G7J-2A2B-B-AC24 [OMRON]
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount;型号: | G7J-2A2B-B-AC24 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount 继电器 |
文件: | 总8页 (文件大小:261K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
General Purpose Relay
G7J
• Ideal for 3-phase motor control applications and resistive and
inductive loads.
• No contact chattering for momentary voltage drops up to 50%
of rated voltage.
• Withstands more than 4 kV between contacts that are of
different polarity and between the coil and contacts.
• Flame-resistant materials (UL94V-0) used for all insulation.
• Push-to-test button on all models lets user check contact
operation.
• Class B coil insulation available.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., G7J-3A1B-B-AC100/120).
Type
PCB mounting
Contact form
Model
Quick-connect terminal
Screw terminal
PCB terminal
G7J-4A-P
4PST-NO
—
—
—
—
3PST-NO/SPST-NC
DPST-NO/DPST-NC
4PST-NO
—
G7J-3A1B-P
G7J-2A2B-P
—
W-bracket
(see note)
G7J-4A-T
G7J-3A1B-T
G7J-2A2B-T
G7J-4A-B
3PST-NO/SPST-NC
DPST-NO/DPST-NC
G7J-3A1B-B
G7J-2A2B-B
Note: The G7J-B relays require a W-bracket for mounting. Order the bracket separately below. To order a relay and bracket packed together, add
“-W1” to the part number before the coil voltage suffix. For example, G7J-2A2B-B-W1-AC100/120.
I Accessories
Types
Applicable relays
G7J-4A-B, G7J-3A1B-B, G7J-2A2B-B
Model
W-brackets
R99-04-FOR-G5F
I Typical Applications
Compressors for air conditioners and heater switching controllers.
Switching controllers for power tools or motors.
Lamp controls, motor drivers, and power supply switching controllers in copy machines,
facsimile machines, and other office equipment.
Power controllers for packers or food processing equipment.
Power controllers for inverters.
742
General Purpose Relay G7J
Specifications
I Contact Data
Load
Resistive load (p.f. = 1)
NO
NC
Rated load
25 A, 220 VAC (24 A, 230 VAC), 25 A, 30 VDC
8 A, 220 VAC (7.5 A, 230 VAC), 8 A, 30 VDC
8 A
Rated carry current
Max. switching voltage
Max. switching current
Max. switching capacity
Min. permissible load
25 A
250 VAC,125 VDC
25 A
8 A
5,500 VA, 750 W DC
1,760 VA, 240 W DC
100 mA, 24 VDC at 120 operations/minute, 23°C (73°F) ambient temperature)
I Coil Data
AC
Coil
Rated voltage
(VAC)
Rated
Coil
Must operate
Must release
% of rated voltage
15% min.
Max. voltage
Power
voltage
current (mA)
resistance (Ω)
consumption
24
50
24
75
—
75% max.
110%
Approx.1.8
to 2.6 VA
50
36
—
—
—
100/120
200/240
100 to 120
200 to 240
18 to 21.60
9 to 10.80
75 volts
18 volts
36 volts
132 volts
264 volts
150 volts
DC
Coil
voltage
Rated voltage
(VDC)
Rated
Coil
Must operate
Must release
% of rated voltage
10% min.
Max. voltage
Power
current (mA)
resistance (Ω)
consumption
12
12
167
83
42
20
18
72
75% max.
110%
Approx. 2.0 W
24
24
288
48
48
1150
5000
6050
100
110
100
110
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with tolerances of +15%/-20% for AC rated cur-
rent and 15% for DC coil resistance.
2. Performance characteristic data are measured at a coil temperature of 23°C (73°F).
General Purpose Relay G7J
743
I Coil Internal Circuit
AC operating coil
DC operating coil
A2
A1
A2
A1
As a rule, either a DC battery or a DC power supply with a maximum
of 5% ripple must be used for the operating voltage for DC relays.
Before using a rectified AC supply, confirm that the ripple is not
greater than 5%. Ripple greater than this can lead to variations in
the operating and reset voltages. As excessive ripple can generate
pulses, the insertion of a smoothing capacitor is recommended as
shown below.
The G7J incorporates a bridge rectifier circuit in the AC coil versions
that prevents contact chatter or dropout during a voltage drop. This
circuit allows the relays to withstand, with no vibration or shock, volt-
age drops to the coil of up to 50% of the rated coil voltage for one
second maximum.
Relay
Ripple
E min. E max.
E mean
DC fraction
E max.
−
E min.
x 100
% of ripple =
E mean
E max.:
E min.:
Maximum ripple
Minimum ripple
E mean: Mean DC voltage value
When driving the coil with a transistor, check the leakage current and
connect a bleeder resistor if necessary.
I Characteristics
Contact resistance
50 mΩ max.
50 ms max.
50 ms max.
