LUWCRDP [OSRAM]
OSLON SSL 150;型号: | LUWCRDP |
厂家: | OSRAM GMBH |
描述: | OSLON SSL 150 |
文件: | 总24页 (文件大小:2395K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2017-12-05
OSLON SSL 150
Datasheet
Version 1.4
LUW CRDP (EQW)
This ultra-compact 1 W class LED provides a wide
radiation pattern allowing perfect interaction and
various designs including color mixing LED clusters.
Its low thermal resistance allows this device to be
highly efficient even at high driving currents.
Applications demanding long lifetimes are perfectly
addressed with this highly reliable LED:
Höchster Lichtstrom. Höchste Lichtausbeute. Als
Mitglied der jüngsten Generation der
OSLON-SSL-Familie erlaubt diese LED eine perfekte
Interaktion in einer Vielzahl von Designs –
einschließlich der Farbmischung in LED-Clustern. Der
geringe Wärmewiderstand sorgt selbst bei hohen
Strömen für höchste Lichtausbeute. Diese
zuverlässige LED eignet sich besonders für
Applikationen, die eine hohe Lebenserwartung
erfordern.
Features:
Besondere Merkmale:
•
Package: SMT ceramic package with silicone resin
and silicone lens
•
Gehäusetyp: SMT-Keramikgehäuse mit
Silikonverguss und -linse
•
•
Viewing angle at 50 % IV: 150°
Color: Cx = 0.37, Cy = 0.44 acc. to CIE 1931 (EQ
white)
•
•
Abstrahlwinkel bei 50 % IV: 150°
Farbe: Cx = 0.37, Cy = 0.44 acc. to CIE 1931 (EQ
white)
•
•
•
•
CRI: typ. 65
•
•
•
•
CRI: typ. 65
Luminous Flux: typ. 156 lm
Luminous efficacy: typ. 151 lm/W
Corrosion Robustness: Superior Corrosion
Robustness
Lichtstrom: typ. 156 lm
Lichtausbeute: typ. 151 lm/W
Korrosionsstabilität: Höchste
Korrosionsbeständigkeit
•
Lumen Maintenance: Test results according to
IESNA LM-80 available
•
Lichtstromerhaltung: Testergebnisse nach
IESNA LM-80 verfügbar
Applications
Anwendungen
•
•
•
•
Industrial lighting
•
•
•
•
Industriebeleuchtung
Light sources in brillant mix technology
Retrofits and fixtures
Technical illumination with maximum energy saving
Lichtquellen in Brillant-Mix-Technik
Retrofits
technische Beleuchtung bei maximaler
Energieersparnis
2017-12-05
1
Version 1.4
LUW CRDP (EQW)
Ordering Information
Bestellinformation
Type:
Typ:
Luminous Flux 1) page 23
Lichtstrom 1) Seite 23
IF = 350 mA
Ordering Code
Bestellnummer
ΦV [lm]
LUW CRDP-LSLU-MMMW-1
LUW CRDP-LTMP-MCML-1
LUW CRDP-LTMP-MMMW-1
140 ... 180
Q65111A3445
Q65111A4271
Q65111A4270
150 ... 194
150 ... 194
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will
be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LUW CRDP-LTMP-MCML-1
means that only one group LT, LU, MP will be shippable for any packing unit.
In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on
any one packing unit. LUW CRDP-LTMP-MCML-1 means that the device will be shipped within the specified limits.
In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped
on any packing unit. E. g. LUW CRDP-LTMP-MCML-1 means that only one forward voltage group L1,L2,M1,MX will be shippable.
Anm.:
Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen
(siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LUW CRDP-LTMP-MCML-1
bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen LT, LU, MP enhalten ist.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine
Farbortgruppe geliefert. Z.B. LUW CRDP-LTMP-MCML-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen
enthalten ist. LUW CRDP-LTMP-MCML-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird.
Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit
wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LUW CRDP-LTMP-MCML-1 bedeutet, dass nach
Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen
L1,L2,M1,MX enthalten (siehe Seite 5).
