QPA9154 [QORVO]
2.3 â 3.8 GHz 100 Differential Output Gain Block;型号: | QPA9154 |
厂家: | Qorvo |
描述: | 2.3 â 3.8 GHz 100 Differential Output Gain Block |
文件: | 总15页 (文件大小:1584K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPA9154
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
®
Product Overview
The QPA9154 is a 50Ω single-ended input to 100Ω
differential output, wideband gain block. It is well suited as
the 5G m-MIMO BTS Rx path final gain stage, to directly
interface with the ADC of the transceiver, eliminating the
need for a discrete balun.
12-pin, 2ꢀxꢀ2ꢀmm SMT Package
This amplifier delivers exceptional performance with 19ꢁdB
of small signal gain and 35 dBm output 3rd order intercept
(OIP3). The amplifier has excellent gain flatness of 0.5 dB
over any 400 MHz bandwidth and a CMRR of 35 dB. The
amplifier features a shut-down function through VPD pin
control.
Key Features
• 2.3ꢁ–ꢁ3.8 GHz Operational Frequency
• 100 Ohm Differential Output
• 50 Ohm Single-Ended Input
• 19 dB Gain at 2.6 GHz
The QPA9154 is optimized over 2.3-3.8 GHz band and is
housed in a compact 2 x 2 mm SMT package.
• +34 dBm OIP3
• +18.5 dBm P1dB
• Small 2ꢁxꢁ2ꢁmm SMT Package
Functional Block Diagram
Applications
• 5G m-MIMO
• Mobile Infrastructure
• General Purpose Wireless
• TDD / FDD System
Ordering Information
Part No.
QPA9154TR7
Description
2500 pcs on 7” reel (standard)
QPA9154EVB-01
Differential Output Evaluation Board
Top View
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
1 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
-65 to +150°C
22 dBm
Parameter
Device Voltage (VDD
TCASE
Min
+3.3
−40
Typ
Max Units
Storage Temperature
RF Input Power, CW, 50ꢁΩ, T=25ꢁ°C
)
+5
+5.25
+105
+190
V
°C
°C
Device Voltage (VDD
)
7 V
Tj for >106 hours MTTF
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Electrical Specifications
Parameter
Conditionsꢀ(1)
Min
Typ
Max
Units
MHz
MHz
dB
Operational Frequency Range
Test Frequency
Small Signal Gain
Gain Flatness
2300
3800
2600
19
16.5
20.5
Any 400 MHz BW
0.5
35
dB
CMRR
dB
Input Return Loss
Output Return Loss
Output P1dB
13
dB
17
dB
100 Ω differential
+16
+29
+19
+34
100
1.5
70
dBm
dBm
ohm
dB
Output IP3
Poutꢁ0 dBm/tone combined, ∆fꢁ=ꢁ1ꢁMHz
Differential Output Impedance
Noise Figure
Device Current, ON
Device Current, OFF
VPD, Logic Low
VPD = 0.63 V
VPD = 1.17 V
110
mA
mA
V
4
0
0.63
VDD
VPD, Logic High
Switching Time
Thermal Resistance, θjc
Notes:
1.17
V
50% VPD to 10/90% RF
Junction to case
100
50
nsec
°C/W
1. Test conditions unless otherwise noted: VDDꢁ+5.0ꢁV, VPD +0.63 V, Tempꢁ+25ꢁ°C, 50ꢁΩ system. Differential output conversion with ideal balun
Logic Table
Parameter, VPD
High
Low
Device State
OFF
ON
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
2 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
2300 to 3800MHz Differential Evaluation Board - QPA9154EVB-01
Bill of Materials
Reference Des.
Value
Description
Manuf.
Qorvo
Part Number
-
-
-
Printed Circuit Board
U1
C5
C3
C4
R1
L1 (1)
Differential Output Rx Gain Block
CAP, 10 µF, 20%, 25V, Tantalum, 6032
Qorvo
QPA9154
10 µF
Cal-Chip
Various
TCMIE106CT
1000 pF CAP, 1000 pF, 10%, 50V, X7R, 0402
0.1 µF
0 Ω
CAP, 0.1 µF, 10%, 50V, X5R, 0402
RES, 0 Ω, 1/10W, 0402
Various
Various
3.9 nH
-
IND, 3.9 nH, Thin Film, 0402
Conn, SMA F STRT .062”
Various
J1, J2, J3
Notes:
Cinch Connectivity
142-0701-851
1. For optimum performance replace L1 with 6.8 nH inductor for 2.3GHz to 2.7GHz band, or 2.0 nH for 3.3GHz to 3.8GHz band.
