XS5P-T426-1 [OMRON]
Circular Connector;型号: | XS5P-T426-1 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Circular Connector 连接器 |
文件: | 总18页 (文件大小:4993K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Industrial Ethernet Cables
XS5/XS6
Cables and Connectors for
EtherCAT® and Other Indus-
trial Ethernet Networks
CAT6a Ethernet patch cables
• For in-cabinet use
• LSZH with standard RJ45 plugs
CAT5e Ethernet patch cables
• For out-of-cabinet use
• PUR with standard RJ45 plugs
• PVC with rugged RJ45 plugs
• PVC with M12 SmartClick plugs
• In addition to cables with sockets and robot cables,
shield strengthening cables joined.
■ Connection Examples
AADDRR
ADR
ADR
Control panel
Ideal for out-of-cabinet
Ideal for in-cabinet
XS6W-6LSZH
XS6W-5PUR
XS5
XS6
Standard Connectors
Rugged Connectors
Rugged Assembly Connectors
Standard Connectors
XS5
M12 Connectors (Waterproof)
1
XS5/XS6
Industrial Ethernet Cables
■ Features
For details, refer to page 4.
Cables with Standard RJ45 Connectors
• The lineup features LSZH cables* for in-panel wiring and PUR cables for wiring outside of panels.
• The Standard RJ45 Connectors reduce cable routing space. LSZH cables are AWG26 with an outer diameter of 6.3 mm. PUR Cables
are AWG26 with an outer diameter of 6.0 mm.
• Cable colors include blue, yellow, or green.
• LSZH cables are available in 12 lengths from 0.2 to 20 m and PUR cables are available in 10 lengths from 0.5 to 20 m.
• Single-shielded cables with individual aluminum tape on each wire pair to reduce EMC interference in industrial environments.
Note. PUR cables are double-shielded cables with overall braiding and individual aluminum tape on each wire pair.
* Low-smoke zero-halogen cables.
Shape of RJ45 Connector
For details, refer to page 7.
Cables with Rugged RJ45 Connectors
• Tough latches and RJ45 connectors with strong cable holding strength are used to enable connections outside of control panels.
• Quad AWG22 cable with PVC cover of 6.5 mm outer diameter.
• Double-shielded cables with overall braiding and individual foil shield to reduce EMC interference in industrial environments.
Shape of RJ45 Connector
PVC Cable with Double Shield
Tough latch
Overall braiding and individual foil shield
Assembly Connectors
You can easily assemble Ethernet cables onsite without crimping tools or other special tools.
Refer to page 14 for the assembly procedure.
● Cable Extension Length
Standard Connectors (RJ45 Connectors)
Rugged Connectors (RJ45 Connectors)
89 mm
61 mm
Minimum cable
bending radius:
25 mm
Minimum cable bending
radius: 40 mm
2
XS5/XS6
Industrial Ethernet Cables
For details, refer to page 7.
Cables with M12 Connectors (Waterproof)
• Resistance to harsh environments with IP67 protection.
• SmartClick Connectors that provide one-step (1/8th turn) connection are used (compatible with standard M12 screw connectors).
• A wide range of variations, such as cables with right-angle connectors and PCB connectors.
• Cables with sockets and robot cables were added to the series.
Shape of M12 Connector
PVC Cable with Double Shield
Overall braiding and individual foil shield
Shield structure
Cables with M12 Connectors
Shield Strengthening Cables specification
For details, refer to page 7.
• Cable specification with strengthened shield for higher noise resistance. Recommended for EtherCAT communications.
• In addition to a double shield structure, copper foil tape is added to the M12 connector to improve communication characteristics (see
below).
Shield Strengthening Cable
(Double shield structure + copper foil tape wrapping)
<Internal structure>
Noise resistance is strengthened by wrapping
copper foil tape around the part where the cable
in the M12 connector joins the shield plate.
Shield Effectiveness Data for Rugged RJ45 Connectors and M12 Connectors (Waterproof)
The following data is the results of OMRON testing. Shield effectiveness may vary for your environment and application conditions.
●Comparison of Shield Effectiveness with Product without a Double Shield
The following table shows the differences with a structure without a double shield. Higher numeric values show greater shield effec-
tiveness.