2017-12-05
2
Version 1.4
LUW CRDP (EQW)
Maximum Ratings
Grenzwerte
Parameter
Symbol
Symbol
Top
Values
Unit
Einheit
°C
Bezeichnung
Werte
Operating temperature range
Betriebstemperatur
-40 ... 120
Storage temperature range
Lagertemperatur
Tstg
Tj, abs
Tj
-40 ... 120
160
°C
°C
°C
mA
Junction temperature absolute *
Sperrschichttemperatur absolut *
Junction temperature
Sperrschichttemperatur
135
Forward current
Durchlassstrom
(TJ = 25 °C)
IF
100 ... 1000
Surge current
Stoßstrom
IFM
IR
2000
200
8
mA
mA
kV
Reverse current 2) page 23
Sperrstrom 2) Seite 23
ESD withstand voltage
ESD Festigkeit
(acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class
3B)
VESD
Note:
Anm:
* This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than
L70B50 after 1000 h.
* Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei dürfen keine Totalausfälle auftreten und der
Lichtstrom muß nach 1000 h über L70B50 liegen.
2017-12-05
3
Version 1.4
LUW CRDP (EQW)
Characteristics (TJ = 25 °C; IF = 350 mA)
Kennwerte
Parameter
Symbol
Symbol
Values
Werte
Unit
Bezeichnung
Einheit
Chromaticity coordinates acc. to CIE 1931 3) page 23 (typ.)
Cx
Cy
0.37
0.44
-
-
Farbkoordinaten nach CIE 1931 3) Seite 23
(typ.)
(typ.)
Viewing angle at 50 % IV
Abstrahlwinkel bei 50 % IV
2ϕ
150
°
Forward voltage
Durchlassspannung
(min.)
(typ.)
(max.)
VF
VF
VF
2.80
2.95
3.25
V
V
V
Reverse voltage
Sperrspannung
(IR = 20 mA)
(max.)
VR
1.2
V
Color rendering index
Farbwiedergabe Index
(typ.)
Ra
65
-
"Electrical" thermal resistance junction / solder point (typ.)
Rth JS el
6.0
K/W
"Elektrischer" Wärmewiderstand Sperrschicht /
Lötpad
(with efficiency ηe = 38 %)
Note:
Anm.:
Individual forward voltage groups see next page
Durchlassspannungsgruppen siehe nächste Seite
2017-12-05
4
Version 1.4
LUW CRDP (EQW)
Brightness Groups
Helligkeitsgruppen
Group
Luminous Flux 1) page 23 Luminous Flux 1) page 23 Luminous Intensity
5) page 23
Gruppe
Lichtstrom 1) Seite 23
Lichtstrom 1) Seite 23
Lichtstärke 5) Seite 23
(min.) ΦV [lm]
(max.) ΦV [lm]
(typ.) IV [cd]
LS
LT
140
150
164
180
150
164
180
194
33
36
40
43
LU
MP
Forward Voltage Groups
Durchlassspannungsgruppen
Group
Gruppe
L1
(min.) VF [V]
2.80
(max.) VF [V]
2.90
L2
2.90
3.00
M1
3.00
3.10
MX
3.10
3.25
2017-12-05
5
Version 1.4
LUW CRDP (EQW)
Chromaticity Coordinate Groups 3) page 23
Farbortgruppen 3) Seite 23
Cy
520
515
525
530
0.800
0.700
0.600
0.500
0.400
0.300
0.200
0.100
0.000
540
510
550
505
500
560
570
580
590
495
600
610
490
630
700
485
480
475
470
460
450
0.000
0.100
0.200
0.300
0.400
0.500
0.600
0.700
Cx
Coordinates in reference to CIE 1931 (cx cy)
Cy
0.520
MW
MV
0.500
0.480
0.460
0.440
0.420
0.400
0.380
0.360
MU
Brillant Mix - EQW
MT
MS
MR
MQ
MP
MN
MM
ML
MK
MJ
MI
MH
MG
MF
3000 K
3500 K
4000 K
ME
MD
MC
K
0
0
7
2
K
4500 K
0
0
0
3
K
0
5000 K
0
