RACT25-500 [RECOM]
25 Watt TRIAC Dimmable Single Output;型号: | RACT25-500 |
厂家: | RECOM INTERNATIONAL POWER |
描述: | 25 Watt TRIAC Dimmable Single Output 三端双向交流开关 |
文件: | 总5页 (文件大小:389K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Triac –dimmable with leading or trailing
edge dimmers
• Class II with SELV output (no earth required)
Features
TRIAC Dimmable
LED
AC/DC Converter
• Extra-large screw terminals and integrated
cable clamps for easy installation
• Power factor corrected >0.95
• Dimming range 1..100%
• Compatible with a wide range of dimmers
Driver
RACT25
A
R
Description
25 Watt
TRIAC
Dimmable
The RACT25-xxx series are low cost, triac-dimmable, constant current 25W LED drivers available with
either 500mA, 700mA or 1.05A full-range outputs. The drivers are Class II (double insulated) meaning
no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers.
The RACT25 is suitable for indoor locations up to 50°C ambient temperature and is certified for building
into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting. It is CE
marked (LVD + EMC + RoHS) and has IEC61347-1/IEC61347-2-13 CB report certification.
3
w
a
t
a
Single Output
Selection Guide
Part
Input
Output
Output
Efficiency
Output
Number
Voltage Range Voltage Range
Current min. @rated load Power
[VAC]
[VDC]
25-50
18-36
12-24
[mA]
500
[%]
85
85
84
[W]
25
25
25
RACT25-500
RACT25-700
RACT25-1050
198-264
198-264
198-264
700
1050
All LED Drivers may not be used without a load. They must be switched on the primary side only.
Noncompliance may damage the LED or reduce its lifetime.
M M
Model Numbering
RACT25-____
Output Current
IEC/EN61347 Certified
Output Power
IEC/EN61347-2-13 Certified
EN61547 Certified
EN62493 Certifed
EN55015 Compliant
CB Report
Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified)
BASIC CHARACTERISTICS
Parameter
Input Voltage Range
Input Current
Condition
Min.
198VAC
Typ.
230VAC
Max.
264VAC
160mA
5A
Inrush Current
full load
No Load Power Consumption
Input Frequency Range
Power Factor
1W
50Hz
0.95
60Hz
full load
continued on next page
www.recom-power.com
REV.: 0/2017
L-1
RACT25
AC/DC Converter
Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified)
Series
Parameter
THD
Condition
full load
Min.
Typ.
Max.
20%
Start-up Time
500ms
RACT25-500
RACT25-700, 1050
RACT25-500
RACT25-700
RACT25-1050
77kHz
65kHz
Internal Operating Frequency
170mA
260mA
440mA
Output Ripple Current (1)
Notes:
Note1: Measured at 20MHz BW by using a 12” twisted pair-wie terminated with a 0.1µF and 47µF capacitor parallel across output.
REGULATIONS
Parameter
Condition
Value
Output Accuracy
Load Regulation
Line Regulation
5% typ.
5% max.
5% max.
PROTECTION
Parameter
Condition
Value
fusible resistor
Input Fuse
Short Circuit Protection (SCP)
Latch OFF, auto recovery after fault condition is removed
RACT25-500
RACT25-700
RACT25-1050
58VDC max.
Latch OFF, auto recovery
45VDC max.
Over Voltage Protection (OVP)
after fault condition is removed
32VDC max.
Over Load Protection (OLP)
Over Temperature Protection (OTP)
Isolation Voltage
Latch OFF, auto recovery after fault condition is removed
110°C
Latch OFF, auto recovery after fault condition is removed
I/P to O/P
tested for 1 minute
3.75kVAC
5mA max.
Leakage Current
Maximum loading of automatic circuit breakers*
* @ 230VAC, 1Ohm, 90° phase angle and max. load
Circuit Breaker
Circuit Breaker Current
Typ
B
10A
24
16A
38
20A
46
25A
58
C
38
62
74
92
ENVIRONMENTAL
Parameter
Operating Temperature Range
Max. Case Temperature
Operating Humidity
IP Rating
Condition
Value
-20°C to +50°C
+80°C max.
