PI6C10804WEX [PERICOM]
Low Skew Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.153 INCH, GREEN, SOIC-8;型号: | PI6C10804WEX |
厂家: | PERICOM SEMICONDUCTOR CORPORATION |
描述: | Low Skew Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.153 INCH, GREEN, SOIC-8 驱动 光电二极管 逻辑集成电路 |
文件: | 总7页 (文件大小:371K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
Features
Description
• High-speed, low-noise, non-inverting 1:4 buffer
The PI6C10804 is a 1.5V to 2.5V high-speed, low-noise
1:4 non-inverting clock buffer. The key goal in designing the
PI6C10804 is to target networking applications that require low-
• Maximum Frequency up to 180 MHz
• Low output skew < 70ps (1.8V, 2.5V), <100ps (1.5V)
• Low propagation delay < 3.0ns (1.8V, 2.5V), <3.5ns (1.5V)
• Optimized duty cycle
skew, low-jitter, and high-frequency clock distribution.
Providing output-to-output skew as low as 70ps, the PI6C10804
is an ideal clock distribution device for synchronous systems. De-
signing synchronous networking systems requires a tight level of
skew from a large number of outputs.
• 1.5V - 2.5V supply voltage
• 3.3V Tolerant input clock
• Packages (Pb-free & Green available):
−8-pin SOIC (W)
Block Diagram
Pin Configuration
OE
CLK0
8
7
6
5
1
2
3
4
BUF_IN
CLK0
OE
CLK1
V
DD
BUF_IN
GND
CLK1
CLK2
CLK3
CLK2
CLK3
Pin Description
Pin Name
Description
BUF_IN
CLK [0:3]
GND
Input
Outputs
Ground
Power
V
DD
OE
Output Enable
PS8822G
10/07/09
09-0056
1
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
2.5V Absolute Maximum Ratings (Above which the useful life may be impaired. For user guidelines only, not tested.)
Note:
Storage Temperature...........................................................–65°C to +150°C
Voltage ..........................................................................–0.5V to +3.6V
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the
device. This is a stress rating only and functional operation
of the device at these or any other conditions above those
indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect reliability.
V
DD
Output Voltage............................................................... –0.5V to V +0.5V
DD
Input Voltage ..........................................................................................3.6V
2.5V DC Characteristics (Over Operating Range: V = 2.5V ± 0.2V, T = -40° to 85°C)
DD
(1)
A
(2)
Parameters Description
Test Conditions
Min.
2.3
Typ.
Max.
2.7
Units
V
DD
V
IH
V
IL
Supply Voltage
2.5
V
Input HIGH Voltage
Input LOW Voltage
Logic HIGH level
Logic LOW level
1.7
3.6
V
-0.3
0.7
V
GND
= Max, V = V or
IN DD
DD
I
Input Current
I pin
15
μA
I
I
OH
I
OH
I
OH
I
OL
I
OL
I
OL
= -1mA
= -2mA
= -8mA
= 1mA
= 2mA
= 8mA
2.0
1.7
1.5
V
Output High Voltage
V
= Min., V = V or V
DD IN IH IL
OH
OL
V
V
0.4
0.7
0.7
V
Output LOW Voltage
V
= Min., V - V or V
DD IN IH IL
Notes:
1. For Max. or Min. conditions, use appropriate operating range values.
2. Typical values are at VDD = 2.5V, +25°C ambient and maximum loading.
2.5V AC Characteristics (Over Operating Range: V = 2.5V ± 0.2V, T = -40° to 85°C)
DD
A
(1)
Parameters
Description
Min.
Typ
1.5
Max.
250
1
Units
Test Conditions
F
Input Frequency
0
MHz
ns
IN
t /t
CLKn Rise/Fall Time
Propagation Delay BUF_IN to CLKn
20% to 80%
R F
(2)
t
t
t
1.0
2.0
ns
PLH, PHL
Output to Output Skew between any two
outputs of the same device @ same transition
(3)
70
SK(O)
Pulse Skew between opposite transitions
(3)
C = 5pF, 125 MHz
Outputs are measured
L
t
t
100
200
300
ps
%
SK(P)
(t
-t
) of the same output
PHL PLH
@ V /2
Part to Part Skew between two identical out-
DD
(3)
SK(T)
(4)
puts of different parts on the same board
Duty Cycle In @ 1ns edge rate
Duty Cycle Out
45
40
55
60
t
t
dc_in
dc_out
Notes:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. Skew measured at worse cast temperature (max. temp).
