MN101CF96D [PANASONIC]
MN101CF96D;型号: | MN101CF96D |
厂家: | PANASONIC |
描述: | MN101CF96D |
文件: | 总4页 (文件大小:299K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MN101CF96D, MN101CF96F
Type
MN101CF96D
MN101CF96F
Internal ROM type
ROM (byte)
FLASH
64K
3K
96K
6K
RAM (byte)
Package (Lead-free)
LQFP064-P-1414 (Under planning)
[Standard]
0.2 µs (at 2.7 V to 3.6 V, 10 MHz)
0.5 µs (at 2.7 V to 3.6 V, 4 MHz)
62.5 µs (at 2.7 V to 3.6 V, 32 kHz)
[Double speed]
Minimum Instruction
Execution Time
0.1 µs (at 2.7 V to 3.6 V, 10 MHz)
Interrupts
RESET, Watchdog, External 0 to 5, Timer 0 to 8, Time base, Serial 0 reception, Serial 0 transmission, Serial 1 reception, Serial 1
transmission, Serial 2, Serial 3, Automatic transfer finish, A/D conversion finish, Key interrupts (8 lines)
Timer Counter
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output, real-time output control,
generation of remote control carrier)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event, serial clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave output, PWM output, event count, pulse width measurement, synchronous timer, serial clock output)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 2
Timer counter 0, 1, 2 can be cascade-connected.
Timer counter 3 : 8-bit × 1 (square-wave output, event count, serial clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 0, 1, 2, 3 can be cascade-connected.
Timer counter 4 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, real-time output control, serial clock output)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; 1/1 of external clock input frequency
Interrupt source ........... coincidence with compare register 4
Timer counter 5 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 5
Timer counter 4, 5 can be cascade-connected.
MAD00054CEM
MN101CF96D, MN101CF96F
Timer counter 6 : 8-bit freerun timer
Clock source................ 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192
of XI oscillation clock frequency
Interrupt source ........... coincidence with compare register 6
Timer counter 7 : 16-bit × 1
(square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width
measurement, input capture, real-time output control)
Clock source................ 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1,
1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ........... coincidence with compare register 7 (2 lines)
Timer counter 8 : 16-bit × 1
(square-wave output, PWM output (duty continuous variable), event count, pulse width measurement, input capture)
Clock source................ 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1,
1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ........... coincidence with compare register 8 (2 lines)
Time base timer (one-minute count setting)
Clock source................ 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency
Interrupt source ........... 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency
Watchdog timer
Interrupt source ........... 1/65536, 1/262144, 1/1048576 of system clock frequency
Serial interface
Serial 0 : synchronous type / UART (full-duplex) × 1
Clock source................ 1/2, 1/4 of system clock frequency; pulse output of timer counter 1, 2; 1/2, 1/4, 1/16, 1/64 of OSC
oscillation clock frequency
Serial 1 : synchronous type / UART (full-duplex) × 1
Clock source................ 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 3; 1/2, 1/4, 1/16, 1/64 of OSC
oscillation clock frequency
Serial 2 : synchronous type / multi-master I²C × 1
Clock source................ 1/2, 1/4 of system clock frequency; pulse output of timer counter 3, 4; 1/2, 1/4, 1/16, 1/32 of OSC
oscillation clock frequency
Serial 3 : synchronous type / single-master I²C × 1
Clock source................ 1/2, 1/4 of system clock frequency; pulse output of timer counter 4, 5; 1/2, 1/4, 1/16, 1/32 of OSC
oscillation clock frequency
DMA controller
Max. Transfer cycles : 255
Starting factor : various types of interrupt, software
Transfer mode : 1-byte transfer, word transfer, burst transfer
I/O Pins
I/O
51
Common use , Specified pull-up resistor available, Input/output selectable (bit unit)
A/D converter
10-bit × 7-ch. (with S/H)
Special Ports
Buzzer output, remote control carrier signal output, high-current drive port
Development tools
In-circuit Emulator
PX-ICE101C/D+PX-PRB101C96-LQFP064-P-1414
MAD00054CEM
Pin Assignment
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
P25, IRQ5, TM7A
P24, IRQ4
TM4, SDO6, P76
TM5, SDO7, P77
LED7, P87
P23, IRQ3
P22, IRQ2
LED6, P86
P21, IRQ1
SBO0A, LED5, P85
SBI0A, LED4, P84
SBT0A, LED3, P83
LED2, P82
P20, IRQ0
P32, TM3
P31, TM2B
MN101CF96D
MN101CF96F
P30, TM2A
LED1, P81
P15, SBT2, SBT0B
P14, SBI2, SBI0B
P13, SBO2, SBO0B
P12, SBT1A
P11, SBI1A
LED0, P80
VREF-
AN0, PA0
AN1, PA1
AN2, PA2
P10, SBO1A
P02, SBT3, BUZ
AN3, PA3
AN4, PA4
LQFP064-P-1414
MAD00054CEM
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd. Industrial Co., Ltd.
相关型号:
MN101CFA7D
Microcontroller, 8-Bit, FLASH, 10MHz, CMOS, PQFP48, 7 X 7 MM, LEAD FREE, PLASTIC, QFP-48
PANASONIC
MN101CP28DHT
Microcontroller, 8-Bit, OTPROM, 20MHz, CMOS, PQFP80, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-80
PANASONIC
MN101CP38C
Microcontroller, 8-Bit, OTPROM, 20MHz, CMOS, PQFP100, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-100
PANASONIC
©2020 ICPDF网 联系我们和版权申明