P1707AG-08TT [PULSECORE]
Notebook LCD Panel EMI Reduction IC; 笔记本电脑液晶面板降低EMI IC型号: | P1707AG-08TT |
厂家: | PulseCore Semiconductor |
描述: | Notebook LCD Panel EMI Reduction IC |
文件: | 总7页 (文件大小:173K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
February 2007
rev 1.3
P1707A
Notebook LCD Panel EMI Reduction IC
Features
the clock source, allowing system wide reduction of EMI of
down stream clock and data dependent signals. The
P1707A allows significant system cost savings by reducing
the number of circuit board layers ferrite beads, shielding
and other passive components that are traditionally
required to pass EMI regulations.
•
•
FCC approved method of EMI attenuation.
Generates a low EMI spread spectrum clock of the
input frequency.
•
•
Optimized for frequency range from 60MHz to
175MHz.
Internal loop filter minimizes external components
and board space.
The P1707A modulates the output of a single PLL in order
to “spread” the bandwidth of a synthesized clock, and more
importantly, decreases the peak amplitudes of its
harmonics. This results in significantly lower system EMI
compared to the typical narrow band signal produced by
oscillators and most frequency generators. Lowering EMI
by increasing a signal’s bandwidth is called ‘spread
spectrum clock generation’.
•
•
•
•
Four selectable spread ranges.
Low inherent Cycle-to-cycle jitter.
3.3V Operating Voltage.
Ultra-low power CMOS design.
•
•
•
14.85 mA @3.3V, 140MHz
16.69 mA @3.3V, 162MHz
17.78 mA @3.3V, 175MHz
•
•
•
•
Supports notebook VGA and other LCD timing
controller applications.
Pinout compatible to ICS MK1707 and Cypress
CY25561/CY25560.
SSON/SBM pin for Spread Spectrum On/Off and
Standby Mode controls.
Available in 8-pin SOIC and TSSOP Packages.
The P1707A uses the most efficient and optimized
modulation profile approved by the FCC and is
implemented in a proprietary all digital method.
Applications
The P1707A is targeted towards notebook LCD displays,
and other displays using an LVDS interface, PC peripheral
devices, and embedded systems.
Product Description
The P1707A is a versatile spread spectrum frequency
modulator designed specifically for input clock frequencies.
The P1707A reduces electromagnetic interference (EMI) at
VDD
SR0 SR1 SSON/SBM
Block Diagram
PLL
Modulation
CLKIN
Frequency
Divider
Output
Divider
Phase
Loop
Filter
VCO
Detector
Feedback
Divider
ModOUT
VSS
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
February 2007
P1707A
rev 1.2
Pin Configuration
1
2
3
4
CLKIN
VDD
8
NC
SR0
SR1
7
6
5
P1707A
VSS
ModOUT
SSON/SBM
Pin Description
Pin#
Pin Name
Type
Description
Connect to externally generated clock signal. To put the part into standby mode,
disable the input clock signal to this pin and pull SSON/SBM (pin 5) low. Refer
Standby Mode Selection Table.
1
CLKIN
I
2
3
4
5
VDD
VSS
P
P
O
I
Connect to +3.3V. (Place a decoupling 0.1µF close to pin and ground)
Ground Connection. Connect to system ground.
Spread spectrum clock output.
ModOUT
SSON/SBM
Spread Spectrum On/Off and standby mode control. Refer Standby Mode
Selection Table. This pin has an internal pull-up resistor.
Digital logic input used to select Spreading Range. Refer Spread Spectrum
Selection Table. This pin has an internal pull-up resistor.
6
7
8
SR1
SR0
NC
I
I
-
Digital logic input used to select Spreading Range. Refer Spread Spectrum
Selection Table. This pin has an internal pull-up resistor.
No connect.
Standby Mode Selection
Spread
CLKIN
SSON/SBM
ModOUT
PLL
Mode
Spectrum
Disabled
Disabled
Enabled
Enabled
0
1
0
1
N/A
Disabled
Disabled
Reference
Normal
Disabled
Free Running
Disabled
Standby
Free Running
Buffer out
Normal
N/A
Off
On
Normal
Spread Range Selection
SR1
SR0
Spreading Range
± 1.50%
Modulation Rate
(FIN/80) * 34.72 KHz
(FIN/80) * 34.72 KHz
(FIN/80) * 34.72 KHz
(FIN/80) * 34.72 KHz
0
0
1
1
0
1
0
1
± 2.50%
± 0.50%
± 1.00%
Notebook LCD Panel EMI Reduction IC
2 of 7
Notice: The information in this document is subject to change without notice.
February 2007
P1707A
rev 1.2
Absolute Maximum Ratings
Symbol
VDD, VIN
TSTG
TA
Ts
Parameter
Voltage on any pin with respect to Ground
Rating
-0.5 to +4.6
-65 to +125
-40 to +85
260
Unit
V
°C
°C
°C
°C
Storage temperature
Operating temperature
Max. Soldering Temperature (10 sec)
Junction Temperature
TJ
150
Static Discharge Voltage
TDV
2
KV
(As per JEDEC STD22- A114-B)
Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect
device reliability.