Operating time
Release time
Operating frequency
Mechanical
Electrical
1,800 operations/hour max.
1,800 operations/hour max.
Insulation resistance
Dielectric strength
1,000 MΩ minimum at 500 VDC
4,000 VAC, 50/60 Hz for 1 minute between coil and contacts
4,000 VAC, 50/60 Hz for 1 minute between contacts of different polarity
2,000 VAC, 50/60 Hz for 1 minute between contacts of the same polarity
10,000 V between coil and contact with 1.2 x 50 µs impulse wave
Impulse withstand voltage
Vibration
Mechanical durability 10 to 55 Hz, 1.50 mm (0.06 in) double amplitude
Malfunction durability NO: 10 to 55 Hz, 1.50 mm (0.06 in) double amplitude
NC: 10 to 26 Hz, 1.50 mm (0.06 in) double amplitude
1000 m/s2 (Approx. 100 G)
NO: 100 m/s2 (Approx. 10 G)
Shock
Mechanical durability
Malfunction durability
NC: 20 m/s2 (Approx. 2 G)
Service life
Mechanical
Electrical
1 million operations minimum at 1,800 operations/hour
100,000 operations minimum at 1,800 operations/hour at rated load
-25° to 60°C (-13° to 140°F) with no icing
35% to 85% RH
Ambient temperature Operating
Humidity
Weight
Operating
PCB terminal
Screw terminal
Approx. 140 g (4.90 oz.)
Approx. 165 g (5.80 oz.)
Note: Data shown are of initial value.
744
General Purpose Relay G7J
I Characteristic Data
Maximum switching capacity
Electrical service life
Switching voltage (V)
Switching current (A)
Dimensions
Unit: mm (inch)
I Relays
PCB Terminals with PCB Mounting
G7J-4A-P, G7J-3A1B-P, G7J-2A2B-P
33.5
(1.319)
max.
16
(0.630)
30
(1.181)
21 0.1
(0.827 0.004)
1.4
(0.055)
11 0.1
(0.433 0.004)
6.4
(0.252)
Twenty 1.8 (0.071) dia.
1.4 (0.055)
1.5 (0.059)
0.8 (0.031)
6 (0.236)
40.4 0.15
(1.591 0.006)
51
(2.008)
max.
30.8 0.15
(1.213 0.006)
21.2 0.1
(0.827 0.004)
11.6 0.1
(0.457 0.004)
51.5 (2.028) max.
2 (0.079)
4 (0.157)
General Purpose Relay G7J
745
Screw Terminals (requires W-bracket for mounting)
G7J-4A-B, G7J-3A1B-B, G7J-2A2B-B
Ten, M3.5
Two, 4.5 (0.177) dia. or M4
34.5
(1.358)
max.
7.6
35 0.1
(0.299)
(1.378 0.004)
4.3
(0.169)
64
(2.520)
max.
55.2
(2.173)
43.2
(1.701)
51.5 (2.028) max.
2 (0.079)
I Accessories
W-Bracket for G7J-B Relays with Screw Terminals
R99-04-FOR-G5F
35
4.5 (0.177) dia.
Two, M4
5)
(1.378 0.004)
)
(0.276)
I Terminal Arrangement – Internal Connections
G7J-4A-P(B)
G7J-3A1B-P(B)
G7J-2A2B-P(B)
746
General Purpose Relay G7J
I Approvals
UL 508 and 1950 (Recognized, File No. E41643)/CSA 22.2 No. 14 (Certified, File No. LR 35535)
Contact arrangement
Normally Open
Load type
Contact ratings
25 A, 277 VAC, 30,000 cycles
Resistive
25 A, 30 VDC, 30,000
General use
25 A, 120 VAC, 30,000 cycles
25 A, 277 VAC, 30,000 cycles
25 A, 240 VAC, 100,000 cycles
1.5 kW, 120 VAC
Tungsten
Motor load
1.5 HP, 120 VAC
3 HP, 240/265/277 VAC
3-phase, 3 hp, 240/265/277 VAC, 30,000 cycles
3-phase, 5 hp, 240/ 265/277 VAC, 30,000 cycles
20 FLA/120 LRA, 120 VAC, 30,000 cycles
17 FLA/102 LRA, 277 VAC, 30,000 cycles
TV-10, 120 VAC
TV
Normally Closed
Resistive
8 A, 277 VAC, 30,000 cycles
8 A, 30 VDC, 30,000 cycles
8 A, 120 VAC, 30,000 cycles
8 A, 277 VAC, 30,000 cycles
General use
Note: 1. The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in
this catalog.
2. In the interest of product improvement, specifications are subject to change without notice.
Precautions
I Handling
I Cleaning PCB Terminals
PCB terminals have semi-sealed construction which prevents flux
from penetrating into the relay base housing due to capillary action.
This type of relay cannot be immersed for cleaning.