4. Identical conditions: loading, transitions, supply voltage, temperature, package type and speed grade.
PS8822G
10/07/09
2
09-0056
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
1.8V Absolute Maximum Ratings (Above which the useful life may be impaired. For user guidelines only, not tested.)
Note:
Storage Temperature...........................................................–65°C to +150°C
Voltage ..........................................................................–0.5V to +2.5V
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the
device. This is a stress rating only and functional operation
of the device at these or any other conditions above those
indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect reliability.
V
DD
Output Voltage............................................................... –0.5V to V +0.5V
DD
Input Voltage ..........................................................................................3.6V
1.8V DC Characteristics (Over Operating Range: V = 1.8V ± 0.15V, T = -40° to 85°C)
DD
(1)
A
(2)
Parameters Description
Test Conditions
Min.
Typ.
Max.
1.95
3.6
Units
V
DD
V
IH
V
IL
Supply Voltage
Input HIGH Voltage Logic HIGH level
1.65
1.8
0.65*V
-0.3
V
DD
Input LOW Voltage
Logic LOW level
0.35*V
DD
V
V
= Max,
DD
(3)
I
Input Current
I pin
15
μA
I
= V or GND
IN
DD
I
I
I
I
= -2mA
= -8mA
= 2mA
= -8mA
1.3
1.2
OH
OH
OL
OL
V
Output High Voltage
V
= Min., V = V or V
OH
OL
DD IN IH IL
V
0.45
0.45
V
Output LOW Voltage
V
DD
= Min., V - V or V
IN IH IL
Notes:
1. For Max. or Min. conditions, use appropriate operating V
and T values.
DD
A
2. Typical values are at V
= 1.8V, +25°C ambient and maximum loading.
DD
3. This parameter is determined by device characterization but is not production tested.
1.8V AC Characteristics (Over Operating Range: V = 1.8V ± 0.15V, T = -40° to 85°C)
DD
A
(1)
Parameters
Description
Min.
Typ
2.0
Max.
180
1
Units
Test Conditions
F
Input Frequency
0
MHz
IN
t /t
CLKn Rise/Fall Time
Propagation Delay BUF_IN to CLKn
20% to 80%
R F
ns
(2)
t
t
t
1.0
3.0
PLH, PHL
Output to Output Skew between any two
outputs of the same device @ same transition
(3)
70
SK(O)
Pulse Skew between opposite transitions
(3)
C = 5pF, 125 MHz
Outputs are measured
L
t
t
200
275
300
ps
%
SK(P)
(t
-t
) of the same output
PHL PLH
@ V /2
Part to Part Skew between two identical out-
DD
(3)
SK(T)
(4)
puts of different parts on the same board
Duty Cycle In @ 1ns edge rate
Duty Cycle Out
45
40
55
60
t
t
dc_in
dc_out
Notes:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. Skew measured at worse cast temperature (max. temp).
4. Identical conditions: loading, transitions, supply voltage, temperature, package type and speed grade.
PS8822G
10/07/09
3
09-0056
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
Switching Characteristics (V = 2.5V ± 0.2V or 1.8V ± 0.15V, T = 105°C)
DD
A
Parameters
Description
CLKn Rise/Fall Time
Note: 1. All other AC and DC characteristics are identical to the 1.8V and 2.5V sections.
Test Conditions
Min.
Typ.
Max.
Units
t ,t
R F
20% to 80%, C = 15pF, 125MHz
0.8
1.4
ns
L
1.5V Absolute Maximum Ratings (Above which the useful life may be impaired. For user guidelines only, not tested.)
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the
Storage Temperature...........................................................–65°C to +150°C
V
Voltage ..........................................................................–0.5V to +2.6V
DD
device. This is a stress rating only and functional operation
of the device at these or any other conditions above those
indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect reliability.