5
3
K
0
0
0
4
0.320
0.340
0.360
0.380
0.400
0.420
0.440
0.460
Cx
Coordinates in reference to CIE 1931 (cx cy)
2017-12-05
6
Version 1.4
LUW CRDP (EQW)
Color Chromaticity Groups 3) page 23
Farbortgruppen 3) Seite 23
Group
Gruppe
Cx
Cy
Group
Gruppe
Cx
Cy
Group
Gruppe
Cx
Cy
MC
MD
ME
MF
MG
MH
MI
0.3334
0.3368
0.3494
0.3526
0.3368
0.3404
0.3526
0.3560
0.3404
0.3440
0.3560
0.3594
0.3440
0.3468
0.3594
0.3620
0.3468
0.3496
0.3620
0.3647
0.3496
0.3525
0.3647
0.3674
0.3525
0.3556
0.3674
0.3703
0.3874
0.3942
0.3842
0.3906
0.3942
0.4012
0.3906
0.3973
0.4012
0.4085
0.3973
0.4041
0.4085
0.4140
0.4041
0.4093
0.4140
0.4196
0.4093
0.4146
0.4196
0.4255
0.4146
0.4201
0.4255
0.4315
0.4201
0.4258
MJ
0.3556
0.3585
0.3703
0.3731
0.3585
0.3618
0.3731
0.3762
0.3618
0.3651
0.3762
0.3792
0.3651
0.3679
0.3792
0.3819
0.3679
0.3708
0.3819
0.3847
0.3708
0.3739
0.3847
0.3876
0.3739
0.3772
0.3876
0.3906
0.4315
0.4374
0.4258
0.4314
0.4374
0.4439
0.4314
0.4376
0.4439
0.4504
0.4376
0.4437
0.4504
0.4561
0.4437
0.4490
0.4561
0.4619
0.4490
0.4546
0.4619
0.4681
0.4546
0.4604
0.4681
0.4746
0.4604
0.4666
MR
MS
MT
MU
MV
MW
0.3772
0.3806
0.3906
0.3939
0.3806
0.3842
0.3939
0.3972
0.3842
0.3880
0.3972
0.4008
0.3880
0.3920
0.4008
0.4046
0.3920
0.3962
0.4046
0.4086
0.3962
0.4007
0.4086
0.4128
0.4746
0.4815
0.4666
0.4730
0.4815
0.4887
0.4730
0.4798
0.4887
0.4963
0.4798
0.4870
0.4963
0.5043
0.4870
0.4946
0.5043
0.5128
0.4946
0.5027
0.5128
0.5219
0.5027
0.5112
MK
ML
MM
MN
MP
MQ
2017-12-05
7
Version 1.4
LUW CRDP (EQW)
Group Name on Label
Gruppenbezeichnung auf Etikett
Example: LT-MC-L1
Beispiel: LT-MC-L1
Brightness
Helligkeit
Chromaticity Coordinate
Farbort
Forward Voltage
Durchlassspannung
LT
MC
L1
Note:
Anm.:
No packing unit / tape ever contains more than one group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
2017-12-05
8
Version 1.4
LUW CRDP (EQW)
Relative Spectral Emission - V(λ) = Standard eye response curve 5) page 21
Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 5) Seite 21
Φrel = f (λ); TS = 25 °C; IF = 350 mA
OHL06128
1.0
Φrel
:
Φrel (white)
: V
λ
0.8
0.6
0.4
0.2
0.0
350
400
450
500
550
600
650
700
750
800
λ
(nm)
Radiation Characteristics 5) page 21
Abstrahlcharakteristik 5) Seite 21
Irel = f (ϕ); TS = 25 °C
OHL06001
Θ
0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
-10°
1.0
-20°
ϕ
Irel at
:
= 0°, 90°
-30°
Irel
-40°
0.8
0.6
0.4
0.2
0.0
-50°
-60°
-70°
-80°
-90°
-100°
2017-12-05
9
Version 1.4
LUW CRDP (EQW)
Forward Current 5) page 23 , 6) page 23
Relative Luminous Flux 5) page 23 , 6) page 23
Relativer Lichtstrom 5) Seite 23 , 6) Seite 23
5) Seite 23 , 6) Seite 23
Durchlassstrom
IF = f (VF); TJ = 25 °C
ΦV/ΦV(350 mA) = f(IF); TJ = 25 °C
OHL06012
OHL06048
ΦV
2.5
2.0
1.5
1.0
0.5
0.0
1000
I (mA)
ΦV (350 mA)
F
800
600
400
200
0
0
0
0
0
0
0
0
0
0
0