• To preserve performance, do not drop or otherwise subject the G7J
relay to shock.
• The case is not designated to be removed during normal handling
and operation. Doing so may affect performance.
• Use the power relay in a dry environment free from excessive dust,
SO2, H2S, or organic gas.
• Do not allow a voltage greater than the maximum allowable coil
voltage to be applied continuously.
I Connection
Refer to the diagram below when connecting a wire to the screw ter-
minals on G7J.
• Do not use the relay outside of specified voltages and currents.
• Do not allow the ambient operation temperature to exceed the
specified limit.
I Installation
8
7
46)
Although there are not specific limits on the installation site, it should
be as dry and dust-free as possible.
4.5
(0.177)
PCB terminal-equipped relays weigh approximately 140 g. Be sure
that the PCB is strong enough to support them. OMRON recom-
mends dual-side through-hole PCBs to reduce solder cracking from
heat stress.
M3.5
Allow suitable slack on leads when wiring, and do not subject the ter-
minals to excessive force. Maximum tightening torque is 10 kgf-cm
(0.72 ft-lbs).
General Purpose Relay G7J
747
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-
gation hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the non-
complying Product or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Product; provided that in no event shall
Seller be responsible for warranty, repair, indemnity or any other claims or
expenses regarding the Products unless Seller's analysis confirms that the
Products were properly handled, stored, installed and maintained and not sub-
ject to contamination, abuse, misuse or inappropriate modification. Return of
any Products by Buyer must be approved in writing by Seller before shipment.
Seller shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies, or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing
are not to be construed as an amendment or addition to the above warranty.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-
lars, Buyer shall make remittance to Seller at the then current exchange rate
most favorable to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol-
lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in
no event shall liability of Seller exceed the individual price of the Product on
which liability is asserted.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Product made to Buyer specifications infringed intellectual property rights
of another party.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15. Property; Confidentiality. The intellectual property embodied in the Products is
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstand-
ing any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials sup-
plied by Seller to Buyer relating to the Products are confidential and propri-
etary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Law. These Terms are governed by Illi-
nois law (without regard to conflict of law principles). Federal and state courts
in Illinois shall have exclusive jurisdiction for any dispute hereunder.
(d) Amendment. These Terms constitute the entire agreement between Buyer
and Seller relating to the Products, and no provision may be changed or
waived unless in writing signed by the parties. (e) Severability. If any provision
hereof is rendered ineffective or invalid, such provision shall not invalidate any
other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice.. (g) Definitions. As used
herein, "including" means "including without limitation".
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a
vide applicable third party certification documents identifying ratings and limita-
tions of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combi-
nation with the end product, machine, system, or other application or use.
guide for the user in determining suitability and does not constitute a warranty
It may represent the result of Seller's test conditions, and the users must corre
late it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be
ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii)Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
changed at any time based on improvements and other reasons. It is our prac
tice to change part numbers when published ratings or features are changed
or when significant construction changes are made. However, some specifica
tions of the Product may be changed without any notice. When in doubt, spe
cial part numbers may be assigned to fix or establish key specifications for you
application. Please consult with your Seller representative at any time to con
firm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the bes
of our knowledge as of the date of this publication, with the requirements of the
European Union's Directive on the Restriction of certain Hazardous Sub
stances ("RoHS"), although the requirements of RoHS do not take effect unti
July 2006. These requirements may be subject to change. Please consult ou
website for current information.
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
847-882-2288
Cat. No. JB301-E3-01
3/05
Specifications subject to change without notice
Printed in USA
相关型号:
G7J-2A2B-B-AC50
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount
OMRON
G7J-2A2B-B-DC100
Power/Signal Relay, 4PST, Momentary, 0.02A (Coil), 100VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
G7J-2A2B-B-DC48
Power/Signal Relay, 4PST, Momentary, 0.042A (Coil), 48VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
G7J-2A2B-B-W1-AC100/120
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount
OMRON
G7J-2A2B-B-W1-AC200/240
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount
OMRON
G7J-2A2B-B-W1-AC24
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount
OMRON
G7J-2A2B-B-W1-AC50
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Panel Mount
OMRON
G7J-2A2B-B-W1-DC100
Power/Signal Relay, 4PST, Momentary, 0.02A (Coil), 100VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
G7J-2A2B-B-W1-DC12
Power/Signal Relay, 4PST, Momentary, 0.167A (Coil), 12VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
G7J-2A2B-B-W1-DC24
Power/Signal Relay, 4PST, Momentary, 0.083A (Coil), 24VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
G7J-2A2B-B-W1-DC48
Power/Signal Relay, 4PST, Momentary, 0.042A (Coil), 48VDC (Coil), 2000mW (Coil), 25A (Contact), 125VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
©2020 ICPDF网 联系我们和版权申明