PML50HZPJV2L2 [ROHM]
Ultra-low Ohmic Resistors for Current Detection (Wide terminal type); 超低阻值电阻器的电流检测(广角端型)型号: | PML50HZPJV2L2 |
厂家: | ROHM |
描述: | Ultra-low Ohmic Resistors for Current Detection (Wide terminal type) |
文件: | 总3页 (文件大小:135K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultra-low Ohmic Resistors for Current Detection
(Wide terminal type)
PML50
*Under development
Features
1) Ultra-low resistance range (0.5m-)
2) Wide terminal configuration for high joint reliability.
3) Unique trimless structure utilized for improved current detection accuracy.
ISO9001- / ISO/TS 16949- approved
Tentative specification
Operating
temperature range
(°C)
Resistance
tolerance
Rated power
Resistance value
Part No.
Size code
(mΩ)
(70°C)
1.5W
(2W at 25
0.5, 1, 1.5, 2, 2.2
PML50
5025 (2010)
−55 to
+
155
J ( 5%)
)
°C
: Under development
The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specifications.
Dimensions (Unit : mm)
Part No.
Size code
5025
L
W
t
a
b
∗
∗
0.4 0.20 1.0 to 0.5 0.20
PML50
2.5 0.20
5.0 0.20
0.52 to 0.32 0.15
∗ : Each value range varies with the resistance.
Part No. Explanation
P M L 5 0 H Z P
J
V
Part No.
Resistance tolerance
5%
Special part number
Nominal resistance
Resistance code, 3 digits.
±
J
Resistance
Value
(J)
3 digits
0.5mΩ
0L5
1L0
1L5
1mΩ
1.5mΩ
2mΩ
2.2mΩ
2L0
2L2
Packaging Specifications Code
Resistance tolerance
Part No.
Code
HZP
Packaging specifications
Reel
180mm (7inch)
Basic ordering unit (pcs)
J(±5%)
,
φ
PML50
Embossed tape (4mm Pitch)
2 000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
: Under development
www.rohm.com
2010.03 - Rev.A
1/2
c
○ 2010 ROHM Co., Ltd. All rights reserved.
PML50
Data Sheet
Packaging
Reel
Taping
P
0
P2
D
φ
A
B
D
K
A
0
P1
C
(Unit : mm)
Label
W
F
E
A
0
B0
EIAJ ET-7200B compliant
12.0 0.3
5.5 0.05
1.75 0.1
2.9 0.2
5.3 0.2
K
(Unit : mm)
D
A
B
C
D0
P0
P
1
P2
0
−1.5
+1
0
+1.0
0
+0.1
0
φ180
φ13 0.2
φ60
13
4.0 0.1
4.0 0.1
2.0 0.05
Max. 1.1
φ1.5
www.rohm.com
2010.03 - Rev.A
2/2
c
○ 2010 ROHM Co., Ltd. All rights reserved.
Notice
N o t e s
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010
A
©2020 ICPDF网 联系我们和版权申明