uClamp1211Z.TFT [SEMTECH]
1 Line, 12V ESD Protection;型号: | uClamp1211Z.TFT |
厂家: | SEMTECH CORPORATION |
描述: | 1 Line, 12V ESD Protection |
文件: | 总7页 (文件大小:319K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
μClamp1211Z
Ultra Small μClamp®
1 Line, 12V ESD Protection
PROTECTION PRODUCTS
Description
Features
•
•
High ESD withstand Voltage: +/-30kV (Contact/Air) per
IEC 61000-4-2
Able to withstand over 1000 ESD strikes per IEC61000-
4-2 Level 4
Ultra-small 0201 package
Protects one data line or power line
Low leakage current: <50nA (VR=12V)
Working voltage: +/-12V
Low dynamic resistance: 0.30 Ω (typ)
Solid-state silicon-avalanche technology
μClamp® TVS diodes are designed to protect sensitive
electronics from damage or latch-up due to ESD. They
features large cross-sectional area junctions for
conducting high transient currents. These devices offer
desirable characteristics for board level protection
including fast response time, low operating and
clamping voltage,and no device degradation.
•
•
•
•
•
•
The μClamp®1211Z is in a 2-pin SLP0603P2X3 package.
It measures 0.6 x 0.3 mm with a nominal height
of only 0.25mm. The leads are finished with lead-free
NiAu. Each device will protect one line operating at
12 volts. It gives the designer the flexibility to protect
single lines in applications where arrays are not practical.
The combination of small size and high ESD surge
capability makes them ideal for use in portable
applications such as cellular phones, digital cameras, and
tablet PC’s.
Mechanical Characteristics
•
•
•
•
•
•
SLP0603P2X3 package
Pb-Free, Halogen Free, RoHS/WEEE compliant
Nominal Dimensions: 0.6 x 0.3 x 0.25 mm
Lead Finish: NiAu
Marking: Marking code + dot matrix date code
Packaging: Tape and Reel
Applications
•
•
•
•
Cellular Handsets & Accessories
Portable Instrumentation
12V Power Protection
Tablet PC
Package Dimension
Schematic & Pin Configuration
0.620
0.220
0.320
0.160
0.250
1
0.355 BSC
2
SLP0603P2X3 (Bottom View)
Nominal Dimensions (mm)
μClamp1211Z
Final Datasheet
Revision date
1 of 7
Semtech
www.semtech.com
Rev 5.1
2/22/2017
Absolute Maximum Rating
Rating
Symbol
Value
175
7
Units
W
Peak Pulse Power (tp = 8/20µs)
PPK
IPP
Peak Pulse Current (tp = 8/20µs)
A
ESD per IEC 61000-4-2 (Air)(1)
30
30
VESD
kV
ESD per IEC 61000-4-2 (Contact)(1)
Operating Temperature
Storage Temperature
TJ
-55 to +125
-55 to +150
OC
OC
TSTG
Electrical Characteristics (T=25OC unless otherwise specified)
Parameter
Symbol Conditions
Min. Typ. Max. Units
Reverse Stand-Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
VRWM
VBR
IR
Pin1 to 2 or 2 to 1
12
V
It = 1mA, Pin 1 to 2 or 2 to 1
VRWM = 12V, Pin 1 to 2 or 2 to 1
14.2 15.8 18
V
<5
50
nA
IPP=1A, tp = 8/20μs,
Pin1 to 2 or 2 to 1
Clamping Voltage
Clamping Voltage
VC
VC
20
V
V
Ipp=7A, tp=8/20μs
Pin1 to 2 or 2 to 1
25
25
IPP = 4A
tp = 0.2/100ns
17.2
21
ESD Clamping Voltage2
VC
V
IPP = 16A
Dynamic Resistance2,3
Junction Capacitance
RDYN
CJ
tp = 0.2/100ns
0.30
19
Ω
VR = 0V, f = 1MHz T = 25OC
pF
Notes
1) ESD gun return path connected to ESD ground plane.
2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns.
3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A
μClamp1211Z
Final Datasheet
Revision Date
2 of 7
Semtech
www.semtech.com
Rev 5.1
2/22/2017
Typical Characteristics
Clamping Voltage vs. Peak Pulse Current (tp=8/20 μs)
Non-Repetitive Peak Pulse Power vs. Pulse Time
25
10
TA = 25OC
20
15
10
1
0.1
5
Waveform:
Parameters:
tr = 8µs
td = 20µs
DR040412-125
0.01
0
0.1
1
10
100
1000
0
1
2
3
4
5
6
7
8
Pulse Duration - tp (µs)
Peak Pulse Current - IPP (A)
Capacitance vs. Reverse Voltage
TLP Characteristic (Positive Pulse)
25
20
15
10
5
30
25
20
15
10
5
f = 1 MHz
12 14
0
0
0
2
4
6
8
10
0
5
10
15
20
25
30
Reverse Voltage - VR (V)
TLP Voltage (V)
ESD Clamping (8kV Contact per IEC 61000-4-2)
ESD Clamping (-8kV Contact per IEC 61000-4-2)
0
45
40
35
30
25
20
15
10
5
-5
-10
-15
-20
-25
-30
-35
-40
-45
Measured with 50 Ohm scope input
Measured with 50 Ohm scope input
impedance, 2GHz bandwidth. Corrected for
50 Ohm, 20dB attenuator. ESD gun return
path connected to ESD ground plane
impedance, 2GHz bandwidth. Corrected for
50 Ohm, 20dB attenuator. ESD gun return
path connected to ESD ground plane
0
-10
0
10
20
30
40
50
60
70
80
-10
0
10
20
30
40
50
60
70
80
Time (ns)
Time (ns)
μClamp1211Z
Final Datasheet
Revision Date
3 of 7
Semtech
www.semtech.com
Rev 5.1
2/22/2017
Application Information
Assembly Guidelines
Recommended Mounting Pattern
The small size of this device means that some care must
be taken during the mounting process to insure reliable
solder joints. The figure at the right details Semtech’s
recommended mounting pattern. Recommended
assembly guidelines are shown in Table 1. Note that
these are only recommendations and should serve only
as a starting point for design since there are many factors
that affect the assembly process. Exact manufacturing
parameters will require some experimentation to get the
desired solder application.
