RNA51955BFPH0 [RENESAS]
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8, 4.40 X 4.85 MM, 1.27 MM PITCH, PLASTIC, SOP-8;型号: | RNA51955BFPH0 |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8, 4.40 X 4.85 MM, 1.27 MM PITCH, PLASTIC, SOP-8 光电二极管 |
文件: | 总12页 (文件大小:123K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Preliminary Datasheet
RNA51955A, B
Voltage Detecting, System Resetting IC Series
R03DS0004EJ0300
Rev.3.00
Jun 19, 2012
Description
RNA51955A,B are semiconductor integrated circuits for resetting of all types of logic circuits such as CPUs, and has
the feature of setting the detection voltage by adding external resistance.
They include a built-in delay circuit to provide a retardation time (200 s Typ).
They fined extensive applications, including battery checking circuit, level detecting circuit and waveform shaping
circuit.
Features
Few external parts
Low threshold operating voltage (Supply voltage to keep low-state at low supply voltage):
0.6 V (Typ) at RL = 22 k
Wide supply voltage range: 2 V to 17 V
Wide application range
Ordering Information
Taping Abbreviation
Package
Abbreviation
Surface
Treatment
Part Name
Package Type
Package Code
(Quantity)
RNA51955AFPH0
RNA51955APT0
RNA51955BFPH0
RNA51955BPT0
SOP-8 pin
DIP-8 pin
SOP-8 pin
DIP-8 pin
PRSP0008DE-C
PRDP0008AF-B
PRSP0008DE-C
PRDP0008AF-B
FP
P
H (2,500 pcs / Reel)
T (1,000 pcs / Box)
H (2,500 pcs / Reel)
T (1,000 pcs / Box)
0 (Ni/Pd/Au)
0 (Ni/Pd/Au)
0 (Ni/Pd/Au)
0 (Ni/Pd/Au)
FP
P
Application
Reset circuit of Pch, Nch, CMOS, microcomputer, CPU and MCU, Reset of logic circuit, Battery check circuit,
switching circuit back-up voltage, level detecting circuit, waveform shaping circuit, delay waveform generating
circuit, DC/DC converter, over voltage protection circuit
Recommended Operating Condition
Supply voltage range: 2 V to 17 V
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 1 of 11
RNA51955A, B
Preliminary
Outline and Article Indication
• RNA51955A, B
Part No.
Lot No.
R 9 5 5 A
YMWC
CCC
R 9 5 5 B
YMWC
CCC
Y: Year Code
(the last digit of year)
M: Month Code
W: Week Code
C: Control Code
SOP-8
Pin No.1
Trace Code
Part No.
R 5 1 9 5 5 A
R 5 1 9 5 5 B
Y M W
Y M W
DIP-8
W: Week Code
M: Month Code
Y: Year Code
Pin Arrangement
RNA51955A, B
NC
Input
NC
1
2
3
4
8
NC
7
6
5
Power-supply
Output
NC
GND
(Top view)
NC: No Connection
Outline: PRSP0008DE-C (SOP-8)
PRDP0008AF-B (DIP-8)
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 2 of 11
RNA51955A, B
Preliminary
Block Diagram
RNA51955A, B
Power-
supply
A: Built-in Load
B: Open Collector
25 μA
Typ
Output
–
+
Input
–
C
1.25 V
Delay capacitor
GND
Operating Waveform
RNA51955A, B
1.25 V
t
t
H
L
td
td
td ≈ 200 μs
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 3 of 11
RNA51955A, B
Preliminary
Absolute Maximum Ratings
(Ta = 25°C, unless otherwise noted)
Item
Symbol
VCC
Ratings
Unit
V
Conditions
Supply voltage
Output sink current
18
6
Isink
mA
VCC
Type A (output with constant current load)
Output voltage
VO
Pd
K
V
18
Type B (open collector output)
8-pin SOP (PRSP0008DE-C)
8-pin DIP (PRDP0008AF-B)
8-pin SOP (PRSP0008DE-C)
8-pin DIP (PRDP0008AF-B)
400
Power dissipation
Thermal derating
mW
570
4.4
Refer to the thermal
derating curve.