Frequency (MHz)
Shield structure
0.5
1
5
10
30
Product with single shield
53 dB
61 dB
49 dB
58 dB
35 dB
43 dB
25 dB
31 dB
17 dB
27 dB
Product with a double shield (XS5@-T, Category 5E)
• SmartClick is a registered trademark of OMRON Corporation.
• EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
• Other company names and product names in this document are the trademarks or registered rademarks of their respective companies.
3
XS5/XS6
Industrial Ethernet Cables
Cables with Standard RJ45 Connectors
■ Model Number Legend
Use this legend when determining the product specifications from the model number. Choose from the model numbers listed in Ordering
Information when ordering.
XS6W-@ @@@@ 8 SS @@@@CM-@
A
B
C D
E
F
ATransmission Characteristics
5: Category 5
6: Category 6A
BSheath Material
LSZH: LSZH
PUR: PUR
CNumber of Pins
8: 8 pins
DCable Attachment Direction
SS: Straight/Straight
ECable Length*
20: 0.2 m
30: 0.3 m
50: 0.5 m
100: 1 m
150: 1.5 m
200: 2 m
300: 3 m
500: 5 m
750: 7.5 m
1000: 10 m
1500: 15 m
2000: 20 m
FSheath Color
B: Blue
Y: Yellow
G: Green
* PUR cables are not available for 0.2-m and 0.3-m cables.
4
XS5/XS6
Industrial Ethernet Cables
■ Ordering Information
Cable sheath
material
Appearance
Type
Category
Cable color Cable length (m)
Model
0.2
0.3
0.5
1
XS6W-6LSZH8SS20CM-B
XS6W-6LSZH8SS30CM-B
XS6W-6LSZH8SS50CM-B
XS6W-6LSZH8SS100CM-B
XS6W-6LSZH8SS150CM-B
XS6W-6LSZH8SS200CM-B
XS6W-6LSZH8SS300CM-B
XS6W-6LSZH8SS500CM-B
XS6W-6LSZH8SS750CM-B
XS6W-6LSZH8SS1000CM-B
XS6W-6LSZH8SS1500CM-B
XS6W-6LSZH8SS2000CM-B
XS6W-6LSZH8SS20CM-Y
XS6W-6LSZH8SS30CM-Y
XS6W-6LSZH8SS50CM-Y
XS6W-6LSZH8SS100CM-Y
XS6W-6LSZH8SS150CM-Y
XS6W-6LSZH8SS200CM-Y
XS6W-6LSZH8SS300CM-Y
XS6W-6LSZH8SS500CM-Y
XS6W-6LSZH8SS750CM-Y
XS6W-6LSZH8SS1000CM-Y
XS6W-6LSZH8SS1500CM-Y
XS6W-6LSZH8SS2000CM-Y
XS6W-6LSZH8SS20CM-G
XS6W-6LSZH8SS30CM-G
XS6W-6LSZH8SS50CM-G
XS6W-6LSZH8SS100CM-G
XS6W-6LSZH8SS150CM-G
XS6W-6LSZH8SS200CM-G
XS6W-6LSZH8SS300CM-G
XS6W-6LSZH8SS500CM-G
XS6W-6LSZH8SS750CM-G
XS6W-6LSZH8SS1000CM-G
XS6W-6LSZH8SS1500CM-G
XS6W-6LSZH8SS2000CM-G
XS6W-5PUR8SS50CM-G
XS6W-5PUR8SS100CM-G
XS6W-5PUR8SS150CM-G
XS6W-5PUR8SS200CM-G
XS6W-5PUR8SS300CM-G
XS6W-5PUR8SS500CM-G
XS6W-5PUR8SS750CM-G
XS6W-5PUR8SS1000CM-G
XS6W-5PUR8SS1500CM-G
XS6W-5PUR8SS2000CM-G
1.5
2
Blue
3
5
7.5
10
15
20
0.2
0.3
0.5
1
1.5
2
Cat.6a
LSZH
Yellow
3
5
7.5
10
15
20
0.2
0.3
0.5
1
Cable with
Connectors on Both
Ends (RJ45/RJ45)
1.5
2
Green
3
5
7.5
10
15
20
0.5
1
1.5
2
3
Cat.5
PUR
Green
5
7.5
10
15
20
5
XS5/XS6
■ Specifications
Type
Industrial Ethernet Cables
Cable with Connectors on Both Ends
Cable with Connectors on Both Ends
(RJ45/RJ45)/LSZH
(RJ45/RJ45)/PUR
Item
Model
XS6W-6LSZH8SS@@@@CM-@
XS6W-5PUR8SS@@@@CM-G
Rated current
Withstand voltage
1 A (at 50°C)
1,000 VDC for 60 s (leakage current: 1 mA max.)
