D4CC-1031 [OMRON]

Snap Acting/Limit Switch, SPDT, Momentary, 4.8mm, Wire Terminal, Sealed Pin Plunger Actuator, Panel Mount;


型号：	D4CC-1031
厂家：	OMRON ELECTRONICS LLC
描述：	Snap Acting/Limit Switch, SPDT, Momentary, 4.8mm, Wire Terminal, Sealed Pin Plunger Actuator, Panel Mount 开关光电二极管
文件：	总12页 (文件大小：363K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

D4CC

Slim Connector-Ready Limit Switches

D4CC

Compact, Enclosed Limit Switch

ꢀ Connector-ready for quick replacement

ꢀ New center roller lever model for

compact installation and gang

mounting

ꢀ Triple-seal construction meets UL

Types 3, 4, and 13

ꢀ Panel-mount types available

ꢀ Microchange™ connector cordsets

available

ꢀ UL/CSA approvals

Ordering Information

ꢀ LIMIT SWITCHES

Actuator

Part Number

1 A at 125 VAC

D4CC-1001

D4CC-1002

D4CC-1003

D4CC-1010

D4CC-1024

D4CC-1031

D4CC-1032

D4CC-1033

D4CC-1041

D4CC-1042

D4CC-1043

D4CC-1050

D4CC-1060

1 A at 30 VDC

D4CC-3001

D4CC-3002

D4CC-3003

D4CC-3010

D4CC-3024

D4CC-3031

D4CC-3032

D4CC-3033

D4CC-3041

D4CC-3042

D4CC-3043

D4CC-3050

D4CC-3060

Pin plunger

Roller plunger

Cross roller plunger

Bevel plunger

Low operating force roller lever

Sealed plunger

Sealed roller plunger

Sealed cross roller plunger

Panel mount pin plunger

Panel mount roller plunger

Panel mount cross roller plunger

Plastic rod

Center roller lever

MicroChange–Reg TM Woodhead Industries

Part Numbers for LED Models:

AC: Substitute a number 2 for the number 1 in the Part Number. Example: D4CC-2001

DC: Substitute a number 4 for the number 3 in the Part Number. Example: D4CC-4001

D4CC

ꢀ ACCESSORIES

Description

Part number

For AC limit switches

For DC limit switches

2 m (6.56 ft) cable length

5 m (16.40 ft) cable length

2 m (6.56 ft) cable length

5 m (16.40 ft) cable length

For D4CC-ꢀ001

XS2F-A421-D90-A

XS2F-A421-G90-A

XS2F-D421-D80-A

XS2F-D421-G80-A

D4CC-P001

Connector cordsets,

with straight connector,

4-conductor

Panel mounting adapters to replace standard size

(WL) limit switches with D4CC

For D4CC-ꢀ002

D4CC-P002

For D4CC-ꢀ020

D4CC-P020

Construction

Specifications

ꢀ RATINGS

Rated voltage

Non-inductive load (A)

Resistive load Lamp load

Inductive load (A)

Inductive load

Inrush current (A)

Motor load

1 A

5 A

125 VAC

30 VDC

0.7 A

1 A

2.5 max.

Note: 1. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).

2. Lamp loads have an inrush current of 10 times the steady-state current.

3. Motor loads have an inrush current of 6 times the steady-state current.

D4CC

ꢀ CHARACTERISTICS

Enclosure ratings

Types 3, 4 and 13

NEMA

IEC 144

Types 1, 3, 3R, 4, 5, 6, 12 and 13

IP67

Mechanical life

10,000,000 operations min.

-10°C to 70°C (14°F to 158°F)

10 to 55 Hz, 1.5 mm (0.06 in) double amplitude

Approx. 50 G

Ambient operating temperature

Vibration

Shock

Malfunction durability

Mechanical durability

Approx. 100 G

ꢀ OPERATING CHARACTERISTICS

Legend: OF = Operating Force (max.); RF = Reset Force (min.); OT = Overtravel (min.); PT = Pretravel

MD = Movement Differential (max.); TT = Total Travel; OP = Operating Position

Part number

OF max.

RF min.

OT min.