5-85% RH
without derating @ natural convection 0.1m/s (see graph)
at tc point
non-condensing
IP20
Pollution Degree
PD2
Design Lifetime
+25°C ambient
>30 x 10³ hours
continued on next page
REV.: 0/2017
L-2
www.recom-power.com
RACT25
DC/DC Converter
Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified)
Series
Derating Graph
(@ Chamber and natural convection 0.1m/s)
100
80
60
40
20
0
-20 -10
0
10
20 30
40
50
Ambient Temperature [°C]
SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Lamp Controlgear General Requirments for Safety (CB Scheme)
Lamp Controlgear Particular Requirements (CB Scheme)
Lamp Controlgear General Requirments for Safety (LVD)
Lamp Controlgear Particular Requirements (LVD)
RoHS2+
Report Number
Standard
IEC61347-1:2007, 2nd Edition
IEC61347-2-13: 2014, 2nd Edition
EN61347-1:2007, 2nd Edition
325797
EN61347-2-13: 2014, 2nd Edition
RoHS 2011/65/EU + AM2015/863
EMC Compliance
Condition
Standard / Criterion
Limits and methods of measurement of radio disturbance characteristics of electrical
lighting and similar equipment
EN55015: 2013 +A1 2015
Limits for harmonic current emissions
IEC61000-3-2: 2014, Class C
IEC61000-3-3:2013
IEC61547:2009
Limitation of voltage fluctuations/flicker in low-voltage systems
Equipment for general Lighting Purpose EMC Immunity Requirements
Assessment of lighting equipment related to human exposure to electromagnetic fields
EN62493:2015
8kV Air Discharge,
4kV Contact Discharge
ESD Electrostatic discharge immunity test
IEC61000-4-2, Criteria A
IEC61000-4-3, Criteria A
Radiated, radio-frequency, electromagnetic field immunity test
Fast Transient and Burst Immunity
3V/m
L-N= 1kV; DC Output= 0.5kV
L-N= 0.5kV
IEC61000-4-4, Criteria A
IEC61000-4-5, Criteria A
IEC61000-4-6, Criteria A
IEC61000-4-11, Criteria B
IEC61000-4-11, Criteria B
Surge Immunity
Immunity to conducted disturbances, induced by radio-frequency fields
3V r.m.s.
>95% reduction
30%
Voltage Dips and Interruptions
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter
Type
Value
Case
PCB
Plastic (UL94V-2)
FR4 (UL94V-0)
Material
Package Dimension (LxWxH)
Package Weight
120.0 x 45.0 x 28.0mm
100g typ.
continued on next page
www.recom-power.com
REV.: 0/2017
L-3
RACT25
AC/DC Converter
Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified)
Series
Dimensions Drawing (mm)
120.0
wire stripping length: 6-7mm
recommended tightening torque: 0.25Nm
tc= case temperature measuring point
FC= fixing centers
+
ꢁ
Tolerance: xx.x=
1.0mm
ꢀ
xx.xx= 0.5mm
Connection via Screw Terminal
Function
Solid Wire
Stranded Wire (3) AWG
VAC in (N) 0.75-2.5mm²
VAC in (L) 0.75-2.5mm²
0.75-2.5mm²
0.75-2.5mm²
0.5-2.5mm²
0.5-2.5mm²
20-14
20-14
21-14
21-14
FC 13.3
LED+
LED-
0.5-2.5mm²
0.5-2.5mm²
without cable cover`s
18.3
77.1
14.6
Notes:
Note3: The use of sleeve or ferrule terminations is recommended.
+
ꢁ
ꢀ
Top View
INSTALLATION and APPLICATION
Dimming Type
Value
AC phase-cut
work with leading/trailing edge dimmers
Connection
L N
LED+
LED-
L-4
REV.: 0/2017
www.recom-power.com
RACT25
DC/DC Converter
Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified)
Series
PACKAGING INFORMATION
Parameter
Packaging Dimension (LxWxH)
Packaging Quantity
Type
cardboard box
Value
330.0 x 137.0 x 55.0mm
10pcs
Storage Temperature Range
Storage Humidity
-20°C to +70°C
5-85% RH
non-condensing
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written
consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 0/2017
L-5
相关型号:
©2020 ICPDF网 联系我们和版权申明