, CMOS 0.18 µm technology  
• Personal Video Recorder (PVR) with DVB-T reception  
• Digital TV PCI card for Personal Computers  
TDA10046HT  
Single-chip DVB-T channel decoder  
w w w. s e m i c o n d u c t o r s . p h i l i p s . c o m  
10-BIT  
ADC  
TIME/FREQUENCY  
CHANNEL ESTIMATOR  
CORRECTOR  
st  
nd  
1
or 2 IF  
IQ CONVERSION  
& ACI FILTERING  
FFT  
DVB-T  
FEC  
TS  
DEMODULATOR  
RF AGC  
(optional)  
IF AGC  
DUAL  
AGC  
DSP  
Tuner  
Quiet I C  
2
TDA10046  
I C  
PLL  
XO  
NCO  
SYNCHRONIZATION  
JTAG  
2
MSD887  
Evaluation software with Graphical User Interface  
Channel frequency response  
Philips Semiconductors  
Philips Semiconductors is a worldwide company with over 100 sales ofices  
in more than 50 countries. For a complete up-to-date list of our sales ofices  
please e-mail sales.addresses@www.semiconductors.philips.com.  
A complete list will be sent to you automatically.  
You can also visit our website http://www.semiconductors.philips.com/sales.  
© Koninklijke Philips Electronics N.V. 2002  
All rights reserved. Reproduction in whole or in part is prohibited without the prior  
written consent of the copyright owner.The infor-mation presented in this document  
does not form part of any quota-tion or contract, is believed to be accurate and reliable  
and may be changed without notice. No liability will be accepted by the publisher for  
any  
consequence of its use. Publication thereof does not convey nor imply any license  
patent- or other industrial or intellectual property rights.  
under  
Date of release: May 2002  
Document order number: 9397 750 09522  
Published in The Netherlands  

相关型号:

TDA1005A

FREQUENCY MULTIPLEX PLL STEREO DECODER
NXP

TDA1005AT

FREQUENCY MULTIPLEX PLL STEREO DECODER
NXP

TDA1006A

MOTOR REGULATOR WITH AUTOMATIC TAPE END INDICATOR
ETC

TDA10085

Single chip DVB-S/DSS channel receiver
NXP

TDA10085HT

Single chip DVB-S/DSS channel receiver
NXP

TDA1010

6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications
NXP

TDA1010A

6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications
NXP

TDA1010A

Audio Amplifier, 9W, 1 Channel(s), 1 Func, Bipolar, PSIP9
YAGEO

TDA1010A-T

Audio Amplifier, 9W, 1 Channel(s), 1 Func, Bipolar, PSIP9
YAGEO

TDA1010AU

暂无描述
NXP

TDA1011

2 to 6 W audio power amplifier
NXP

TDA1011A

2 to 5W audio power amplifier with preamplifier
NXP