PT max.

MD max.

D4CC-ꢀ001

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

1.8 mm

(0.07 in)

15.7 ±1 mm

(0.62 ±0.04 in)

D4CC-ꢀ002

D4CC-ꢀ003

D4CC-ꢀ010

D4CC-ꢀ024

D4CC-ꢀ031

D4CC-ꢀ032

D4CC-ꢀ033

D4CC-ꢀ041

D4CC-ꢀ042

D4CC-ꢀ043

D4CC-ꢀ050

D4CC-ꢀ060

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

1.8 mm

(0.07 in)

28.5 ±1 mm

(1.12 ±0.04 in)

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

1.8 mm

(0.07 in)

28.5 ±1 mm

(1.12 ±0.04 in)

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

1.8 mm

(0.07 in)

28.5 ±1 mm

(1.12 ±0.04 in)

0.58 kg

(20.46 oz)

0.15 kg

(5.29 oz)

50°

10°+3°

3°

10°+3°

—

1.8 kg

(63.49 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

5 mm

(0.20 in)

24.9 ±1 mm

(0.98 ±0.04 in)

1.8 kg

(63.49 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

5 mm

(0.20 in)

34.3 ±1 mm

(1.35 ±0.04 in)

1.8 kg

(63.49 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

5 mm

(0.20 in)

34.3 ±1 mm

(1.35 ±0.04 in)

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

5 mm

(0.20 in)

31.2 ±1 mm

(1.23 ±0.04 in)

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

5 mm

(0.20 in)

36.8 ±1 mm

(1.45 ±0.04 in)

1.2 kg

(42.33 oz)

0.45 kg

(15.87 oz)

3 mm

(0.12 in)

1.8 mm

(0.07 in)

0.2 mm

(0.008 in)

5 mm

(0.20 in)

36.8 ±1 mm

(1.45 ±0.04 in)

0.15 kg

(5.29 oz)

—

15°

—

0.68 kg

(23.99 oz)

0.15 kg

(5.29 oz)

50°

10°+3°

3°

D4CC

Engineering Data

ꢀ ELECTRICAL SERVICE LIFE

ꢀꢀꢀCONTACT RATINGS

NEMA B300

ꢀꢀꢀCONTACT RESISTANCE

100 mΩ

ꢀꢀꢀELECTRICAL APPROVALS

UL Recognized, File No. E76675

CSA Certified, File No. LR45746

Note: Approvals pending for DC types

Switching current (mA)

Operation

ꢀ CONTACT FORM

Connector pin

AC type

DC type

Dimensions

Unit: mm (inch)

ꢀ LIMIT SWITCHES

Plunger Switches

D4CC- 001

ꢀ

D4CC

Roller Plunger Switches

D4CC- 002

ꢀ

Cross Roller Plunger Switches

D4CC- 003

Bevel Plunger Switches

D4CC- 010

ꢀ

D4CC

Unit: mm (inch)

Roller Lever Switches

D4CC- 024

ꢀ

Sealed Plunger Switches

D4CC- 031

Sealed Roller Plunger Switches

D4CC- 032

ꢀ

D4CC

Sealed Cross Roller Plunger Switches

D4CC- 033

ꢀ

Panel-Mount Pin Plunger Switches

D4CC- 041

Panel-Mount Roller Plunger Switches

D4CC- 042

ꢀ

D4CC

Unit: mm (inch)

Panel-Mount Cross Roller Switches

D4CC- 043

ꢀ

Plastic Rod Switches

D4CC- 050

Center Roller Lever Switches

D4CC- 060

D4C-P001 (For D4CC- 001)

ꢀ

D4C-P002 (For D4CC- 002)

ꢀ

D4CC

ꢀ CONNECTOR CABLES

Y96E-44SA

ꢀ

(AC)

Y96E-44SD

ꢀ

(DC)

AC Type

DC Type

ꢀ SPECIAL MOUNTING PLATES

Note: Four hexagonal flat head bolts (M5 x 0.8,

length: 10) and two hexagonal head

bolts (M5 x 0.8, length: 15) are included.