mW/°C
8.3
Operating temperature Topr
–40 to +85
–55 to +125
–0.3 to VCC
–0.3 to +7
°C
°C
Storage temperature
Tstg
VCC 7 V
Input voltage range
VIN
V
VCC > 7 V
Electrical Characteristics
(Ta = 25°C, unless otherwise noted)
“L” reset type
Item
Symbol
VS
Min
Typ
Max
Unit
V
Test Conditions
Detecting voltage
Hysteresis voltage
1.20
9
1.25
15
1.30
23
VS
mV
VCC = 5V
Detecting voltage
VS/T
VCC
Vin
IIN
—
0.01
—
%/°C
V
temperature coefficient
Supply voltage range
Input voltage range
Input current
2
–0.3
–0.3
—
—
—
17
VCC
7.0
VCC 7V
V
—
VCC > 7V
100
390
360
200
500
590
540
500
nA
A
s
V
VIN = 1.25V
—
Type A, VCC = 5V
Type B, VCC = 5V
Circuit current
ICC
—
Delay time
tpd
80
Output saturation
voltage
Vsat
—
0.2
0.4
L reset type, VCC = 5V, VIN < 1.2V, Isink = 4mA
—
—
0.67
0.55
0.8
0.7
RL = 2.2k, Vsat 0.4V
Threshold operating
voltage
L reset type minimum supply
voltage for IC operation
VOPL
V
RL = 100k, Vsat 0.4V
Output leakage
current
IOH
—
—
30
nA
Type B
Output load current
Output high voltage
IOC
–40
–25
–17
—
A
Type A, VCC = 5V, VO = 1/2 VCC
VOH
VCC–0.2 VCC–0.06
V
Type A
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 4 of 11
RNA51955A, B
Preliminary
Typical Characteristics
Thermal Derating
Detection Voltage vs. Ambient Temperature
600
500
400
300
200
100
0
1.28
1.27
1.26
1.25
1.24
1.23
1.22
8-pin DIP
(PRDP0008AF-B)
VSH
VSL
8-pin SOP
(PRSP0008DE-C)
85
0
25
50
75
100 125
–40 –20
0
20 40 60 80 100
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Detection Voltage vs. Supply Voltage
1.28
Input Current vs. Supply Voltage
VIN = 1.25 V
250
200
150
100
50
1.27
1.26
1.25
1.24
1.23
1.22
VSH
Ta = –40°C
VSL
Ta = 25°C
Ta = 85°C
0
0
0
4
8
12
16
20
4
8
12
16
20
Supply Voltage VCC (V)
Supply Voltage VCC (V)
Delay Time vs. Ambient Temperature
350
Threshold Operating Voltage
1.0
0.8
0.6
0.4
0.2
0
Ta = 25°C
300
250
200
150
100
50
VCC = 5V
10V
RL = 2.2 kΩ
RL = 22 kΩ
RL = 100 kΩ
VCC = 15V
0
–40 –20
0
20 40 60 80 100
0
0.2
0.4
0.6
0.8
1.0
Ambient Temperature Ta (°C)
Supply Voltage VCC (V)
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 5 of 11
RNA51955A, B
Preliminary
Output Load Current vs. Output Voltage
(RNA51955A)
Output Saturation Voltage vs. Output Sink Current
0.3
0.2
0.1
0
VCC = 4 V
–40
–30
–20
–10
0
VCC = 5 V VCC = 10 V VCC = 15 V
0
1
2
3
4
5
6
0
4
8
12
16
Output Sink Current Isink (mA)
Output Voltage VO (V)
Circuit Current vs. Supply Voltage
(RNA51955B)
800
600
400
200
0
Ta = –40°C
Ta = 25°C
Ta = 85°C
0
4
8
12
16
Supply Voltage VCC (V)
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 6 of 11
RNA51955A, B
Preliminary
Example of Application Circuit
Reset Circuit of RNA51955
VCC
Power-
supply
Power-
supply
R1
RL
Input
Output
RESET
Logic circuit
RNA51955x
R2
GND
GND
Figure 1 Reset Circuit of RNA51955
Notes: 1. The detecting supply voltage is VS (R1 +R2)/R2 (V) approximately. VS = 1.25 V (Typ)
The detecting supply voltage can be set between 2 V and 15 V.
2. Delay time must be longer than 200 s, RNA51953, RNA51957, and RNA51958 are used. In this case, the
delay time is about 0.34 Cd (pF) s.
3. If the RNA5195xx and the logic circuit share a common power source, type A (built-in load type) can be
used whether a pull-up resistor is included in the logic circuit or not.
4. The logic circuit preferably should not have a pull-down resistor, but if one is present, add load resistor RL to
overcome the pull-down resistor.
5. When a negative supply voltage is used, the supply voltage side of RNA5195xx and the GND side are
connected to negative supply voltage respectively.
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 7 of 11
RNA51955A, B
Preliminary
Notice for use
About the Power Supply Line
1. About bypass capacitor
Because the ripple and the spike of the high frequency noise and the low frequency are superimposed to the power
supply line, it is necessary to remove these.
Therefore, please install C1 and C2 for the low frequency and for the high frequency between the power supply line
and the GND line as shown in following figure 2.
VCC
+
C1
C2
Power-supply
Output
R1
Input
Example of ripple
noise measures
Vin
R2
RNA51955
GND
Figure 2 Example of Ripple Noise Measures
2. The sequence of voltage impression
Please do not impress the voltages to the input terminals earlier than the power supply terminal. Moreover, please
do not open the power supply terminal with the voltage impressed to the input terminal.