Ambient operating tem-
perature
−20 to 75°C
−20 to 75°C
−40 to 80°C
−40 to 80°C
−10 to 60°C
Ambient storage tempera-
ture
Ambient installation tem-
perature
0 to 50°C
Protective structure
IP20
■ Materials and Finish
● Connectors
Cable with Connectors on Both Ends
Cable with Connectors on Both Ends
Type
(RJ45/RJ45)/LSZH
XS6W-6LSZH8SS@@@@CM-@
PC resin (UL94V-0)/transparent
Copper alloy/nickel base, gold plated
Brass/nickel plated
(RJ45/RJ45)/PUR
Item
Model
XS6W-5PUR8SS@@@@CM-G
Connector housing
Contacts
Shield
Cover
(structured to prevent the PA/Black
tab from breaking)
Marking tube
PVC resin (UL94V-0)/transparent
● Cables
Cable with Connectors on Both Ends
Cable with Connectors on Both Ends
Type
(RJ45/RJ45)/LSZH
(RJ45/RJ45)/PUR
Item
Model
XS6W-6LSZH8SS@@@@CM-@
IEC 60332-1 /UL444
AWG26
XS6W-5PUR8SS@@@@CM-G
Compliant standard
IEC 60332-1
Number of cores
*1
Outer diameter
*2
6.3 mm
6.0 mm
Green
*2. Sheath.
Sheath color
Blue, yellow, or green
LSZH
*1. Outer diameter.
Sheath material
PUR
Shield structure
Single shield
Double shield
■ Dimensions
(Unit: mm)
● Cable with Connectors on Both Ends (RJ45/RJ45)
XS6W-6LSZH8SS@@@@CM-@
XS6W-5PUR8SS@@@@CM-G
Wiring
RJ45
RJ45
1
1
2
2
3
3
4
4
5
5
6
6
7
8
7
8
Shield
Shield
L (Cable length)
(16)
10.5
40.8
18
18
40.8
13.8
6.3 dia.
Label
Marking tube
Marking tube
6
XS5/XS6
Industrial Ethernet Cables
Cables with Rugged RJ45 Connectors and Cables with M12 Connectors
■ Model Number Legend
Use this legend when determining the product specifications from the model number. Choose from the model numbers listed in Ordering
Information when ordering.
●Cable with Connectors
● RJ45 Assembly Connectors
XS6G-T 4 2 1-1
A B C D E
XS5@-T 4 2 @-@M@-@@
A B C D E F
G
H
AConnector Shape
H: Cable with plug on one end
AType
T: Ethernet
W: Cable with connectors on both ends
BNumber of Pins
BType
4: 4 pins
T: Ethernet (mating part: M12 D coding)
CContact Plating Specification
2: Gold plating, 0.4 μm
CNumber of Pins
4: 4 pins
DCable Attachment Direction
DContact Plating Specification
2: Gold plating, 0.4 μm
1: Straight
EDegree of Protection
ECable Attachment Direction (M12 Connectors)
1: IP20
1: Straight
2: Right angle
● M12 Connectors for Panel Mounting
FCable Length
A: 0.3 m
B: 0.5 m
C: 1 m
XS5P-T 4 2 @-@
A B C D E
AType
D: 2 m
T: Ethernet (mating part: M12 D coding)
E: 3 m
G: 5 m
BNumber of Pins
J: 10 m
4: 4 pins
K: 15 m
CPlating Specification
2: Gold plating, 0.4 μm
GConnector Shape
0: M12 plug on one end
DMounting Method
6: Rear lockingt
1: Connectors on both ends: M12 socket/M12 plug
2: Connectors on both ends: M12 plug/M12 plug