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
3 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
2300 to 3800MHz Evaluation Board with Output Balun
Bill of Materials
Reference Des.
Value
Description
Manuf.
Qorvo
Part Number
-
-
Printed Circuit Board
U1
B1
C5
C3
C4
R1
L1 (1)
-
-
Differential Output Rx Gain Block
BALUN, 3.1GHZ-5GHZ, 50/100, 0404
CAP, 10 µF, 20%, 25V, Tantalum, 6032
Qorvo
QPA9154
BD3150N50100AHF
TCMIE106CT
Anaren
10 µF
Cal-Chip
Various
1000 pF CAP, 1000 pF, 10%, 50V, X7R, 0402
0.1 µF
0 Ω
CAP, 0.1 µF, 10%, 50V, X5R, 0402
RES, 0 Ω, 1/10W, 0402
Various
Various
3.9 nH
-
IND, 3.9 nH, Thin Film, 0402
Conn, SMA F STRT .062”
Various
J1, J2, J3
Notes:
Cinch Connectivity
142-0701-851
1. For optimum performance replace L1 with 6.8 nH inductor for 2.3GHz to 2.7GHz band, or 2.0 nH for 3.3GHz to 3.8GHz band.
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
4 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Typical Performance – QPA9154EVB-01
Parameter
Frequency
Gain
Conditions (1)
Typical Value
Units
MHz
dB
2300
18.6
12.5
7.5
2600
19.1
14.1
12.9
18.4
35.0
2700
19.1
13.8
16.2
18.2
36.3
3200
19.8
12.7
13.1
18.1
34.7
3600
20.0
16.7
8.1
3800
19.1
20.2
7.2
Input Return Loss
dB
Output Return Loss 100 Ω differential
dB
Output P1dB
18.7
36.1
17.3
32.7
16.9
31.3
dBm
dBm
mA
Output IP3
Device Current
Notes:
Pout 0 dBm/tone combined, f 1 MHz
VDD
70
1. Test Conditions unless otherwise noted: VDD ꢁ+5.0ꢁV, VPD +0.63 V, Temp.+25ꢀ°C. L1 3.9 nH. Differential output conversion with ideal balun
Performance Plots – QPA9154EVB-01
Test conditions unless otherwise noted: VDD = +5.0ꢁV, IDD = 70 mA, VPD = +0.63 V, 50ꢁΩ system
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
5 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Performance Plots – QPA9154EVB-01 (Continue)
Test conditions unless otherwise noted: VDD = +5.0ꢁV, IDD = 70 mA, VPD = +0.63 V, 50ꢁΩ system
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
6 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Typical Performance – EVB with L1 6.8 nH for 2.3-2.7 GHz
Parameter
Frequency
Conditions (1)
Typical Value
Units
MHz
dB
2300
19.3
14.1
9.6
2600
19.9
13.0
17.6
18.9
34.9
70
2700
20.0
12.3
18.3
18.9
35.8
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
dB
100 Ω differential
dB
18.9
35.5
dBm
dBm
mA
Pout 0 dBm/tone combined, f 1 MHz
VDD
Device Current
Notes:
1. Test Conditions unless otherwise noted: VDD ꢁ+5.0ꢁV, VPD +0.63 V, Temp. +25ꢀ°C. L1 = 6.8nH. Differential output conversion with ideal balun
Performance Plots – EVB with L1 6.8 nH for 2.3-2.7 GHz
Test conditions unless otherwise noted: VDD = +5.0ꢁV, IDD = 70 mA, VPD = +0.63 V, 50ꢁΩ system
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
7 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Performance Plots – EVB with L1 6.8 nH for 2.3-2.7 GHz (Continue)
Test conditions unless otherwise noted: VDD = +5.0ꢁV, IDD = 70 mA, VPD = +0.63 V, 50ꢁΩ system
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
8 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Typical Performance – EVB with L1 2.0 nH for 3.3-3.8 GHz
Parameter
Frequency
Conditions (1)
Typical Value
Units
MHz
dB
3200
20.5
15.7
27.2
18.5
34.9
3500
20.9
16.6
12.9
19.1
36.1
70
3800
20.9
19.7
7.8
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
dB
100 Ω differential
dB
18.6
35.4
dBm
dBm
mA
Pout 0 dBm/tone combined, f 1 MHz
VDD
Device Current
Notes:
1. Test Conditions unless otherwise noted: VDD +5.0ꢁV, VPD +0.63 V, Temp. +25ꢀ°C, L1 2.0 nH. Differential output conversion with ideal balun
Performance Plots – EVB with L1 2.0 nH for 3.3-3.8 GHz
Test conditions unless otherwise noted: VDD = +5.0ꢁV, IDD = 70 mA, VPD = +0.63 V, 50ꢁΩ system
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
9 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Performance Plots – EVB with L1 2.0 nH for 3.3-3.8 GHz (Continue)
Test conditions unless otherwise noted: VDD = +5.0ꢁV, IDD = 70 mA, VPD = +0.63 V, 50ꢁΩ system
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
10 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Pad Configuration and Description
Top View
Pad No.
