TDA19978AHV/15,557 [NXP]
SOT612-3 Package, Standard Marking, Tray Dry Pack,Bakeable,Multiple;型号: | TDA19978AHV/15,557 |
厂家: | NXP |
描述: | SOT612-3 Package, Standard Marking, Tray Dry Pack,Bakeable,Multiple |
文件: | 总10页 (文件大小:82K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TDA19978A
Quad HDMI 1.4a receiver interface with equalizer (HDTV up to
1080p, up to UXGA for PC’s format)
Rev. 4 — 6 December 2010
Product data sheet
1. General description
The TDA19978A is a four input HDMI 1.4a compliant receiver with embedded EDID
memory. The built in auto-adaptive equalizer improves signal quality and allows the use of
cable lengths up to 25 m (laboratory tested with a 0.5 mm (24 AWG) cable at
2.05 gigasamples per second). The HDCP key set is stored in non-volatile One Time
Programmable (OTP) memory for maximum security. In addition, the TDA19978A is
delivered with software drivers to ease configuration and use.
The TDA19978A supports:
• TV resolutions:
– 480i (1440 × 480i at 60 Hz), 576i (1440 × 576i at 50 Hz) to HDTV (up to
1920 × 1080p at 50/60 Hz)
– WUXGA (1920 × 1200p at 60 Hz) reduced blanking format
• PC resolutions:
– VGA (640 × 480p at 60 Hz) to UXGA (1600 × 1200p at 60 Hz)
• Deep Color mode in 10-bit and 12-bit (up to 205 MHz TMDS clock)
• Gamut boundary description
• IEC 60958/IEC 61937, One Bit Audio (in SACD), DST (in compressed DSD) and HBR
stream
The TDA19978A includes:
• An enhanced PC and TV format recognition system
• Generation of a 128/256/512 × fs system clock allowing the use of simple audio DACs
without an integrated PLL (such as the UDA1334BTS)
• An embedded oscillator (an external crystal can also be used)
• Improved audio clock generation using an external reference clock
• One Bit Audio (in SACD), DST (in compressed DSD) and HBR stream support
The TDA19978A converts HDMI streams with or without HDCP into RGB or YCbCr digital
signals. The YCbCr digital output signal can be 4:4:4 or 4:2:2 semi-planar format based
on the ITU-R BT.601 standard or 4:2:2 based on the ITU-R BT.656 format. The device can
adjust the output timing of the video port by altering the values for tsu(Q) and th(Q). In
addition, all settings are controllable using the I2C-bus.
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
2. Features and benefits
Complies with the HDMI 1.4a, DVI 1.0, CEA-861-D and HDCP 1.4 standards
Four (quad) independent HDMI inputs, up to the HDMI frequency of 205 MHz
Embedded auto-adaptive equalizer on all HDMI links
EDID memory: 253 shared bytes and three bytes dedicated to each HDMI input
Supports color depth processing (8-bit, 10-bit or 12-bit per color)
Color gamut metadata packet with interrupt on each update, readable via the I2C-bus
Up to four S/PDIF or I2S-bus outputs (eight channels) at a sampling rate up to 192 kHz
with IEC 60958/IEC 61937 stream
HBR audio stream up to 768 kHz with four demultiplexed S/PDIF or I2S-bus outputs
HBR streams (compatible with DTS-HD master audio and Dolby TrueHD up to eight
channels due to HBR packet for stream with a frame rate up to 768 kHz) support
DSD and DST audio stream up to six DSD channels output for SACD with DST Audio
Packet support
Channel status decoder supports multi-channel reception
Improved audio clock generation using an external reference clock
System/master clock output (128/256/512 × fs) enables the use of the UDA1334BTS
The HDMI interface supports:
All HDTV formats up to 1920 × 1080p at 50/60 Hz and WUXGA (1920 × 1200p at
60 Hz) with support for reduced blanking
3D formats including all primary formats up to 1920 × 1080p at 30 Hz Frame
Packing and 1920 × 1080p at 60 Hz Top-and-Bottom
PC formats up to UXGA (1600 × 1200p at 60 Hz)
Embedded oscillator (an external crystal can be used)
Frame and field detection for interlaced video signal
Sync timing measurements for format recognition
Improved system for measurements of blanking and video active area allowing an