0
2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8
V (V)
1
2
4
6
8
0
1
I (mA)
F
F
Chromaticity Coordinate Shift 5) page 23
Farbortverschiebung 5) Seite 23
Cx, Cy = f(IF); TJ = 25 °C
OHL06098
0.03
∆
Cx
Cy
: ∆Cx
: ∆Cy
∆
0.02
0.01
0.00
∆
Cx
Cy
∆
-0.01
-0.02
-0.03
0
0
0
0
0
0
0
0
0
0
0
2
4
6
8
1
I (mA)
F
2017-12-05
10
Version 1.4
LUW CRDP (EQW)
Relative Forward Voltage 5) page 23
Relative Vorwärtsspannung 5) Seite 23
Relative Luminous Flux 5) page 23
Relativer Lichtstrom 5) Seite 23
ΔVF = VF - VF(25 °C) = f(Tj); IF = 350 mA
OHL06174
0.20
ΦV/ΦV(25 °C) = f(Tj); IF = 350 mA
OHL06075
1.2
ΦV
∆VF (V)
ΦV (25 °C)
0.15
0.10
1.0
0.8
0.6
0.4
0.2
0.0
0.05
0.00
-0.05
-0.10
-0.15
-0.20
-40 -20 0 20 40 60 80 100 120
-40 -20
0
20 40 60 80 100 120
T (°C)
Tj (°C)
j
Chromaticity Coordinate Shift 5) page 23
Farbortverschiebung 5) Seite 23
Cx, Cy = f(Tj); IF = 350 mA
OHL06112
0.03
∆
Cx
Cy
: ∆Cx
: ∆Cy
∆
0.02
0.01
0.00
-0.01
-0.02
-0.03
-40 -20
0
20 40 60 80 100 120
T (°C)
j
2017-12-05
11
Version 1.4
LUW CRDP (EQW)
Max. Permissible Forward Current
Max. zulässiger Durchlassstrom
IF = f (T)
OHL05423
I (mA)
F
1000
900
800
700
600
500
400
300
200
100
Donot use below100 mA
0
0
20
40
60
80
100 120
T (°C)
S
2017-12-05
12
Version 1.4
LUW CRDP (EQW)
Package Outline 7) page 23
Maßzeichnung 7) Seite 23
Approximate Weight:
Gewicht:
25 mg
25 mg
ESD information:
ESD Information:
LED is protected by ESD device which is
connected in parallel to LED-Chip.
Die LED enthält ein ESD-Bauteil, das parallel zum
Chip geschaltet ist.
Corrosion robustness:
Korrosionsfestigkeit:
Test conditions: 40 °C / 90 % rh / 15 ppm H2S /
336 h
= Stricter than IEC 60068-2-43 (H2S) [25°C / 75 %
rh / 10 ppm H2S / 21 days]
= Regarding relevant gas (H2S) stricter than EN
60068-2-60 (method 4) [25 °C / 75 % rh / 200 ppb
SO2, 200 ppb NO2,10 ppb Cl2 / 21 days]
Test Kondition: 40°C / 90 % rh / 15 ppm H2S / 336
h
= Besser als IEC 60068-2-43 (H2S) [25°C / 75 %
rh / 10 ppm H2S / 21 Tage]
= Bezogen auf das Gas (H2S) besser als EN
60068-2-60 (method 4) [25°C / 75 % rh / 200ppb
SO2, 200ppb NO2,10ppb Cl2 / 21 Tage]
2017-12-05
13
Version 1.4
LUW CRDP (EQW)
Recommended Solder Pad 7) page 23
Empfohlenes Lötpaddesign 7) Seite 23
Reflow soldering
Reflow-Löten
solder resist
solder stencil
foot print
Cu area
2017-12-05
14
Version 1.4
LUW CRDP (EQW)
Note:
For superior solder joint connectivity results we
recommend soldering under standard nitrogen
atmosphere. For further information please refer
to our Application Note “Handling and Processing
Details for Ceramic LEDs“.
Anm.:
Um eine verbesserte Lötstellenkontaktierung zu
erreichen, empfehlen wir, unter Standard-
Stickstoffatmosphäre zu löten. Weitere
Informationen finden Sie in der Applikationsschrift
„Handling and Processing Details for Ceramic
LEDs“.
