PCI1512GVF [ROCHESTER]
PCI BUS CONTROLLER, PBGA216, PLASTIC, BGA-216;型号: | PCI1512GVF |
厂家: | Rochester Electronics |
描述: | PCI BUS CONTROLLER, PBGA216, PLASTIC, BGA-216 时钟 PC 外围集成电路 |
文件: | 总7页 (文件大小:888K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PCI1512
www.ti.com
SLLA231–JUNE 2006
CardBus Controller
FEATURES
•
Serial EEPROM Interface for Loading
Subsystem ID, Subsystem Vendor ID, and
Other Configuration Registers
•
A 216-Terminal MicroStar BGA™ PBGA
(GVF/ZVF) Package
•
Pipelined Architecture for Greater Than
130-Mbps Throughput from CardBus-to-PCI
and from PCI-to-CardBus
•
2.5-V Core Logic and 3.3-V I/O with Universal
PCI Interfaces Compatible with 3.3-V and 5-V
PCI Signaling Environments
•
•
•
Up to Five General-Purpose I/Os
•
Integrated Low-Dropout Voltage Regulator
LDO-VR) Eliminates the Need for an External
2.5-V Power Supply
Programmable Output Select for CLKRUN
Five PCI Memory Windows and Two I/O
Windows Available for the 16-Bit Interface
•
•
•
•
•
Mix-and-Match 5-V/3.3-V 16-Bit PC Cards and
3.3-V CardBus Cards
•
•
Two I/O Windows and Two Memory Windows
Available to the CardBus Socket
A Single PC Card or CardBus Slot with Hot
Insertion and Removal
Exchangeable-Card-Architecture- (ExCA-)
Compatible Registers Are Mapped in Memory
and I/O Space
Parallel Interface to TI TPS2211A Single-Slot
PC Card Power Switch
Burst Transfers to Maximize Data Throughput
with CardBus Cards
•
•
Intel™ 82365SL-DF and 82365SL Register
Compatible
Interrupt Configurations: Parallel PCI,
Serialized PCI, Parallel ISA, and Serialized
ISA
Ring Indicate, SUSPEND, PCI CLKRUN, and
CardBus CCLKRUN
•
•
•
Socket Activity LED Terminal
PCI Bus Lock (LOCK)
Internal Ring Oscillator
DESCRIPTION
The Texas Instruments PCI1512 device, a 216-terminal MicroStar BGA™ single-slot CardBus controller
designed to meet the PCI Bus Power Management Interface Specification for PCI to CardBus Bridges, is an
ultralow-power high-performance PCI-to-CardBus controller that supports a single PC card socket compliant with
the PC Card Standard (Revision 7.2). The controller provides features that make it the best choice for bridging
between PCI and PC Cards in both notebook and desktop computers. The PC Card Standard retains the 16-bit
PC Card specification defined in the PCI Local Bus Specification and defines the 32-bit PC Card, CardBus,
capable of full 32-bit data transfers at 33 MHz. The controller supports both 16-bit and CardBus PC Cards,
powered at 5 V or 3.3 V, as required.
The controller is compliant with the PCI Local Bus Specification, and its PCI interface can act as either a PCI
master device or a PCI slave device. The PCI bus mastering is initiated during CardBus PC Card bridging
transactions. The controller is also compliant with PCI Bus Power Management Interface Specification (Revision
1.1).
All card signals are internally buffered to allow hot insertion and removal without external buffering. The
controller is register-compatible with the Intel 82365SL-DF and 82365SL ExCA controllers. The controller
internal data path logic allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for
maximum performance. Independent buffering and a pipeline architecture provide an unsurpassed performance
level with sustained bursting. The controller can also be programmed to accept fast posted writes to improve
system-bus utilization.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MicroStar BGA is a trademark of Texas Instruments.
Intel is a trademark of Intel Corporation.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
PCI1512
www.ti.com
SLLA231–JUNE 2006
Multiple system-interrupt signaling options are provided, including parallel PCI, parallel ISA, serialized ISA, and
serialized PCI. Furthermore, general-purpose inputs and outputs are provided for the board designer to
implement sideband functions. Many other features designed into the PCI1512 controller, such as a socket
activity light-emitting diode (LED) outputs, are discussed in detail throughout this document.
An advanced complementary metal-oxide semiconductor (CMOS) process achieves low system power
consumption while operating at PCI clock rates up to 33 MHz. Several low-power modes enable the host
power-management system to further reduce power consumption.
NOTE:
This product is for high-volume PC applications only. For a complete datasheet or
more information contact support@ti.com.
2
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
30-Nov-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
BGA
BGA
Drawing
PCI1512GVF
PCI1512ZVF
ACTIVE
NRND
GVF
216
216
TBD
Call TI
Call TI
ZVF
90
90
Pb-Free
(RoHS)
SNAGCU
Level-3-250C-1 WEEK
SN2005111512ZVF
NRND
BGA
ZVF
216
Pb-Free
(RoHS)
SNAGCU
Level-3-250C-1 WEEK
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
RFID
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lpw
Telephony
Low Power
Wireless
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明