MN102H81G [PANASONIC]

MN102H81G;


型号：	MN102H81G
厂家：	PANASONIC
描述：	MN102H81G
文件：	总3页 (文件大小：98K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MN102H81G

128 K

Type

ROM (×8-bit)

RAM (×8-bit)

Package

4 K

*Lead-free

QFP084-P-1818E

Minimum Instruction

Execution Time

83 ns (at 3.135 V to 3.465 V, 12 MHz)

External (5 lines)

Interrupts

Internal (28 lines) : Timer × 11, A/D × 1, Undefined command × 1, RESET × 1, OSD × 2, Serial × 1,

I²C × 1, Caption × 2, Remote control × 1, Address coincidence × 4, HSYNC× 1, VSYNC× 1

8-bit timer × 10

Timer Counter

Serial Interface

Watchdog timer: 17-bit × 1

I²C × 1: for multimaster mode, bus line (output) has 2 systems

Sync serial / UART × 1

• Built-in sync separator × 1

Caption

• Common use

I/O Pins

I/O

10-bit × 8-ch. (with S/H)

8-bit × 6-ch.

A/D Inputs

PWM

Remote control reception

Special Ports

CRTC

3-layer display (graphics, characters, splits)

Remote control input discriminant circuit built-in,

Notes

build-in NTSC video signal processing circuit, built-in 3-line comb filter

MAE00017CEM

MN102H81G

Pin Assignment

P15, RMIN, /IRQ7

GOUT

ROUT

VIREF

VCOMP

VMOUT

AVDD

FBPIN

AVSS

*P16, SDA0

*P17, SCL0

P20, WDOUT

P21, STOP, VOUT0

P27, SBT0

P30, SBD0

P31, SBO0

*P32, SDA1

*P33, SCL1

P34, PWM0

P35, PWM1

P36, PWM2

DVDD

VOUT

AVDD

FSCOUT

FSCIN

FPCO

MN102H81G

DVSS

AVSS

P22, SYSCLK

*P23, TM5IO

*P26, TM8IO

P43, /RST

FVCOI

HOUT

HDOWN

EHTIN

BEAMIN

ABLIN

P44, /IRQ0

P45, /IRQ1

QFP084-P-1818E ^*Lead-free

*5 V dielectric Nch open drain output pin

Support Tool

PX-ICE102H81-QFP084-P-1818E

In-circuit Emulator

MAE00017CEM

Request for your special attention and precautions in using the technical information

and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of

the products or technical information described in this material and controlled under the "Foreign Exchange

and Foreign Trade Law" is to be exported or taken out of Japan.

(2) The technical information described in this material is limited to showing representative characteristics and

applied circuits examples of the products. It neither warrants non-infringement of intellectual property right

or any other rights owned by our company or a third party, nor grants any license.

(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical

information as described in this material.

(4) The products described in this material are intended to be used for standard applications or general elec-

tronic equipment (such as office equipment, communications equipment, measuring instruments and house-

hold appliances).

Consult our sales staff in advance for information on the following applications:

• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-

tion equipment, life support systems and safety devices) in which exceptional quality and reliability are

required, or if the failure or malfunction of the products may directly jeopardize life or harm the human

body.

• Any applications other than the standard applications intended.

(5) The products and product specifications described in this material are subject to change without notice for

modification and/or improvement. At the final stage of your design, purchasing, or use of the products,

therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-

tions satisfy your requirements.

(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-

ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not

be liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of

break down and failure mode, possible to occur to semiconductor products. Measures on the systems such

as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent

physical injury, fire, social damages, for example, by using the products.

(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life

and amount of time let standing of unsealed items) agreed upon when specification sheets are individually

exchanged.

(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written

permission of Matsushita Electric Industrial Co., Ltd.

2003 SEP

MN102H81G [PANASONIC]

相关型号：

MN102H85K

MN102H90M

MN102H950F

MN102HF55

MN102HF55G

MN102HF57K

MN102HF60

MN102HF60G

MN102HF60G(100LQFP)

MN102HF60G(100MLGA)

MN102HF60K

MN102HF60M