2017-12-05
15
Version 1.4
LUW CRDP (EQW)
Reflow Soldering Profile
Reflow-Lötprofil
Product complies to MSL Level 2 acc. to JEDEC J-STD-020E
OHA04525
300
˚C
T
250
T
245 ˚C
p
240 ˚C
tP
tL
217 ˚C
200
150
tS
100
50
25 ˚C
0
0
50
100
150
200
250
s
300
t
OHA04612
Pb-Free (SnAgCu) Assembly
Profile Feature
Profil-Charakteristik
Symbol
Symbol
Unit
Einheit
Minimum
Recommendation
Maximum
Ramp-up rate to preheat*)
25 °C to 150 °C
2
3
K/s
Time tS
TSmin to TSmax
tS
60
100
2
120
3
s
Ramp-up rate to peak*)
K/s
TSmax to TP
TL
tL
Liquidus temperature
217
80
°C
s
Time above liquidus temperature
Peak temperature
100
TP
tP
245
20
260
30
°C
s
Time within 5 °C of the specified peak
temperature TP - 5 K
10
3
6
K/s
s
Ramp-down rate*
TP to 100 °C
480
Time
25 °C to TP
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
2017-12-05
16
Version 1.4
LUW CRDP (EQW)
Taping 7) page 23
Gurtung 7) Seite 23
2017-12-05
17
Version 1.4
LUW CRDP (EQW)
Tape and Reel
Gurtverpackung
12 mm tape with 600 pcs. on ∅ 180 mm reel
W1
D0
P0
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Leader: min0 4±± mm *
Trailer: min0 16± mm *
*) Dimensions acc0 to IEC 6±.86-3; EIA 481-D
OHAY0324
Tape dimensions [mm]
Gurtmaße [mm]
Tape dimensions in mm
W
E
F
P0
P1
P2
2 ± 0.05
D0
12 + 0.3 / - 0.1 4 ± 0.1
4 ± 0.1
or
8 ± 0.1
1.5 ± 0.1
1.75 ± 0.1
5.5 ± 0.05
Reel dimensions [mm]
Rollenmaße [mm]
Reel dimensions in mm
A
min
60
W1
W2max
18.4
180
12
12.4 + 2
2017-12-05
18
Version 1.4
LUW CRDP (EQW)
Barcode-Product-Label (BPL)
Barcode-Produkt-Etikett (BPL)
OSRAM Opto
BIN1: XX-XX-X-XXX-X
LX XXXX
Semiconductos
RoHS Compliant
(6P) BATCH N1234567890
ML Temp ST
XXX °C X
X
(1T) LOT NO: 1234567890
9DD/: 123
ack: RXX
MY XX
X_X123_134.1234 X
(X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-X-X-X
OHA04563
Dry Packing Process and Materials
Trockenverpackung und Materialien
Moisture-sensitive label or print
Barcode label
OSRAM
Humidity indicator
Barcode label
D o n o t e a t .
A v o i d m e t a l c o n t a c t .
D i s c a r d i f c i r c l e s o v e r r u n .
b a g o p e n i n g .
P l e a s e c h e c k t h e H I C i m m i d i a t e l y a f t e r
c h e c k d o t
C o m p a r a t o r
W E T
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 5 %
I f w e t ,
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 0 %
I f w e t ,
c h a n g e d e s i c c a n t
p a r t s s t i l l a d e q a t e l y d r y .
I f w e t ,
u
5 %
M I L - I - 8 8 3 5
H u m i d i t y I n d i c a t o r
OSRAM
Desiccant
OHA00539
Note:
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry
Pack”. Here you will also find the normative references like JEDEC.
Anm.:
Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte.