*All the holes with 5.2+0.2/0 dia. must be used

with M5 x 10 hexagonal head bolts.

**All the M5-tapped holes must be used with M5

hexagonal flat head bolts.

D4CC

Unit: mm (inch)

D4C-P020 (For D4CC- 020)

ꢀ

Note: Four hexagonal flat head bolts (M5 x 0.8,

length: 10) and two hexagonal head

bolts (M5 x 0.8, length: 15) are included.

*All the holes with 5.2+0.2/0 dia. must be used

with M5 x 10 hexagonal head bolts.

**All the M5-tapped holes must be used with M5

hexagonal flat head bolts.

D4CC

Installation

ꢀ MOUNTING HOLES

ꢀ OPERATION

Secure the switch to the mounting panel with M5 hexagonal head

bolts and washers with a tightening torque of 50 to 60 kg•cm

(34.4 to 41.3 in•lbs).

The method and frequency of operation, the shape of the cam

and dog, and the overtravel value have a significant influence on

the service life and precision of a D4CC Limit Switch. For this

reason, the dog angle must be 30° max.; the surface roughness

of the dog must be 6.3 microns max.; and, the hardness of the

dog must be about Hv450.

To allow the plunger actuator to travel properly, adjust the

position of the pin, roller, or bevel plunger with the dog or cam

stroke so that the plunger is displaced to the groove part of the

plunger (correct setting position) properly.

ꢀ GANG MOUNTING SWITCHES

A maximum of six switches can be gang mounted. In this case,

the convex part of the gang-mount guide on a switch must fit into

the concave part of the guide on another switch as shown in the

figure. A mounting panel with a thickness of 6 mm min. should be

used.

To allow the roller lever actuator to travel properly, adjust the

position of the lever with the dog or cam stroke so that the

arrowhead of the lever is positioned between the two convex

markers as shown. The arrowhead indicates the proper stroke

travel.

The D4CC is designed so that gang mounted switches are

physically secure to one another.

Secure the head of a D4CC Limit Switch with a tightening torque

of 3.5 to 4.5 kg•cm (2.4 to 3.1 in•lbs) after changing the position

of the head.

D4CC

To allow the center roller lever actuator to travel properly, adjust

the position of the lever with the dog or cam stroke so that part A

(the convex part) of the lever is positioned in the convex part of

the head.

ꢀ ENVIRONMENT

Avoid using D4CC Limit Switches in steamy places or where

subject to hot water (70°C or higher).

ꢀ SPECIAL MOUNTING PLATE

The D4CC is a SPDT limit switch for standard loads. The WLA_

cannot be replaced with a D4CC Limit Switch since the WLA_

contacts are normally open.

There is no difference in dimension between the mounting holes

of the WL and those of the D4CC. The D4CC is, however, thinner

than the WL model. Thus space can be saved if WL Limit

Switches are replaced with D4CC Limit Swithces mounted on

Special Mounting Plates.

Refer to the following figure to set the stroke of a D4CC Limit

Switch mounted on a panel.

The bottom of the enclosed switch at the cable outlet is resin-

molded. Secure the cable at a point 5 cm from the switch bottom

to prevent exertion of excess force on the cable.

Turn screw B clockwise by hand to secure it with part C so that

part C is covered with scerw B until the width of A is nearly zero.

If the tightening force is not enough, the screw can be loosened

by vibration. Do not use pliers to tighten the screw, or the

connector could be broken. Always tighten the screw securely

by hand.

OMRON ELECTRONICS LLC

One East Commerce Drive

Schaumburg, IL 60173

OMRON ON-LINE

OMRON CANADA, INC.

885 Milner Avenue

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.com/oci

Scarborough, Ontario M1B 5V8

1-800-55-OMRON

416-286-6465

Cat. No. CEDSAX4

11/01

Specifications subject to change without notice.

Printed in the U.S.A.

D4CC-1031 [OMRON]

相关型号：

D4CC-1032

D4CC-1033

D4CC-1050

D4CC-1060

D4CC-2001

D4CC-2002

D4CC-2031

D4CC-2032

D4CC-2050

D4CC-2060

D4CC-3001

D4CC-3002