Label
Description
No electrical connection internally. It may be left floating or connected to ground. Land pads should
be provided for PCB mounting integrity.
1, 3, 4, 5, 7, 10, 12 NC
2
RFIN
RF input. Internally matched to 50Ohm.
6
VPD
Power down control input, Turn down amplifier bias.
8
RFOUT-
RFOUT+
VDD
Differential output –. Requires external DC blocking capacitor if DC is present on this pin.
Differential output +. Requires external DC blocking capacitor if DC is present on this pin.
DC Power input, supply voltage for amplifier.
9
11
RF/DC ground. Use recommended via hole pattern to minimize inductance and thermal resistance.
See PCB Mounting Pattern for suggested footprint.
Backside Paddle
GND
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
11 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Package Marking and Dimensions
Marking: Part Number – 9154
Trace Code –ꢁto be assigned by sub-contractor
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. The terminal #1 identifier and terminal numbering conform to SPE-000677.
3. Contact plating: ENEPIG
Recommended PCB Layout Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm
(#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.01”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
12 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Tape and Reel Information – Carrier and Cover Tape Dimensions
Feature
Measure
Symbol
Size (in)
0.087
0.087
0.037
0.157
0.079
0.217
0.362
0.472
Size (mm)
2.20
Length
A0
B0
K0
P1
P2
F
Width
2.20
Cavity
Depth
0.95
Pitch
4.00
Cavity to Perforation - Length Direction
2.00
Centerline Distance
Cavity to Perforation - Width Direction
5.50
Cover Tape
Carrier Tape
Width
Width
C
9.20
W
12.00
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
13 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Tape and Reel Information – Reel Dimensions
Standard T/R size = 2,500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
6.969
0.717
0.504
2.283
0.512
0.079
0.787
Size (mm)
177.0
18.2
Diameter
A
W2
W1
N
Flange
Thickness
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
12.8
58.0
C
13.0
Hub
B
2.0
D
20.0
Tape and Reel Information – Tape Length and Label Placement
Notes:
1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481-1-A.
2. Labels are placed on the flange opposite the sprockets in the carrier tape.
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
14 of 15
www.qorvo.com
QPA9154
®
2.3 – 3.8 GHz 100Ω Differential Output Gain Block
Handling Precautions
Parameter
Rating
Standard
ESDꢁ–ꢁHuman Body Model (HBM)
ESDꢁ–ꢁCharged Device Model (CDM)
MSLꢁ–ꢁMoisture Sensitivity Level
Class 1C ESDAꢀ/ꢀJEDEC JS-001-2017
Caution!
ESD-Sensitive Device
Class C3 JEDEC JESD22-C101F
Level 3
IPC/JEDEC J-STD-020E
Solderability
Compatible with both lead-free (260°C max. reflow temperature) and tin/lead (245°C max. reflow temperature) soldering processes.
Solder profiles available upon request.
Contact plating: ENEPIG (Ni 0.40 ± 0.10 μm, Pd 0.145 ± 0.035 μm, Au 0.095 ± 0.025 μm)
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2019 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet, Rev. E, October 30, 2019 | Subject to change without notice
15 of 15
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明