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung”
unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
2017-12-05
19
Version 1.4
LUW CRDP (EQW)
Transportation Packing and Materials
Kartonverpackung und Materialien
Barcode label
Barcode label
Bin1: P-1-20
Bin2: Q-1-20
Bin3:
Temp ST
220
240
260
C
R
C
DEMY
R18
ML
R
C RT
2
LSY T676
2a
3
Additional TEXT
R077
PACKVAR:
Multi T
P-1+Q-1
(G) GROUP:
0144
(9D) D/C:
210021998
2000
OSRAM Opto
Semiconductors
(Q)QTY:
123GH1234
(6P) BATCH NO:
5
2
4
1
0
0
1
(1T) LOT NO:
1
(X) PROD NO:
Bin1: P-1-20
Bin2: Q-1-20
Bin3:
Temp ST
220
240
260
C
R
C
DEMY
R18
ML
R
C RT
2
LSY T676
2a
3
Additional TEXT
R077
PACKVAR:
Multi TOP
P-1+Q-1
(G) GROUP:
0144
(9D) D/C:
210021998
2000
OSRAM Opto
Semiconductors
(Q)QTY:
123GH1234
(6P) BATCH NO:
5
2
4
1
0
0
1
(1T) LOT NO:
1
OSRAM
(X) PROD NO:
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm
Width
Breite
195 ± 5
Length
Länge
195 ± 5
Height
Höhe
30 ± 5
2017-12-05
20
Version 1.4
LUW CRDP (EQW)
Notes
Hinweise
The evaluation of eye safety occurs according to the
standard IEC 62471:2008 ("photobiological safety of
lamps and lamp systems"). Within the risk grouping
system of this CIE standard, the LED specified in this
data sheet fall into the class Moderate risk (exposure
time 0.25 s). Under real circumstances (for exposure
time, eye pupils, observation distance), it is assumed
that no endangerment to the eye exists from these
devices. As a matter of principle, however, it should
be mentioned that intense light sources have a high
secondary exposure potential due to their blinding
effect. As is also true when viewing other bright light
sources (e.g. spotlights), temporary reduction in
visual acuity and afterimages can occur, leading to
irritation, annoyance, visual impairment, and even
accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach
dem Standard IEC 62471:2008 ("photobiological
safety of lamps and lamp systems"). Im
Risikogruppensystem dieser CIE- Norm erfüllen die
in diesem Datenblatt angegebenen LEDs folgende
Gruppenanforderung - Moderate risk
(Expositionsdauer 0,25 s). Unter realen Umständen
(für Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen
Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass
intensive Lichtquellen durch ihre Blendwirkung ein
hohes sekundäres Gefahrenpotenzial besitzen.
Nach einem Blick in eine helle Lichtquelle (z.B.
Spotlights), kann ein temporär eingeschränktes
Sehvermögen oder auch Nachbilder zu Irritationen,
Belästigungen, Beeinträchtigungen oder sogar
Unfällen führen.
Subcomponents of this LED contain, among other
substances, goldplated and Ag-filled materials. In
spite of the improved corrosion stability of this LED, it
can be affected by environments that contain very
high concentrations of aggressive substances.
Therefore, we recommend avoiding aggressive
atmospheres during storage, production and use.
Einzelkomponenten dieser LED enthalten u.a.
goldbeschichtete und Ag-gefüllte Materialien. Trotz
der verbesserten Korrosionsstabilität dieser LED
können Einzelkomponenten durch sehr hohe
Konzentration aggressiver Substanzen angegriffen
werden. Aus diesem Grund wird empfohlen,
aggressive Umgebungen während der Lagerung,
Produktion und im Betrieb zu vermeiden.
This LED is designed for specific/recommended
applications only. Please consult OSRAM Opto
Semiconductors Sales Staff in advance for detailed
information on other non-recommended applications
(e.g. automotive)
Die LED ist ausschließlich für spezifisch empfohlene
Anwendungen konzipiert. Bitte kontaktieren Sie das
OSRAM Opto Semiconductors Vertriebspersonal für
detailierte Informationen über nicht empfohlene
Anwendungsbereiche (z.B. Automobilbereich). oder
besuchen Sie
OR
Please visit www.osram-os.com/appnotes.
Change management for this component is aligned
with the requirements of the lighting market.
www.osram-os.com/appnotes
Das Änderungsmanagement dieses Bauteils ist an
den Anforderungen des Lichtmarktes ausgerichtet.
2017-12-05
21
Version 1.4
LUW CRDP (EQW)
Disclaimer
Disclaimer
Language english will prevail in case of any
discrepancies or deviations between the two language
wordings.
Bei abweichenden Angaben im zweisprachigen
Wortlaut haben die Angaben in englischer Sprache
Vorrang.
Attention please!
Bitte beachten!
The information describes the type of component and
shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may
contain dangerous substances.
