SNSAS2150 [PERICOM]
3.3V PECL Low Jitter 150MHz SAS-2 XO; 3.3V PECL低抖动150MHz的SAS- 2 XO型号: | SNSAS2150 |
厂家: | PERICOM SEMICONDUCTOR CORPORATION |
描述: | 3.3V PECL Low Jitter 150MHz SAS-2 XO |
文件: | 总2页 (文件大小:492K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM
Application Specific Crystal Oscillator 7.0 x 5.0mm
3.3V PECL Low Jitter 150MHz SAS-2 XO
SNSAS2150
ASSP XO™ for Networking
7.0 x 5.0mm Ceramic SMD
Package:
Product Features
Recommended Land Pattern:
• Very low phase jitter - 0.5ps RMS
• Thicker crystal for improved reliability
• Pb-free & RoHS compliant
• Industrial temperature range
Product Description
The SN series 3.3V, 150MHz crystal clock
oscillator achieves superb jitter for Serial
Attached SCSI (SAS-1 & SAS-2) applications.
The output clock signal, generated internally
with a patented oscillator design, is
compatible with LVPECL logic levels. The
device, available on tape and reel, is
contained in a 7.0 x 5.0mm surface-mount
ceramic package.
Pin Functions:
Pin
Function
1
OE
2
NC
3
VEE
4
Q Output
Q Output
VCC
5
Applications
• SAS-2 Host Bus Adapter (HBA)
6
• SAS-2 Expander
• SAS-2 RAID System
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
Part Ordering Information:
SNSAS2150
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-435-0800 TW: +886-3-4518888
•
www.pericom.com
10-0020
All specifications are subject to change without notice. SNSAS2150 Rev C
04/09/10
1
3.3V PECL Low Jitter 150 MHz SAS-2 XO
SNSAS2150
TM
Application Specific Crystal Oscillator 7.0 x 5.0mm
Electrical Performance
Parameter
Min.
Typ.
150
3.30
45
Max.
Units
MHz
V
Notes
Output Frequency
Supply Voltage
2.97
3.63
70
Supply Current, Output Enabled
Supply Current, Output Disabled
Frequency Stability
mA
mA
ppm
°C
25
±50
See Note 1 below
Operating Temperature Range
-20
+70
V
0 to +85°C
VCC – 1.620
VCC – 1.555
Output Logic 0, VOL
Output Logic 1, VOH
V
-40 to 0°C
V
0 to +85°C
VCC – 1.025
VCC – 1.085
V
-40 to +0°C
Output Load
output requires termination
Measured 50% VDD
Measured 20/80% of waveform
50Ω to VCC – 2V
Duty Cycle
45
55
%
ns
Rise and Fall Time
0.3
0.2
35
0.6
Jitter, Phase RMS (1-σ)
Jitter, pk–pk
0.5
50
ps
ps
12 kHz to 20 MHz frequency band
100,000 random periods
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (5 year at 40°C average effective ambient temperature), shock and vibration.
2. For specifications othere than those listed, please contact sales.
Output Enable / Disable Function
Parameter
Input Voltage (pin 1), Output Enable
Input Voltage (pin 1), Output Disable (low power standby)
Internal Pullup Resistance
Min.
Typ.
Max.
Units
V
Notes
2.2
or open
0.8
V
Outputs disabled to Hi-Z
50
kΩ
ns
Output Disable Delay
200
10
Output Enable Delay
ms
Absolute Maximum Ratings
Parameter
Min.
Typ.
Max.
Units
Notes
Storage Temperature
-55
+125
°C
For the latest product information visit: http://www.pericom.com/products/timing/oscillators/SNSAS2150/
For test circuit go to: http://www.pericom.com/pdf/sre/tc_pecl.pdf
For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For typical phase noise go to: http://www.pericom.com/pdf/sre/pn_SNSAS2150.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050.pdf
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-435-0800 TW: +886-3-4518888
•
www.pericom.com
10-0020
All specifications are subject to change without notice. SNSAS2150 Rev C
04/09/10
2
相关型号:
©2020 ICPDF网 联系我们和版权申明