C: Connectors on both ends: M12 plug/RJ45 plug
D: Connectors on both ends: RJ45 plug/RJ45 plug
E: Connectors on both ends: M12 socket/RJ45 plug
7: Front locking
ETerminal Shape
1: DIP terminalst
5: Cable with loose wires (0.5 m)
HCable Specification
K: Standard cable
KR: Robot cable
SS: Shield Strengthening cable
7
XS5/XS6
Industrial Ethernet Cables
■ Ordering Information
Appearance
Cable type
Type
Cable length (m)
Model
0.5
1
XS5H-T421-BM0-K
XS5H-T421-CM0-K
XS5H-T421-DM0-K
XS5H-T421-EM0-K
XS5H-T421-GM0-K
XS5H-T421-JM0-K
2
Cable with Plug on One End
(M12 Straight)
3
5
10
15
XS5H-T421-KM0-K
0.5
1
XS5W-T421-BM2-K
XS5W-T421-CM2-K
XS5W-T421-DM2-K
XS5W-T421-EM2-K
XS5W-T421-GM2-K
XS5W-T421-JM2-K
2
Cable with Plugs on Both Ends
(M12 Straight/M12 Straight)
3
5
10
15
XS5W-T421-KM2-K
0.3
0.5
1
XS5W-T421-AMC-K
XS5W-T421-BMC-K
XS5W-T421-CMC-K
XS5W-T421-DMC-K
XS5W-T421-EMC-K
XS5W-T421-GMC-K
XS5W-T421-JMC-K
XS5W-T421-KMC-K
XS5H-T422-BM0-K
XS5H-T422-CM0-K
XS5H-T422-DM0-K
XS5H-T422-EM0-K
XS5H-T422-GM0-K
XS5H-T422-JM0-K
2
Cable with Plugs on Both Ends
(M12 Straight/RJ45)
3
5
10
15
0.5
1
2
Cable with Plug on One End
(M12 Right-angle)
3
5
10
15
XS5H-T422-KM0-K
0.5
1
XS5W-T422-BM2-K
XS5W-T422-CM2-K
XS5W-T422-DM2-K
XS5W-T422-EM2-K
XS5W-T422-GM2-K
XS5W-T422-JM2-K
2
Cable with Plugs on Both Ends
(M12 Right-angle/M12 Right-angle)
3
Standard Cables
5
10
15
XS5W-T422-KM2-K
0.3
0.5
1
XS5W-T422-AMC-K
XS5W-T422-BMC-K
XS5W-T422-CMC-K
XS5W-T422-DMC-K
XS5W-T422-EMC-K
XS5W-T422-GMC-K
XS5W-T422-JMC-K
XS5W-T422-KMC-K
XS5W-T421-AMD-K
XS5W-T421-BMD-K
XS5W-T421-CMD-K
XS5W-T421-DMD-K
XS5W-T421-EMD-K
XS5W-T421-GMD-K
XS5W-T421-JMD-K
XS5W-T421-KMD-K
XS5W-T421-BM1-K
XS5W-T421-CM1-K
XS5W-T421-DM1-K
XS5W-T421-EM1-K
XS5W-T421-GM1-K
XS5W-T421-JM1-K
XS5W-T421-KM1-K
XS5W-T421-BME-K
XS5W-T421-CME-K
XS5W-T421-DME-K
XS5W-T421-EME-K
XS5W-T421-GME-K
XS5W-T421-JME-K
XS5W-T421-KME-K
2
Cable with Plugs on Both Ends
(M12 Right-angle/RJ45)
3
5
10
15
0.3
0.5
1
2
Cable with Plugs on Both Ends
(RJ45/RJ45)
3
5
10
15
0.5
1
2
Cable with Plug on One End and Socket on
Other End
3
(M12 Straight/M12 Straight)
5
10
15
0.5
1
2
Cable with Plug on One End and Socket on
Other End
3
(M12 Straight/RJ45)
5
10
15
8
XS5/XS6
Industrial Ethernet Cables
Appearance
Cable type
Type
Cable length (m)
Model
0.5
1
XS5W-T421-BM1-KR
XS5W-T421-CM1-KR
XS5W-T421-DM1-KR
XS5W-T421-EM1-KR
XS5W-T421-GM1-KR
XS5W-T421-JM1-KR
XS5W-T421-KM1-KR
XS5W-T421-BM2-KR
XS5W-T421-CM2-KR
XS5W-T421-DM2-KR
XS5W-T421-EM2-KR
XS5W-T421-GM2-KR
XS5W-T421-JM2-KR
XS5W-T421-KM2-KR
XS5W-T421-BMC-KR
XS5W-T421-CMC-KR
XS5W-T421-DMC-KR