DC Electrical Characteristics
Symbol
VIL
Parameter
Min
VSS – 0.3
2.0
Typ
Max
0.8
Unit
V
Input low voltage
-
-
VIH
Input high voltage
Input low current
VDD+ 0.3
V
IIL
-
-
-35
µA
(pull-up resistors on inputs SR0, SR1 and SSON/SBM)
Input high current
IIH
-
-
-
3
3
-
35
µA
mA
mA
V
IXOL
IXOH
VOL
VOH
XOUT output low current ( VXOL @ 0.4V, VDD = 3.3V)
XOUT output high current ( VXOH @ 2.5V, VDD = 3.3V)
Output low voltage VDD= 3.3V, IOL = 20mA
-
-
-
-
0.4
-
Output high voltage VDD = 3.3V, IOH = 20mA
2.5
-
V
Dynamic supply current normal mode
3.3V and 10pF loading
ICC
8.46
12
17.78
mA
IDD
VDD
tON
Static supply current standby mode
-
2.7
-
0.6
3.3
-
3.7
-
mA
V
Operating voltage
Power up time (first locked clock cycle after power up)
Clock output impedance
0.18
20
mS
Ω
ZOUT
-
-
AC Electrical Characteristics
Symbol
Parameter
Min
Typ
-
-
0.9
0.8
-
Max
175
175
1.1
1.0
360
55
Unit
MHz
MHz
nS
nS
pS
fIN
fOUT
tLH*
tHL*
tJC
Input frequency
Output frequency
Output rise time ( Measured from 0.8V to 2.0V )
Output fall time ( Measured from 2.0V to 0.8V )
Jitter (Cycle to cycle)
60
60
0.7
0.6
-
tD
Output duty cycle
45
50
%
*tLH and tHL are measured into a capacitive load of 15pF
Notebook LCD Panel EMI Reduction IC
3 of 7
Notice: The information in this document is subject to change without notice.
February 2007
P1707A
rev 1.2
Package Information
Mechanical Package Outline 8-Pin SOIC Package
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
0.010
0.069
0.059
0.020
0.010
Min
0.10
1.35
1.25
0.31
0.18
Max
0.25
1.75
1.50
0.51
0.25
A1
A
0.004
0.053
0.049
0.012
0.007
A2
B
C
D
E
0.193 BSC
0.154 BSC
0.050 BSC
0.236 BSC
4.90 BSC
3.91 BSC
1.27 BSC
6.00 BSC
e
H
L
0.016
0°
0.050
8°
0.41
0°
1.27
8°
θ
Note: Controlling dimensions are millimeters
SOIC – 0.074 grams unit weight
Notebook LCD Panel EMI Reduction IC
4 of 7
Notice: The information in this document is subject to change without notice.
February 2007
rev 1.2
P1707A
Mechanical Package Outline 8-Pin TSSOP
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.043
1.10
0.002
0.033
0.008
0.004
0.114
0.169
0.006
0.037
0.012
0.008
0.122
0.177
0.05
0.85
0.19
0.09
2.90
4.30
0.15
0.95
0.30
0.20
3.10
4.50
c
D
E
e
0.026 BSC
0.252 BSC
0.65 BSC
6.40 BSC
H
L
0.020
0°
0.028
8°
0.50
0°
0.70
8°
θ
Note: Controlling dimensions are millimeters
TSSOP – 0.034 grams unit weight
Notebook LCD Panel EMI Reduction IC
5 of 7
Notice: The information in this document is subject to change without notice.
February 2007
rev 1.2
P1707A
Ordering Codes
Part Number
P1707AF-08ST
P1707AF-08SR
P1707AF-08TT
P1707AF-08TR
P1707AG-08ST
P1707AG-08SR
P1707AG-08TT
P1707AG-08TR
Marking
Package Type
Qty per reel
2500
Temperature
P1707AF 8-pin SOIC, Tube, Pb-Free
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
P1707AF 8-pin SOIC, Tape & Reel, Pb Free
P1707AF 8-pin TSSOP, Tube, Pb Free
P1707AF 8-pin TSSOP, Tape and Reel, Pb Free
P1707AG 8-pin SOIC, Tube, Green
2500
P1707AG 8-pin SOIC, Tape & Reel, Green
P1707AG 8-pin TSSOP, Tube, Green
P1707AG 8-pin TSSOP, Tape and Reel, Green
2500
2500
Device Ordering Information
P 1 7 0 7 A G - 0 8 X X
Package:
ST – SOIC, TUBE
SR - SOIC, T/R
TT – TSSOP, TUBE
TR - TSSOP, T/R
PIN COUNT
F = LEAD FREE AND RoHS COMPLIANT PART
DEVICE NUMBER
Flow:
P = Commercial Temperature Range (0°C to 70°C)
I = Industrial Temperature Range (-40°C to +85°C)
A = Automotive Temperature Range (-40°C to +125°C)
Licensed under U.S Patent Nos 5,488,627 and 5,631,921
Notebook LCD Panel EMI Reduction IC
6 of 7
Notice: The information in this document is subject to change without notice.
February 2007
rev 1.2
P1707A
Copyright © PulseCore Semiconductor
All Rights Reserved
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200
Campbell, CA 95008
Part Number: P1707A
Document Version: v1.3
Tel: 408-879-9077
Fax: 408-879-9018
www.pulsecoresemi.com
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003
© Copyright 2007 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or
registered trademarks of PulseCore Semiconductor. All other brand and product names may be the trademarks of their
respective companies. PulseCore reserves the right to make changes to this document and its products at any time without
notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein
represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the right to change or correct
this data at any time, without notice. If the product described herein is under development, significant changes to these
specifications are possible. The information in this product data sheet is intended to be general descriptive information for
potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product
described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products
including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual
property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from
PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale.
The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights,
trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products
for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result
in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the
manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use.
Notebook LCD Panel EMI Reduction IC
7 of 7
Notice: The information in this document is subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明