Land Pattern
Component
0.270
0.620
0.675
0.175
0.250
Solder Stencil
Stencil design is one of the key factors which will
determine the volume of solder paste which is deposited
onto the land pad. The area ratio of the stencil aperture
will determine how well the stencil will print. The area
ratio takes into account the aperture shape, aperture
size, and stencil thickness. A minimum area ratio of 0.66
is preferred for the subject package. The area ratio of a
rectangular aperture is given as:
0.320
Stencil Opening
All Dimensions are in mm.
Land Pad.
Stencil opening
Component
Table 1 - Assembly Guidelines
Area Ratio = (L * W )/ (2 * (L + W) * T)
Assembly Parameter
Solder Stencil Design
Aperture Shape
Recommendation
Laser Cut, Electro-Polished
Where:
L = Aperture Length
W = Aperture Width
T = Stencil Thickness
Rectangular with
Rounded Corners
Solder Stencil Thickness
Solder Paste Type
0.075mm (0.003”) or
0.100mm (0.004”)
Semtech recommends a stencil with square aperture
and rounded corners for consistent solder release. The
stencil should be laser cut with electropolished finish. A
stencil thickness of 0.075mm (0.003”) is recommended.
A 0.100mm (0.004”) stencil may be used, however the
stencil opening may need to be increased slightly to
achieve the desired area ratio to ensure proper solder
coverage on the pad.
Type 4 Size Sphere or
Smaller
Solder Reflow Profile
PCB Solder Pad Design
PCB Pad Finish
Per JEDEC J-STD-020
Solder Mask Defined
OSP or NiAu
μClamp1211Z
Final Datasheet
Revision Date
4 of 7
Semtech
www.semtech.com
Rev 5.1
2/22/2017
Outline Drawing - SLP0603P2X3
B
E
D
A
DIMENSIONS
MILLIMETERS
DIM
A
MIN NOM MAX
0.235 0.250 0.265
A1 0.000 0.02 0.025
b
D
E
e
0.20 0.22 0.24
0.62
0.32
0.585
0.655
0.285
0.355
0.355 BSC
TOP VIEW
L
0.140 0.160 0.180
2
N
aaa
0.08
0.10
bbb
A
SEATING
PLANE
aaa
C
C
A1
e/2
R0.025
TYP
bxN
A B
bbb
C
2X L
e
BOTTOM VIEW
NOTES:
1.
CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
Land Pattern - SLP0603P2X3
DIMENSIONS
DIM MILLIMETERS
(0.425)
0.175
0.270
0.250
0.675
C
G
X
Y
Z
Z
(C)
G
Y
X
NOTES:
1.
2.
CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY.
CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR
COMPANY'S MANUFACTURING GUIDELINES ARE MET.
μClamp1211Z
Final Datasheet
Revision Date
5 of 7
Semtech
www.semtech.com
Rev 5.1
2/22/2017
Marking Code
S
Tape and Reel Specification
Date Code Location
(Towards Sprocket Holes)
Ordering Information
Part Number
Qty per Reel Reel Size
μClamp1211Z.TFT
15,000
7”
μClamp1211Z
Final Datasheet
Revision Date
6 of 7
Semtech
www.semtech.com
Rev 5.1
2/22/2017
IMPORTANT NOTICE
Information relating to this product and the application or design described herein is believed to be reliable, however such information is provided as a
guide only and Semtech assumes no liability for any errors in this document, or for the application or design described herein. Semtech reserves the right
to make changes to the product or this document at any time without notice. Buyers should obtain the latest relevant information before placing orders
and should verify that such information is current and complete. Semtech warrants performance of its products to the specifications applicable at the time
of sale, and all sales are made in accordance with Semtech’s standard terms and conditions of sale.
SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES
OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL INJURY, LOSS OF LIFE
OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE UNDERTAKEN
SOLELY AT THE CUSTOMER’S OWN RISK. Should a customer purchase or use Semtech products for any such unauthorized application, the customer shall
indemnify and hold Semtech and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney
fees which could arise.
The Semtech name and logo are registered trademarks of the Semtech Corporation. All other trademarks and trade names mentioned may be marks and
names of Semtech or their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document
without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any
particular purpose. All rights reserved.
© Semtech 2015
Contact Information
Semtech Corporation
200 Flynn Road, Camarillo, CA 93012
Phone: (805) 498-2111, Fax: (805) 498-3804
www.semtech.com
μClamp1211Z
Final Datasheet
Revision date
7 of 7
Semtech
5.1
2/22/2017
相关型号:
UCLAMP1271P.TNT
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon,
SEMTECH
©2020 ICPDF网 联系我们和版权申明