accurate recognition of PC and TV formats
HDCP with repeater capability
Embedded non-volatile memory storage of HDCP keys
Programmable color space input signal conversion from RGB-to-YCbCr or
YCbCr-to-RGB
Output formats: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 semi-planar based on the
ITU-R BT.601 standard and YCbCr 4:2:2 ITU-R BT.656
8-bit, 10-bit or 12-bit output formats selectable using the I2C-bus (8-bit and 10-bit only
in 4:4:4 format)
I2C-bus adjustable timing of video port (tsu(Q) and th(Q)
)
Downsampling-by-two with selectable filters on Cb and Cr channels in 4:2:2 mode
Internal video and audio pattern generator
Controllable using the I2C-bus; 5 V tolerant and bit rate up to 400 kbit/s
DDC-bus inputs 5 V tolerant and bit rate up to 400 kbit/s
LV-TTL outputs
Power-down mode
CMOS process
1.8 V and 3.3 V power supplies
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
2 of 10
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
Lead-free (Pb) HLQFP144 package
3. Applications
HDTV
High-End TV
YCbCr or RGB HI-Speed video digitizer
Projector, plasma and LCD TV
Rear projection TV
Home theater amplifier
DVD recorder
AVR and HDMI splitter
4. Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min
Typ Max Unit
Digital inputs: pins RXxC+, RXxC− [1]
fclk(max)
maximum clock frequency
205
-
-
MHz
Clock timing output: pins VCLK, ACLK and SYSCLK
fclk(max)
maximum clock frequency
pin VCLK
165
25
-
-
-
-
-
-
MHz
MHz
MHz
pin ACLK
pin SYSCLK
50
Supplies
VDDH(3V3) HDMI supply voltage (3.3 V)
VDDH(1V8) HDMI supply voltage (1.8 V)
VDDI(3V3) input supply voltage (3.3 V)
VDDC(1V8) core supply voltage (1.8 V)
VDDO(3V3) output supply voltage (3.3 V)
3.135 3.3 3.465 V
1.71 1.8 1.89
3.135 3.3 3.465 V
1.71 1.8 1.89
3.135 3.3 3.465 V
V
V
[2]
P
power dissipation
active mode
720p at 60 Hz
-
-
-
0.75 -
1.13 -
1.63 -
W
W
W
1080p at 60 Hz
1080p at 60 Hz; Deep Color mode
Power-down mode
Pcons
power consumption
pin PD = HIGH
I2C-bus; EDID and HDCP memory power-up
I2C-bus; EDID; activity detection and HDCP
memory power-up
-
-
-
1
-
-
-
mW
mW
mW
4
150
[1] x = A, B, C or D.
[2] At 30 % activity on video port output.
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
3 of 10
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
5. Ordering information
Table 2.
Ordering information
Type number
Package
Name
Description
Version
TDA19978AHV
HLQFP144 plastic thermal enhanced low profile quad flat
package; 144 leads; body 20 × 20 × 1.4 mm;
exposed die pad
SOT612-3
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
4 of 10
xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x
WS/AP4
HDMI A (channels 0/1/2)
TERMINATION
RESISTANCE
CONTROL
AP0 to AP3
ACLK
AUDIO
PLL
AUDIO
FORMATTER
HDMI A (channel A)
RRX1
EQUALIZER
SYSCLK/AP5
HDMI B (channels 0/1/2)
HDMI B (channel B)
TERMINATION
RESISTANCE
CONTROL
OTP
MEMORY
PACKET
EXTRACTION
AUDIO
FIFO
HDMI C (channels 0/1/2)
HDMI C (channel C)
RRX2
TERMINATION
RESISTANCE
CONTROL
VP[29:0]
VCLK
HDMI
RECEIVER
AND
COLOR
DEPTH
UNPACKING
VIDEO
OUTPUT
FORMATTER
EQUALIZER
HDCP
HDMI D (channels 0/1/2)
HDMI D (channel D)
TERMINATION
RESISTANCE
CONTROL
XTALIN/MCLK
XTALOUT
EDID
MEMORY
POWER
MANAGEMENT
CRYSTAL
OSCILLATOR
TDA19978A
DE
SYNC
TIMING
MEASUREMENT
VHREF
TIMING
GENERATOR
HS/HREF
VS/VREF
CS/FREF
2
I C-BUS SLAVE
INTERFACE
SDA/SCL
HSDAA/ HSDAB/ HSDAC/ HSDAD/
HSCLA HSCLB HSCLC HSCLD
001aah366
Fig 1. Block diagram
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
7. Limiting values
Table 3.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VDDx(3V3)
VDDx(1V8)
ΔVDD
IO
Parameter
Conditions
Min
−0.5
−0.5
−0.5
-
Max
+4.6
+2.5
+0.5
35
Unit
V
supply voltage on all 3.3 V pins
supply voltage on all 1.8 V pins
supply voltage difference
output current
V
V
mA
°C
°C
°C
V
Tstg
storage temperature
ambient temperature
junction temperature
−55
0
+150
70
Tamb
Tj
-
125
VESD
electrostatic discharge voltage HBM
−2000
+2000
8. Abbreviations
Table 4.