(The setting of the bias of an internal circuit collapses, and a parasitic element might operate.)
About the Input Terminal
1. Setting range of input voltage
The following voltage is recommended to be input to the input terminal (pin 2).
about 0.8 (V) < Vin < VCC – 0.3 (V) ... at VCC 7 V
about 0.8 (V) < Vin < 6.7 (V) ............. at VCC > 7 V
2. About using input terminal
Please do an enough verification to the transition characteristic etc. of the power supply when using independent
power supply to input terminal (pin 2).
VCC
Vin is decided to the VCC subordinating,
and operates in the range
about 0.8 (V) < Vin < VCC – 0.3 (V).
Power-supply
Input
Output
RNA51955
Vin
GND
Figure 3 Recommended Example
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 8 of 11
RNA51955A, B
Preliminary
Independent
VCC
1
VCC
2
VCC
Independent
Input
Power-supply
Output
Power-supply
Output
Input
Vin
RNA51955
Vin
RNA51955
VCC
GND
GND
GND
Example 1. Independent power supply system
Please do enough verifying about
transition characteristic of VCC1
and VCC2.
Example 2. Logic pulse input
(not recommended)
Figure 4
3. Calculation of detecting voltage
Detecting voltage Vs can be calculated by the following expression.
However, the error margin is caused in the detecting voltage because input current Iin (standard 100 nA) exists if it
sets too big resistance.
Please set the constant to disregard this error margin.
R + R
1
2
V = 1.25 ×
S
+ Iin × R
1
R
2
error margin
VCC
Power-supply
Output
R1
Iin
→
Vin
RNA51955
Input
R2
GND
Figure 5 Influence of Input Current
4. About the voltage input outside ratings
Please do not input the voltage outside ratings to the input terminal.
An internal protection diode becomes order bias, and a large current flows.
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 9 of 11
RNA51955A, B
Preliminary
Setting of Output Load Resistance (RNA51955B)
High level output voltage can be set without depending on the power-supply voltage because the output terminal is an
open collector type. However, please guard the following notes.
1. Please set it in value (2 V to 17 V) within the range of the power-supply voltage recommendation.
Moreover, please never impress the voltage of maximum ratings 18 V or more even momentarily either.
2. Please set output load resistance (pull-up resistance) RL so that the output current (output inflow current IL) at L
level may become 4 mA or less. Moreover, please never exceed absolute maximum rating (6 mA).
VCC (2 V to 17 V)
RL
6
IL ≤ 4 mA
Figure 6 Output Load Resistance RL
Others
1. Notes when IC is handled are published in our reliability handbook, and please refer it.
The reliability handbook can be downloaded from our homepage (following URL).
http://www.renesas.com/products/common_info/reliability/index.jsp
2. Additionally, please inquire of our company when there is an uncertain point on use.
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 10 of 11
RNA51955A, B
Preliminary
Package Dimensions
JEITA Package Code
P-SOP8-4.4x4.85-1.27
RENESAS Code
Previous Code
—
MASS[Typ.]
0.1g
PRSP0008DE-C
F
*1
D
NOTE)
8
5
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
bp
Index mark
Terminal cross section
( Ni/Pd/Au plating )
Dimension in Millimeters
Reference
Symbol
1
4
Min Nom Max
*3
e
bp
Z
D
E
A2
4.65 4.85 5.05
4.4 4.6
1.85
x
M
4.2
L1
A1 0.00 0.1 0.20
2.03
A
bp 0.34 0.4 0.46
b1
c
c1
0.15 0.20 0.25
L
θ
0° 8°
HE 5.7 6.2 6.5
y
Detail F
e
1.12 1.27 1.42
0.12
x
y
Z
L
0.10
0.75
0.25 0.45 0.65
0.90
L1
JEITA Package Code
P-DIP8-6.3x9.6-2.54
RENESAS Code
PRDP0008AF-B
Previous Code
DP-8FV
MASS[Typ.]
0.54g
D
8
5
1
4
b 3
0.89
Z
Dimension in Millimeters
Min Nom Max
7.62
Reference
Symbol
e1
D
E
A
A1
bp
b3
c
9.60 10.6
6.30 7.4
5.06
bp
e
c
0.5
0.40 0.48 0.56
1.30
0.19 0.25 0.31
e1
( Ni/Pd/Au plating )
θ
15°
0°
2.29 2.54 2.79
e
Z
1.27
2.54
L
R03DS0004EJ0300 Rev.3.00
Jun 19, 2012
Page 11 of 11
Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
SALES OFFICES
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2012 Renesas Electronics Corporation. All rights reserved.
Colophon 2.0
相关型号:
RNA51955BPT0
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8, 6.30 X 9.60 MM, 2.54 MM PITCH, PLASTIC, DIP-8
RENESAS
©2020 ICPDF网 联系我们和版权申明