XS5W-T421-EMC-KR
XS5W-T421-GMC-KR
XS5W-T421-JMC-KR
XS5W-T421-KMC-KR
XS5W-T421-BMD-KR
XS5W-T421-CMD-KR
XS5W-T421-DMD-KR
XS5W-T421-EMD-KR
XS5W-T421-GMD-KR
XS5W-T421-JMD-KR
XS5W-T421-KMD-KR
2
Cable with Plug on One End and Socket on
Other End
3
(M12 Straight/M12 Straight)
5
10
15
0.5
1
2
Cable with Plugs on Both Ends
(M12 Straight/M12 Straight)
3
5
10
15
0.5
1
Robot Cables
2
Cable with Plugs on Both Ends
(M12 Straight/RJ45)
3
5
10
15
0.5
1
2
Cable with Plugs on Both Ends
(RJ45/RJ45)
3
5
10
15
0.5
1
XS5W-T421-BM2-SS
XS5W-T421-CM2-SS
XS5W-T421-DM2-SS
XS5W-T421-EM2-SS
XS5W-T421-GM2-SS
XS5W-T421-JM2-SS
XS5W-T421-BMC-SS
XS5W-T421-CMC-SS
XS5W-T421-DMC-SS
XS5W-T421-EMC-SS
XS5W-T421-GMC-SS
XS5W-T421-JMC-SS
2
Cable with Plugs on Both Ends
(M12 Straight/M12 Straight)
3
5
10
0.5
1
Shield Strengthening
Cables
2
Cable with Plugs on Both Ends
(M12 Straight/RJ45)
3
5
10
RJ45 Assembly Connector
---
XS6G-T421-1
Rear locking
M12 Connector for Panel
Mounting
0.5
0.5
XS5P-T426-5
XS5P-T427-5
Standard Cables
Front locking
M12 Panel-mounting PCB Straight Terminals
---
XS5P-T426-1
9
XS5/XS6
Industrial Ethernet Cables
●Cable Bending Data for Robot Cables (XS5W-T421-@M@-KR)
The following data is the results of OMRON testing for cable bending test conditions. The number of bends may vary for your environ-
ment and application conditions.
Cableveyor Test
Number of bends: 20 million min.
90° Bending Test
Number of bends: 6 million min.
Travel distance
Cable secured to end
Cable secured to end
Cableveyor
Roller
Cable
Travel speed: Approx. 120 m/min
Travel distance: 1 m
Cableveyor radius: 75 mm
Weight
Bending angle: 90ꢀ
Speed: Approx. 30 bends/min
Roller radius: 60 mm
Weight: 500 g
10
XS5/XS6
Industrial Ethernet Cables
■ Specifications
Cable with
Cable with
Cable with
Plugs on Both End and
Ends
(M12/M12)
Plug on One
Cable with
Plugs on Both End and
Ends
(M12/RJ45)
Plug on One
Cable with
Plugs on Both RJ45 Assembly
M12 Panel-
Cable with
Type Plug on One
End (M12)
M12 Connec-
tor for Panel
Mounting
mountingPCB
Straight Ter-
minals
Socket on
Other End
(M12/M12)
Socket on
Other End
(M12/RJ45)
Ends
Connector
(RJ45/RJ45)
XS5W
XS5W
XS5W
XS5W
XS5H
XS5W
XS6G
-T421-1
XS5P
-T426-1
Item
Model
-T42
@
-
@
M2-K, -T42
@
-
@M1-K, -T42
@
-
@MC-K,
-T421-@
MD-K,
XS5P-T42@-5
-T42
@
-@
M0-K
-T421-@
ME-K
-KR
-KR
-KR
-KR
Rated current
Rated voltage
3 A
2.5 A
4 A
30 V
125 VDC
Contact resistance 40 m
Ω
max.
min.
Insulation resis-
1,000 M
Ω
500 M
Ω
min.
1,000 MΩ min.
tance
1,500 VAC for 60 s
(leakage current: 1 mA max.)
Withstand voltage 1,000 VAC for 60 s (leakage current: 1 mA max.)