Lieferbedingungen und Änderungen im Design
vorbehalten. Aufgrund technischer Anforderungen
können die Bauteile Gefahrstoffe enthalten. Für weitere
Informationen zu gewünschten Bauteilen, wenden Sie
sich bitte an unseren Vertrieb. Falls Sie dieses
Datenblatt ausgedruckt oder heruntergeladen haben,
finden Sie die aktuellste Version im Internet.
Verpackung
For information on the types in question please contact
our Sales Organization.
If printed or downloaded, please find the latest version
in the Internet.
Benutzen
Sie
bitte
die
Ihnen
bekannten
Packing
Recyclingwege. Wenn diese nicht bekannt sein sollten,
wenden Sie sich bitte an das nächstgelegene
Vertriebsbüro. Wir nehmen das Verpackungsmaterial
zurück, falls dies vereinbart wurde und das Material
sortiert ist. Sie tragen die Transportkosten. Für
Please use the recycling operators known to you. We
can also help you – get in touch with your nearest sales
office.
By agreement we will take packing material back, if it is
sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which
we are not obliged to accept, we shall have to invoice
you for any costs incurred.
Verpackungsmaterial,
das
unsortiert
an uns
zurückgeschickt wird oder das wir nicht annehmen
müssen, stellen wir Ihnen die anfallenden Kosten in
Rechnung.
Components used in life-support devices or
systems must be expressly authorized for such
purpose!
Critical components* may only be used in life-support
devices** or systems with the express written approval
of OSRAM OS.
Bauteile, die in lebenserhaltenden Apparaten und
Systemen eingesetzt werden, müssen für diese
Zwecke ausdrücklich zugelassen sein!
Kritische Bauteile* dürfen in lebenserhaltenden
Apparaten und Systemen** nur dann eingesetzt
werden, wenn ein schriftliches Einverständnis von
OSRAM OS vorliegt.
*) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
**) Life support devices or systems are intended (a) to
be implanted in the human body, or (b) to support
and/or maintain and sustain human life. If they fail, it is
reasonable to assume that the health and the life of the
user may be endangered.
*) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden
Apparaten
oder
Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer
Fehlfunktion
dieses
lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
**) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper oder
(b) für die Lebenserhaltung bestimmt. Falls Sie
versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist.
2017-12-05
22
Version 1.4
LUW CRDP (EQW)
Glossary
Glossar
1)
1)
Brightness: Brightness values are measured during
Helligkeit: Helligkeitswerte werden während eines
Strompulses mit einer typischen Dauer von 10 ms,
mit einer Genauigkeit von ± 7% ermittelt.
a current pulse of typically 10 ms, with a tolerance of
+/- 7%.
2)
2)
3)
Reverse Operation: A minimum of 10 hours of
reverse operation is permisable in total.
Betrieb in Sperrrichtung: Eine Gesamtbetriebszeit
von wenigstens 10 Stunden in Sperrrichtung ist
gewährleistet.
3)
Chromaticity coordinate groups: Chromaticity
Farbortgruppen: Farbortgruppen werden mit einer
Stromeinprägedauer von 10 ms, mit einer
Genauigkeit von ±0.005 ermittelt.
coordinate groups are measured during a current
pulse duration of typically 10ms with a tolerance of
±0.005.
4)
4)
Typical Values: Due to the special conditions of the
Typische Werte: Wegen
der
besonderen
manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can
only reflect statistical figures. These do not
necessarily correspond to the actual parameters of
each single product, which could differ from the
typical data and calculated correlations or the typical
characteristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
Prozessbedingungen bei der Herstellung von LED
können typische oder abgeleitete technische
Parameter nur aufgrund statistischer Werte
wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden
diese typischen Werte ohne weitere Ankündigung
geändert.
5)
5)
6)
Characteristic curve: In the range where the line of
Kennlinien: Im gestrichelten Bereich der Kennlinien
muss mit erhöhten Abweichungen zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
the graph is broken, you must expect higher
differences between single LEDs within one packing
unit.
6)
Tolerance of Measure: Unless otherwise noted in
drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
Maßtoleranz: Wenn in der Zeichnung nicht anders
angegeben, gilt eine Toleranz von ±0,1. Maße
werden in mm angegeben.
2017-12-05
23
Version 1.4
LUW CRDP (EQW)
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
2017-12-05
24
相关型号:
©2020 ICPDF网 联系我们和版权申明