ON1108 [PANASONIC]
For contactless SW, object detection; 对于接触SW ,目标检测![ON1108](http://pdffile.icpdf.com/pdf1/p00023/img/icpdf/ON1108_112102_icpdf.jpg)
型号: | ON1108 |
厂家: | ![]() |
描述: | For contactless SW, object detection |
文件: | 总4页 (文件大小:71K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Transmissive Photosensors (Photo Interrupters)
CNZ1102, CNZ1108 (ON1102, ON1108)
Photo Interrupters
Unit : mm
CNZ1102
Mark for
indicating
For contactless SW, object detection
25.0±0.35
LED side
13.0±0.3
Device
Overview
3.0±0.2
center
CNZ1102 and CNZ1108 are a photocoupler in which a high
efficiency GaAs infrared light emitting diode is used as the light
emitting element, and a high sensitivity phototransistor is used as
the light detecting element. The two elements are arranged so as to
face each other, and objects passing between them are detected.
2-0.45±0.2
*9.6±0.3
19.0±0.2
Features
Position detection accuracy : 1.2 mm
2-ø3.2±0.2
2
1
3
4
Large output current
Fast response : tr, tf = 4 µs (typ.) (CNZ1102)
6 µs (typ.) (CNZ1108)
2
1
3
4
Small output current variation against change in temperature
Small package used for saving mounting space (CNZ1108)
Pin connection
(Note) * is dimension at the root of leads
Unit : mm
Absolute Maximum Ratings (Ta = 25˚C)
CNZ1108
Parameter
Symbol Ratings Unit
Mark for indicating
LED side
Reverse voltage (DC)
Forward current (DC)
Power dissipation
Collector current
VR
IF
3
50
75
20
30
5
V
mA
mW
mA
V
Input (Light
13.0±0.3
3.5±0.2
emitting diode)
3.0±0.2
A
*1
Device
center
PD
IC
Collector to emitter voltage VCEO
Output (Photo
transistor)
A'
4- 0.45±0.2
Emitter to collector voltage VECO
V
*2
Collector power dissipation PC
100
mW
*9.4±0.3
*2.54±0.2
SEC. A-A'
Operating ambient temperature
Storage temperature
*1 Input power derating ratio is 1.0 mW/˚C at Ta ≥ 25˚C.
*2 Output power derating ratio is 1.33 mW/˚C at Ta ≥ 25˚C.
Topr –25 to +85 ˚C
Tstg –30 to +100 ˚C
2
1
3
Temperature
2
3
4
4
1
Pin connection
(Note) * is dimension at the root of leads
Note) The part numbers in the parenthesis show conventional part number.
1
CNZ1102,CNZ1108
Transmissive Photosensors (Photo Interrupters)
Electrical Characteristics (Ta = 25˚C)
Parameter
Symbol
Conditions
VF IF = 50mA
IR VR = 3V
min
typ
max Unit
Forward voltage (DC)
Reverse current (DC)
Capacitance between terminals
Collector cutoff current
Collector to emitter capacitance
Collector current
1.2
1.5
10
V
µA
pF
nA
pF
mA
µs
µs
V
Input
characteristics
Ct VR = 0V, f = 1MHz
ICEO VCE = 10V
50
5
200
Output
characteristics
CC VCE = 10V, f = 1MHz
*2
IC
VCE = 10V, IF = 20mA
2
CNZ1102
Response time
VCC = 10V, IC = 5mA, RL = 100Ω
VCC = 10V, IC = 1mA, RL = 100Ω
4
6
tr , tf*1
Transfer
CNZ1108
characteristics
Collector to emitter CNZ1102 VCE(sat) IF = 50mA, IC = 1mA
0.4
0.4
Saturation voltage CNZ1108 VCE(sat) IF = 50mA, IC = 0.1mA
V
*1 Switching time measurement circuit
Sig.IN
VCC
td : Delay time
(Input pulse)
tr : Rise time (Time required for the collector current to increase
from 10% to 90% of its final value)
90%
10%
Sig.OUT
(Output pulse)
td
tf : Fall time (Time required for the collector current to decrease
from 90% to 10% of its initial value)
50Ω
RL
tr
tf
*2
IC classifications
Class
Q
R
S
IC (mA)
2.0 to 5.0
4.0 to 10.0
7.0 to 20.0
IF , IC — Ta
IF — VF
IC — IF
60
50
40
30
20
10
0
60
10 2
VCE = 10V
Ta = 25˚C
Ta = 25˚C
IF
50
40
30
20
10
0
10
1
IC
10 –1
10 –2
10 –1
– 25
0
20
40
60
80
100
0
0.4
0.8
1.2
1.6
2.0
2.4
1
10
10 2
Ambient temperature Ta (˚C )
Forward voltage VF (V)
Forward current IF (mA)
2
Transmissive Photosensors (Photo Interrupters)
CNZ1102,CNZ1108
VF — Ta
IC — VCE
IC — Ta
1.6
1.2
0.8
0.4
0
10 2
10
160
120
80
40
0
Ta = 25˚C
V
CE = 10V
IF = 20mA
IF = 30mA
20mA
IF = 50mA
10mA
10mA
1
10 –1
10 –2
10 –1
– 40 – 20
0
20
40
60
80 100
1
10
10 2
– 40 – 20
0
20
40
60
80 100
Ambient temperature Ta (˚C )
Collector to emitter voltage VCE (V)
Ambient temperature Ta (˚C )
ICEO — Ta
tr — IC
IC — d
10
1
10 3
10 2
100
80
60
40
20
0
VCC = 10V
Ta = 25˚C
Criterion
0
d
10 –1
10 –2
10 –3
10 –4
RL = 1kΩ
500Ω
100Ω(ON1108)
10
1
VCE = 24V
10V
100Ω(ON1102)
Sig.IN
VCC
Sig.
V1
V2
90%
10%
OUT
V1
50Ω
V2
td
RL
tr
1
tf
10 –1
– 40 – 20
0
20
40
60
80 100
10 –2
10 –1
10
0
1
2
3
4
5
6
Ambient temperature Ta (˚C )
Collector current IC (mA)
Distance d (mm)
3
Caution for Safety
Gallium arsenide material (GaAs) is used
in this product.
Therefore, do not burn, destroy, cut, crush, or chemi-
cally decompose the product, since gallium arsenide
material in powder or vapor form is harmful to human
health.
Observe the relevant laws and regulations when dispos-
ing of the products. Do not mix them with ordinary in-
dustrial waste or household refuse when disposing of
GaAs-containing products.
DANGER
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the
products or technologies described in this material and controlled under the "Foreign Exchange and Foreign
Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting
of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic
equipment (such as office equipment, communications equipment, measuring instruments and household ap-
pliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion
equipment, life support systems and safety devices) in which exceptional quality and reliability are required,
or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without notice for
reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the prod-
ucts, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifi-
cations satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the
range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for
any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended, so that
such equipment may not violate relevant laws or regulations because of the function of our products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life and after-
unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission from our
company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconduc-
tor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available product
types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information before
starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always
the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any
liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or
distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR
©2020 ICPDF网 联系我们和版权申明