Ambient operating
−
25 to 70
°C*
temperature
Ambient storage
temperature
−
25 to 70
°C
Protective struc-
ture
M12: IEC IP67, RJ45: IEC IP20
* Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it.
■ Materials and Finish
●Connectors
Model
M12
RJ45
Item
XS5H and XS5W
XS5P-T42
@-5
XS5P-T426-1
XS5W and XS6G
Contact blocks
PBT resin (UL94V-0)/light gray
PA resin (UL94V-0)/black
PA resin (UL94V-0)/black
Brass/nickel base, gold plated
Phosphor bronze/nickel base,
Contacts
Phosphor bronze/nickel base, gold plated (0.4
Zinc diecast/nickel plating
μm)
(0.4
μm)
gold plated (1.4
---
μm)
Anchors
Anchors (tabs)
SUS
---
TPE (Thermo Plastic
Elastomer) /black
Cover
---
Sealing resin
O-rings
---
Epoxy resin
---
Rubber
---
---
Phosphor bronze/nickel base,
tin plated (2.0
Grounding fixture
---
μm)
Anchor cover
Nuts
---
---
SUS
---
---
Brass/nickel plated
●Cables
Model
Standard Cables
Robot Cables
Shield Strengthening Cables
Item
Compliant standard
Category
UL CM
Category 5e
AWG22 (7/0.26):
Yellow · Orange · White · Blue
AWG22 (7/24/0.05):
Yellow · Orange · White · Blue
AWG22 (7/0.26):
Yellow · Orange · White · Blue
Core/color
*2. Sheath.
*1
Outer diameter
*2
6.5 dia.
Sheath color
Light blue
Black
*1. Outer diameter.
Sheath material
Shield structure
PVC
Double shield SF/UTP
Note. For the XS5H and XS5W, cables are available only with connectors attached.
11
XS5/XS6
Industrial Ethernet Cables
■ Dimensions
(Unit: mm)
● Cable with Plug on One End (M12 Straight)
XS5H-T421-@M0-K
Wiring
Terminal No.
Color
Yellow
White
Orange
Blue
1
2
3
4
L (cable length)
44.7
2
3
1
4
2
1
14.9 dia.
3
4
M12 × 1
(Plug)
● Cable with Plugs on Both End (M12 Straight/M12 Straight)
XS5W-T421-@M2-K
XS5W-T421-@M2-KR
Wiring
M12 straight
M12 straight
1
1
2
2
3
4
3
4
Shield
Shield
L (cable length)
44.7
44.7
2
3
1
4
4
3
2
4
3
2
1
1
2
14.9 dia.
14.9 dia.
3
4
1
M12 × 1
M12 × 1
(Plug)
(Plug)
● Cable with Plugs on Both Ends (M12 Straight/RJ45)
XS5W-T421-@MC-K
XS5W-T421-@MC-KR
Wiring
M12 straight
RJ45
1
1
3
2
6
2
3
4
Shield
Shield
L (cable length)
44.7
54.7
2
3
1
4
2
1
14.9 dia.
3
4
M12 × 1
(Plug)
RJ45
● Cable with Plug on One End and Socket on Other End (M12 Straight/M12 Straight)
XS5W-T421-@M1-K
XS5W-T421-@M1-KR
Wiring
M12 straight
M12 straight
1
1
2
2
3
4
3
4
Shield
Shield
L (cable length)
44.7
50.7
2
3
1
4
3
4
1
3
4
1
2
1
2
14.9 dia.
14.9 dia.
3
4
2
M12×1
M12 × 1
(Plug)
(Socket)
● Cable with Plug on One End and Socket on Other End (M12 Straight/RJ45)
XS5W-T421-@ME-K
Wiring
M12 straight
RJ45
1
1
2
3
3
4
2
6
Shield
Shield
L (cable length)
50.7
54.7
1
4
2
1
4
2
14.9 dia.
3
M12 × 1
(Socket)
RJ45
12
XS5/XS6
Industrial Ethernet Cables
Wiring
● Cable with Plug One End (M12 Right-angle)
XS5H-T422-@M0-K
Terminal No.
Color
Yellow
White
Orange
Blue
1
2
3
4
L (cable length)
22.5
32.3
14.9 dia.