Output Voltage............................................................... –0.5V to V +0.5V
DD
Input Voltage ..........................................................................................3.6V
1.5V DC Characteristics (Over Operating Range: V = 1.5V ± 0.075V, T = -40° to 85°C)
DD
(1)
A
(2)
Parameters
Description
Test Conditions
Min.
Typ.
Max.
1.6
Units
V
DD
V
IH
V
IL
Supply Voltage
1.4
1.5
Input HIGH Voltage
Input LOW Voltage
Logic HIGH level
Logic LOW level
1.17
-0.3
3.6
V
0.63
V
V
= Max, V
or GND
=
IN
DD
I
I
Input Current
I pins
15
μA
DD
I
I
I
I
I
= -2mA
= -8mA
= 1mA
= 2mA
= 8mA
1.05
0.75
OH
OH
OL
OL
OL
V
= Min., V
=
DD
IN
V
Output High Voltage
OH
OL
V
or V
IH
IL
0.4
V
V
V
= Min., V
-
DD
IN
V
Output LOW Voltage
0.35
0.35
or V
IH
IL
Notes:
1. For Max. or Min. conditions, use appropriate operating range values.
2. Typical values are at VDD = 1.5V, +25°C ambient and maximum loading.
1.5V AC Characteristics (Over Operating Range: V = 1.5V ± 0.075V, T = -40° to 85°C)
DD
A
(1)
Parameters
Description
Test Conditions
Min.
Typ
Max.
Units
F
Input Frequency
0
200
1.5
3.0
MHz
IN
t /t
R
CLKn Rise/Fall Time
Propagation Delay BUF_IN to CLKn
20% to 80%
F
ns
(2)
t
t
t
1.0
1.5
PLH, PHL
Output to Output Skew between any two out-
puts of the same device @ same transition
(3)
100
300
SK(O)
C = 5pF, 125 MHz
L
ps
%
Part to Part Skew between two identical out-
puts of different parts on the same board
Outputs are measured
@ V /2
DD
(3)
t
SK(T)
(4)
t
t
Duty Cycle In @ 1ns edge rate
Duty Cycle Out
45
40
55
60
dc_in
dc_out
Notes:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. Skew measured at worse cast temperature (max. temp).
4. Identical conditions: loading, transitions, supply voltage, temperature, package type and speed grade.
PS8822G
10/07/09
4
09-0056
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
Power Supply Characteristics
Parameters Description
(1)
(2)
Test Conditions
Min.
Typ.
Max. Units
V
V
V
V
V
= 2.7V
= 1.95V
= 2.7V
= 1.95V
= 2.7V
10
μA
10
DD
DD
DD
DD
DD
Quiescent Power
Supply Current
I
I
V
= GND or V
IN DD
DDQ
20
Total Power Supply
Current
All Outputs Toggling,
C = 5pF, F = 125MHz
mA
15
DD_TOT
L
IN
(3)
Static Supply Current
per inputs @ High
Level
V
= V - 0.6V
200
INx
INx
DD
∆I
μA
CC
(3)
V
DD
= 1.95V
V
= V - 0.6V
200
DD
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics.
2. Typical values are at VDD = 1.8V or 2.5V, and +25°C ambient.
3.
Per TTL driven input (VIN = VDD - 0.6V); all other inputs at VDD or GND.
Power Supply Characteristics
Parameters Description
Quiescent Power
(1)
(2)
Test Conditions
Min.
Typ.
Max. Units
I
V
= 1.5V
= 1.5V
V
= GND or V
DD
10
15
μA
DDQ
DD
DD
IN
Supply Current
Total Power Supply
Current
All Outputs Toggling,
C = 5pF, F = 125MHz
I
V
mA
DD_TOT
L
IN
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics.
2. Typical values are at VDD = 1.2V or 1.5V, and +25°C ambient.
Capacitance (T = 25°C, f = 1 MHz)
A
(1)
Description
Test Conditions
Typ
2.0
Max.
Units
pF
Parameters
C
IN
Input Capacitance
Output Capacitance
V
V
= 0V
4
6
IN
C
OUT
= 0V
1.7
OUT
Note:
1.
This parameter is determined by device characterization but is not production tested.
