E2K-F10MC2-A [OMRON]
Capacitive Sensor, 4mm Min, 10mm Max, 100mA, Flat Pack, Panel Mount;型号: | E2K-F10MC2-A |
厂家: | OMRON ELECTRONICS LLC |
描述: | Capacitive Sensor, 4mm Min, 10mm Max, 100mA, Flat Pack, Panel Mount 传感器 换能器 |
文件: | 总6页 (文件大小:681K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Flat Type Capacitive Proximity Sensor
E2K-F
Low-profiled Capacitive
Proximity Sensor providing
Flexible Installation
Ordering Information
Shape
Sensing distance
Output specifications
DC 3-wire NPN
Operating status
NO
Model
E2K-F10MC1
E2K-F10MC2
10 mm
NC
NO
NC
Flat type
Unshielded
E2K-F10MC1-A
E2K-F10MC2-A
4 to 10 mm
Rating/Performance
E2K-F10MC1
E2K-F10MC2
E2K-F10MC1-A
E2K-F10MC2-A
4 to 10 mm 10%
Item
Sensing distance
Setting distance
10 mm 10%
0 to 7.5 mm
Differential distance
Sensing object
Standard sensing object
Response frequency
15% max. sensing distance
Conductors and dielectrics
with grounded metal: 50 x 50 x 1 mm
100 Hz
Rated supply voltage
(operating voltage)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption
10 mA max. (24VDC)
Control
output
Switching capacity
Residual voltage
NPN open collector 100 mA max. (under 30 VDC)
1.5 V max. (under load current of 100 mA with cable length of 2 m)
Detection indicator (red LED)
Indicator lamp
Operating status (with sensing
object approaching)
NO
Protective circuits
Ambient temperature
Ambient humidity
Reverse connection protection, surge absorber
Operating/Storage: -10°C to 55°C (with no icing or condensation)
Operating/Storage: 35% to 95%RH
Temperature influence
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
15% max. of sensing distance at 23°C within the temperature range of -10°C and 55°C
2.5% max. of sensing distance within a range of 10% of rated supply voltage
50 M min. (at 500 VDC) between energized parts and case
500 VAC 50/60 Hz for 1 min between energized part and case
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Protective structure
Connection method
Weight (Packed state)
IEC 60529 IP66
Pre-wired models (standard length: 2 m)
Approx. 35 g
IEC 60529 IP64
Case
Sensing surface
Material
Heat-resistant ABS resin
Instruction manual
Accessories
E2K-F
D-189
Characteristic data (typical)
Output Circuit Diagram
Sensing Distance vs. Sensing Object
10
9
NO Type
Yes
No
Sensing object
Grounded metal (t=1)
8
Operating
Chart
ON
Output transistor
(load)
7
6
OFF
ON
Operation indicator
(red)
OFF
Ungrounded metal (t=10)
5
4
3
2
Brown
+V
100W
Load
Glass
(t=10)
Phenol resin
(t=10)
1
*
Brack
Main
circuit
Output
Output circuit
0
10
20
30
40
50
60
70 80
Sensing object size (mm)
Blue
0V
* 100 mA max. (load current)
Precautions
Mutual Interference
Correct Use
If installing more than one E2K-F face to face or side by side,
separate them as shown below.
Design
Sensing Object Material
E2K-F can detect almost any type of object. The sensing dis-
tance of E2K-F, however, will vary with the electrical charac-
teristics of the object, such as the conductance and
inductance of the object, as well as the water content and ca-
pacity of the object. The maximum sensing distance of E2K-F
will be available if the object is made of grounded metal.
There are objects that cannot be detected indirectly. There-
fore test E2K-F in a trial operation with the objects before us-
ing E2K-F in actual applications.
40mm
50mm
50mm
Close mounting possible
Face-to-face mounting
Effect of High-frequency Electro-magnetic Field
E2K-F may malfunction if an ultrasonic washer, high-frequen-
cy generator, transceiver, or inverter are nearby.
For a typical measure, refer to the "Noise" with Common pre-
cautions of a photoelectric sensor in Rear B-page.
Effects of Surrounding Metal
Separate E2K-F from ambient metals as shown below.
Wiring Considerations
30mm
The characteristics of E2K-F will not change if the cord is ex-
tended. Keep in mind that voltage drops may occur due to the
cord extension, thus, ensure that the total cord length does
not exceed 200 m.
60mm
45mm
Metal object
Metal object
Metal object
D-190
Capacitive Sensors
Dimensions (Unit: mm)
Mounting Holes
Two, 3.5 dia.
E2K-F
Two, 3.5 dia.
10
*
50 42 34
0.2
42
8
5
Operation indicator
(red)
20
5
10.1
* 2.9-dia. three conductors vinyl-insulated round cable
(cross-sectional area of conductors: 0.14 mm2;
insulation diameter: 0.9 mm)
Standard length: 2 m
E2K-F
D-191
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. D018-E2-02A-X
D-192
Capacitive Sensors
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a.Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and
constitute delivery to Buyer;
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
est in the Products until the full purchase price is paid;
d.Delivery and shipping dates are estimates only; and
e.Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs
user’s programming of a programmable Product, or any consequence thereof.
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
(i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONICS LLC MEXICO SALES OFFICES
1 Commerce Drive
Schaumburg, IL 60173
Tel: 847.843.7900
Mexico, D.F.
(52) 555 660 31 44
Global –
www.omron.com
Ciudad Juárez (52) 656 623 70 83
Monterrey, N.L. (52) 818 377 42 81
USA –
www.omron247.com
Mexicali, B.C.
(52) 686 838 01 15
For U.S. technical support or other
inquiries: 800.556.6766
Canada –
www.omron.ca
BRAZIL SALES OFFICES
Sao Paulo
(55) 11 2101 6300
Brazil –
www.omron.com.br
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
Tel: 416.286.6465
ARGENTINA SALES OFFICES
Cono Sur
(54) 11 4787 1129
CHILE SALES OFFICES
Santiago
(56) 2206 4592
OTHER LATIN AMERICAN SALES
mela@omron.com
07/07
Specifications subject to change without notice
Printed in USA
Cat. No. D018-E2-02A
相关型号:
©2020 ICPDF网 联系我们和版权申明