M12 × 1
1
2
4
3
(Plug)
Wiring
● Cable with Plugs on Both Ends (M12 Right-angle/M12 Right-angle)
XS5W-T422-@M2-K
M12 right angle
M12 right angle
1
1
2
2
3
4
3
L (cable length)
4
22.5
22.5
Shield
Shield
32.3
32.3
14.9 dia.
14.9 dia.
M12 × 1
M12 × 1
1
2
4
3
3
2
4
1
(Plug)
(Plug)
●Cable with Plugs on Both Ends (M12 Right-angle/RJ45)
XS5W-T422-@MC-K
L (cable length)
22.5
54.7
32.3
RJ45
14.9 dia.
M12 × 1
Wiring
1
2
4
3
M12 right angle
RJ45
1
1
2
3
4
3
2
6
Shield
Shield
(Plug)
13
XS5/XS6
Industrial Ethernet Cables
Wiring
● Cable with Plugs on Both Ends (RJ45/RJ45)
XS5W-T421-@MD-K
XS5W-T421-@MD-KR
RJ45
RJ45
1
1
2
2
3
6
3
6
Shield
Shield
L (cable length)
54.7
54.7
RJ45
RJ45
● Cable with Plugs on Both Ends (M12 Straight/M12 Straight)
Shield Strengthening Cable
XS5W-T421-@M2-SS
Wiring
M12 straight
M12 straight
1
1
2
2
3
4
3
4
Shield
Shield
L (cable length)
44.7
44.7
14.9 dia.
14.9 dia.
M12 × 1
M12 × 1
● Cable with Plugs on Both Ends (M12 Straight/RJ45)
Shield Strengthening Cable
XS5W-T421-@MC-SS
Wiring
M12 straight
RJ45
1
1
2
3
3
4
2
6
Shield
Shield
L (cable length)
44.7
54.7
14.9 dia.
M12 × 1
RJ45
14
XS5/XS6
Industrial Ethernet Cables
●RJ45 Assembly Connector
XS6G-T421-1
52.6
11.8
8.1
11.3
Contact 6
Contact 3
Contact 1
Contact 2
Applicable wires
Sheath outer diameter: 6.1 to 6.9 mm
Core size: AWG22 to AWG24 (stranded wires)
AWG22 to AWG23 (solid wires)
Insulation outer diameter: 1.6 mm max.
●M12 Connector for Panel Mounting
XS5P-T42@-5
Wiring
Terminal No.
Color
Yellow
White
Orange
Blue
XS5P-T426-5 (Rear Locking)
1
2
3
4
M12 × 1
PG9
18
17
2.8
Orange
White
500
18
14.6 dia.
20
Yellow
Blue
(20)
3
10
2.5
Panel Cutout Dimension
11.9
(Socket)
22.1
15.3 +0.1
dia.
0
XS5P-T427-5 (Front Locking)
Panel thickness
t = 1 to 4
M12 × 1
2.8
17
18
PG9
500
Orange
White
Note 1: The panel cutout dimen-
sion is the same for
20
13.9 dia.
18
Front-locking and Rear-
locking Connectors.
Note 2: Rotational positioning is
not possible for connec-
tor rotation.
Blue
(20)
3
10
Yellow
2.5
(Socket)
10.5
22.1
● M12 Panel-mounting PCB Straight Terminals
XS5P-T426-1
Mounting Hole Dimensions Mounting Hole Dimensions
(D Cut Structure)
10.6+0.2
19.9
10.4
0
14
B
Pin No.
M12×1
2.5
5.3+0.1
0
15
C
C
A
A
B
(Socket)
2.5
1.2 0.04 dia. × 45°
1.2 0.04 dia. × 45°
0.5 min.
2 to 3
2 to 3
16.5 dia. 14.6 dia.
12.2 0.05 dia.
12.2 0.05 dia.
Cross-section Diagram C-C
Cross-section Diagram A-A
0.5 min.
3
Cross-section Diagram B-B
Panel Processing Dimensions
5
0.05 dia.
1°
45°
0.05
5
Four, 1.2+0.1 dia.
0
0.05
7.05
Three, 1.4 +0.1 dia.
0
0.05
4.5
1+0.1dia.
0
0.05
8.5
15
XS5/XS6
Industrial Ethernet Cables
■ Assembly Procedure
● RJ45 Assembly Connectors
XS6G-T421-1
● M12 Panel-mounting PCB Straight Terminals
XS5P-T426-1
1. Pass the cable through the cable
Confirming the Number of Parts
The following four parts are included in the package when it is
clamp and the connector housing
delivered.