Test Circuits for All Outputs
V
DD
33-Ohm
Pulse
Generator
f = 125MHz
D.U.T.
C
5pF
L
50Ω
Definitions:
CL = Load capacitance: includes jig and probe capacitance.
PS8822G
10/07/09
5
09-0056
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
Switching Waveforms
Pulse Skew – tSK(P)
Propagation Delay
VIH
VDD
Input
Input
VDD/2
VIL
VDD/2
0V
tPLH
tPHL
tPLH
tPHL
VOH
VOH
Output
Output
VDD/2
VOL
VDD/2
VOL
tR
tF
tsk(p) = | tPLH - tPHL |
Output Skew – t
Package Skew – t
SK(O)
SK(T)
VDD
VDD/2
0V
VDD
VDD/2
0V
Input
Input
tPLHx
tPHLx
tPLH1
tPHL1
VOH
VOH
Part #1
Output
CLKx
VDD/2
VOL
VDD/2
VOL
tSK(O)
tSK(O)
tSK(T)
tSK(T)
tPHL2
VOH
VOH
Part #2
Output
CLKy
VDD/2
VOL
VDD/2
VOL
tPLHy
tPHLy
tPLH2
tSK(O) = | tPLHy - tPLHx | or | tPHLy - tPHLx |
tSK(T) = | tPLH2 - tPLH1 | or | tPHL2 - tPHL1 |
PS8822G
10/07/09
6
09-0056
PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
Packaging Mechanical: 8-Pin SOIC (W)
DOCUMENT CONTROL NO.
PD - 1001
8
REVISION: F
DATE: 03/09/05
.149
.157
3.78
3.99
0.25
0.50
.0099
.0196
x 45˚
1
0.19
0.25
.0075
.0098
.189
.196
4.80
5.00
0-8˚
0.40 .016
1.27
.050
.2284
.2440
5.80
6.20
.016
.026
0.406
0.660
1.35
1.75
.053
.068
SEATING PLANE
REF
.050
BSC
0.10
0.25
.0040
.0098
1.27
.013
.020
0.330
0.508
Pericom Semiconductor Corporation
3545 N. 1st Street, San Jose, CA 95134
1-800-435-2335 • www.pericom.com
X.XX DENOTES DIMENSIONS
X.XX IN MILLIMETERS
Notes:
DESCRIPTION: 8-Pin, 150-Mil Wide, SOIC
PACKAGE CODE: W
1) Controlling dimensions in millimeters.
2) Ref: JEDEC MS-012D/AA
Note:
• For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php
Ordering Information(1,2,3)
Ordering Code
Package Code
Package Type
PI6C10804WE
W
Pb-free & Green, 8-pin 153-mil wide SOIC
Notes:
1. Thermal Characteristics can be found on the web at www.pericom.com/packaging/
2. E = Pb-free and Green
3. X suffix = Tape/Reel
Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com
PS8822G
10/07/09
7
09-0056
相关型号:
PI6C10806ALE
Low Skew Clock Driver, 6C Series, 6 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.173 INCH, GREEN, MO-153F/AB, TSSOP-16
PERICOM
PI6C10806ALEX
Low Skew Clock Driver, 6C Series, 6 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.173 INCH, GREEN, MO-153F/AB, TSSOP-16
PERICOM
PI6C10807HE
Low Skew Clock Driver, 6C Series, 10 True Output(s), 0 Inverted Output(s), PDSO20, 0.209 INCH, GREEN, MS-150B/AE, SSOP-20
PERICOM
PI6C10807LE
Low Skew Clock Driver, 6C Series, 10 True Output(s), 0 Inverted Output(s), PDSO20, 0.173 INCH, GREEN, MO-153F/AC, TSSOP-20
PERICOM
PI6C10807LEX
Low Skew Clock Driver, 6C Series, 10 True Output(s), 0 Inverted Output(s), PDSO20, 0.173 INCH, GREEN, MO-153F/AC, TSSOP-20
PERICOM
PI6C10810HE
Clock Driver, 6C Series, 10 True Output(s), 0 Inverted Output(s), PDSO20, 0.209 INCH, GREEN, MS-150B/AE, SSOP-20
DIODES
©2020 ICPDF网 联系我们和版权申明