Acronym
AVR
Abbreviations
Description
Audio Video Receiver
CMOS
DAC
Complementary Metal-Oxide-Semiconductor
Digital-to-Analog Converter
Display Data Channel bus
Direct Stream Digital
DDC-bus
DSD
DST
Direct Stream Transfer
DTS-HD
DVD
Digital Theater Systems HD
Digital Versatile Disc
DVI
Digital Video Interface
EDID
HBM
Extended Display Identification Data
Human Body Model
HBR
High-Bitrate
HD
High-Definition
HDCP
HDMI
HDTV
LV-TTL
OTP
High-bandwidth Digital Content Protection
High-Definition Multimedia Interface
High-Definition TeleVision
Low Voltage Transistor-Transistor Logic
One Time Programmable
Phase-Locked Loop
PLL
RGB
Red Green Blue
SACD
S/PDIF
SYNC
TMDS
UXGA
Super Audio CD
Sony/Philips Digital Interface Format
SYNChronization
Transition Minimized Differential Signaling
Ultra eXtended Graphics Array
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
6 of 10
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
Table 4.
Abbreviations …continued
Acronym
VHREF
VGA
Description
Vertical Horizontal REFerence
Video Graphics Array
WUXGA
YCbCr
Wide Ultra eXtended Graphics Array
Y = Luminance, Cb = Chroma blue, Cr = Chroma red
9. Revision history
Table 5.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
TDA19978A_SDS v.4
Modifications:
20101206
Product data sheet
-
TDA19978A_SDS v.3
• Replaced in all document HDMI 1.3a with HDMI 1.4a
• Replaced in all document HDCP 1.2 with HDCP 1.4
TDA19978A_SDS v.3
TDA19978A_SDS v.1
20100511
Product data sheet
-
TDA19978A_SDS v.1[1]
-
20080528
Objective data sheet
-
[1] Revision 2 is not available.
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
7 of 10
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
10. Legal information
10.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
10.2 Definitions
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
10.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
8 of 10
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
10.4 Licenses
Purchase of NXP ICs with HDMI technology
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
Use of an NXP IC with HDMI technology in equipment that complies with
the HDMI standard requires a license from HDMI Licensing LLC, 1060 E.
Arques Avenue Suite 100, Sunnyvale CA 94085, USA, e-mail:
admin@hdmi.org.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
10.5 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I2C-bus — logo is a trademark of NXP B.V.
11. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
TDA19978A_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 4 — 6 December 2010
9 of 10
TDA19978A
NXP Semiconductors
Quad HDMI 1.4a receiver with digital processing)
12. Contents
1
2
3
4
5
6
7
8
9
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 2
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quick reference data . . . . . . . . . . . . . . . . . . . . . 3
Ordering information. . . . . . . . . . . . . . . . . . . . . 4
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 7
10
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10.1
10.2
10.3
10.4
10.5
11
12
Contact information. . . . . . . . . . . . . . . . . . . . . . 9
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 6 December 2010
Document identifier: TDA19978A_SDS
相关型号:
TDA19978B
Quad HDMI 1.3a receiver interface with equalizer (HDTV up to 1080p, up to UXGA for PC formats)
NXP
TDA19978BHV
Quad HDMI 1.3a receiver interface with equalizer (HDTV up to 1080p, up to UXGA for PC formats)
NXP
TDA19978BHV/15/C1
IC SPECIALTY CONSUMER CIRCUIT, PQFP144, 20 X 20 MM, 1.40 MM HEIGHT, LEAD FREE, PLASTIC, MS-026, SOT612-3, HLQFP-144, Consumer IC:Other
NXP
TDA19989
150 MHz pixel rate HDMI 1.3 transmitter with 3 × 8-bit video inputs, HDCP and CEC support
NXP
TDA19989AET
150 MHz pixel rate HDMI 1.3 transmitter with 3 × 8-bit video inputs, HDCP and CEC support
NXP
TDA19989AET/C1,551
IC IC,TV/VIDEO CIRCUIT,AUDIO/VIDEO DECODER FOR MPEG,BGA,64PIN,PLASTIC, Consumer IC:Other
NXP
TDA19989AET/C101,5
IC IC,TV/VIDEO CIRCUIT,AUDIO/VIDEO DECODER FOR MPEG,BGA,64PIN,PLASTIC, Consumer IC:Other
NXP
©2020 ICPDF网 联系我们和版权申明