24 mm
13 mm
2. Strip the cable sheath and ground
braiding to the correct lengths.
Panel-mounting Parts
PCB-mounting Part
1. Anchor
2. O-Ring
3. Nut
4. Connector
3. Follow the color codes and prepare
to insert the wires into the splice
piece.
4. Insert the wires into the splice piece
for the length of the splice piece.
Assembly Procedure
1. Mount the connector to the PCB.
2. Attach the anchor to the panel with the nut.
5. Place the splice piece into the RJ45
data module and engage it.
Mounting the Connector to the PCB
Mounting the Anchor to the Panel
Anchor
6. Place the data module and the
splice piece on the IDC assembly
housing.
PCB
Panel
Nut
*Tightening torque: 1 N·m
7. Press the data module and the IDC
assembly housing together and use
pliers or a similar device to make
the insulation displacement contact.
3. Attach the connector that you mounted to the PCB to the panel.
* Make sure that the connector and anchor are oriented correctly.
Attachment
8. Remove the data module from the
IDC assembly housing.
9. Place the upper screen plate on the
data module and press it over the
ground braiding of the cable.
5 mm
10. Place the lower screen plate on the
bottom of the data module, align it
with the upper screen place, and
latch it until you hear it click into
place.
Align the flat surface on the anchor with
the grounding fixture terminal.
4. Temporarily mount the O-ring to the top of the connector at the
mating surface.
Temporary Mounting
of the O-Ring
O-ring
11. Slide the housing that you placed
around the cable in step 1 up to the
data module and latch it until you
hear it click into place.
12. Tighten the cable clamp.
Pin Assignments
Pin Assignments for Fast Ethernet 10/100 Mbps
5. Mate the Connector Waterproof Cover (XS2Z-22, sold sepa-
rately) or the Partner Connector Plug (XS5H-T42@-@M0-K,
sold separately) and press the O-ring to the O-ring position
Wire color
Function/Signal
Pin No.
Industrial
Ethernet
EIA/TIA
568A
EIA/TIA
after mounting.
Mounting the O-Ring
568B
WH/OG
OG
Transmission Data+/TD+
Transmission Data-/TD−
Receiver Data/RD+
YE
OG
WH
BU
WH/GN
GN
1
2
3
6
O-Ring Position after Mounting
WH/OG
OG
WH
Receiver Data/RD−
GN
● Connector Waterproof Cover (Sold Separately)
XS2Z-22
* Tightening torque: 0.39 to 0.49 N·m
16
XS5/XS6
Industrial Ethernet Cables
■ Safety Precautions
● Handling Precautions
Precautions for Correct Use
• Do not pull on the Connectors or cables with excessive force.
Do not install the Connectors with a load placed directly on the
joint or at the point where the wires connect to the Connector.
The Connector may be damaged or the wires in the cable may
be disconnected.
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
●Connector Connection and Disconnection
• When connecting or disconnecting Connectors, be sure to
hold the Connectors.
• Lay the cable where it will not be stepped on to prevent the
wires in the cable from being disconnected and to protect the
Connectors from being damaged. If the cable must be placed
where it will be stepped on, install a protective cover.
• When bending cables, do not exceed the cable specifications.
• Do not hold the cable when disconnecting Connectors.
• When joining Connectors, be sure to insert the plug all the way
to the back of the socket before attempting to lock the Connec-
tors.
• Do not use tools of any sort to join the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
●Wiring
Lay the cables so that external force is not applied to the Con-
nectors. Otherwise, the degree of protection (IP67) may not be
achieved.
●Degree of Protection for M12/Smartclick Connectors
• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not use the Connectors underwater.
• Do not step on or place any objects on the Connectors. Doing
so may damage the Connectors.
17
OMRON Corporation
Kyoto, JAPAN
Industrial Automation Company
Authorized Distributor:
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69, 2132 JD Hoofddorp
The Netherlands
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (31)2356-81-300/Fax: (31)2356-81-388
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
© OMRON Corporation 2010-2017 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
CSM_9_4_1017
Cat. No. G019-E1-07
Printed in Japan
0317 (0710)
相关型号:
©2020 ICPDF网 联系我们和版权申明