PJSRV05W-4GW6 [PANJIT]
Low Capacitance TVS/ESD Protection;
| 型号： | PJSRV05W-4GW6 |
| 厂家： | 
PAN JIT INTERNATIONAL INC. |
| 描述： | Low Capacitance TVS/ESD Protection 电视 |
| 文件： | 总6页 (文件大小：305K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PPJSRV05W-4GW6
Low Capacitance TVS/ESD Protection
5 V
VRWM
Features
IEC61000-4-2(ESD): ±30kV Air, ±30kV Contact Compliance
IEC61000-4-4(EFT): 40A(5/50nS)
IEC61000-4-5(Lightning): 10A(8/20S)
Low leakage current, maximum 1A at rated voltage
Lead free in compliance with EU RoHS 2011/65/EU directive.
Green molding compound as per IEC61249 Std.
(Halogen Free)
Mechanical Data
Case: SOT23-6L, Plastic
Terminals: Solderable per MIL-STD-750, Method 2026
Approx. Weight: 0.0005 ounces, 0.014 grams
Marking: K6G
Applications
USB2.0 Data Line Protection
Video Graphics Cards
Monitors and Flat Panel Displays Notebook computers
Digital Video Interface(DVI)
10/100/1000 Ethernet
ATM Interfaces
Fig.70(Top View)
Control Signal Lines Protection
Maximum Ratings (TA=25oC unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
UNITS
kV
ESD IEC61000-4-2(Air)
±30
VESD
ESD IEC61000-4-2(Contact)
Operating Junction Temperature
Storage Temperature Range
±30
TJ
-55 to +125
-55 to +150
oC
oC
TSTG
May 23,2014-REV.00
Page 1
PPJSRV05W-4GW6
Electrical Characteristics (TA=25oC unless otherwise noted)
PARAMETER
Reverse Stand-Off Voltage (Note 1)
SYMBOL
VRWM
TEST CONDITION
MIN.
-
TYP.
-
MAX.
5
UNITS
V
-
IBR=1mA,
Reverse Breakdown Voltage
Reverse leakage current
VBR
6
-
-
-
8.5
1
V
PIN 5 to GND
VR=5V,
IR
A
PIN 5 to GND
IPP=1A, tP=8/20s,
any I/O pin to GND
IPP=10A, tP=8/20s,
any I/O pin to GND
IPP=4A, tP=100ns,
any I/O pin to GND
IPP=8A, tP=100ns,
any I/O pin to GND
tP=100ns
-
-
8
Clamping Voltage
VCL
V
-
-
12
-
-
12
Clamping Voltage TLP(Note 2)
Dynamic Resistance(Note 2)
VCL
V
-
-
17
-
-
RDYN
0.8
0Vdc Bias f=1MHz,
Between any I/O pins
to GND
-
-
1.6
0.8
2
1
Off State Junction Capacitance
CJ
pF
0Vdc Bias f=1MHz,
Between any I/O pins
NOTES :
1. A transient suppressor is selected according to the working peak reverse voltage(VRWM), Which should be equal to or
greater than the DC or continuous peak operation voltage level.
2. Testing using Transmission Line Pulse (TLP) conditions: Z0 = 50Ω , tP = 100 ns.
May 23,2014-REV.00
Page 2
PPJSRV05W-4GW6
TYPICAL CHARACTERISTIC CURVES
Fig.1 Typical Junction Capacitance
Fig2 Transmission Line Pulsing (TLP) Measurement
Fig.3 Typical Peak Clamping Voltage(8/20s)
Fig.4 8/20s Pulse Waveform
May 23,2014-REV.00
Page 3
PPJSRV05W-4GW6
MOUNTING PAD LAYOUT
0.024
(0.60)
0.037
(0.95)
0.037
(0.95)
ORDER INFORMATION
˙Packing information
T/R – 10K per 13" plastic Reel
T/R – 3K per 7" plastic Reel
May 23,2014-REV.00
Page 4
PPJSRV05W-4GW6
Part No_packing code_Version
PJSRV05W-4GW6_R1_00001
For example :
RB500V-40_R2_00001
˙Serial number
˙
˙Version code means HF
˙Packing size code means 13"
˙Packing type means T/R
Part No.
Packing Code XX
Version Code XXXXX
1st
2nd
HF or
1st
Code
2nd~5th
Code
Packing type
Packing size code
Code
Code RoHS
Tape and Ammunition
Box (T/B)
serial
number
A
R
B
T
S
L
F
N/A
7"
0
1
HF
0
1
serial
number
Tape and Reel (T/R)
Bulk Packing (B/P)
Tube Packing (T/P)
RoHS
13"
2
26mm
52mm
X
Y
U
D
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
PANASERT T/B
CATHODE UP (PBCU)
PANASERT T/B
CATHODE DOWN (PBCD)
FORMING
May 23,2014-REV.00
Page 5
PPJSRV05W-4GW6
Disclaimer
● Reproducing and modifying information of the document is prohibited without permission from Panjit
International Inc..
● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime
without notification. Please refer to our website for the latest document.
● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product
including damages incidentally and consequentially occurred.
● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for
particular purpose, non-infringement and merchantability.
● Applications shown on the herein document are examples of standard use and operation. Customers are
responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no
representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
● The products shown herein are not designed and authorized for equipments requiring high level of reliability or
relating to human life and for any applications concerning life-saving or life-sustaining, such as medical
instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these
products for use in such applications do so at their own risk and agree to fully indemnify Panjit International
Inc. for any damages resulting from such improper use or sale.
● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when
complaining.
May 23,2014-REV.00
Page 6
相关型号：
©2020 ICPDF网 联系我们和版权申明