SGM2541 [SGMICRO]
28V/16V Bidirectional Load Switch with Wireless/Dual Input Capability;![SGM2541](http://pdffile.icpdf.com/pdf2/p00366/img/icpdf/SGM2541_2237211_icpdf.jpg)
型号: | SGM2541 |
厂家: | ![]() |
描述: | 28V/16V Bidirectional Load Switch with Wireless/Dual Input Capability 无线 |
文件: | 总11页 (文件大小:620K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
SGM2541
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
GENERAL DESCRIPTION
FEATURES
The SGM2541 bidirectional load switch is designed for
systems or chargers with high voltage quick charging
capability and wireless charging capability. The device
supports up to 20V operating input voltage (28V
withstand) at USBIN pins, and provides input
voltage-clamped protection for input surge events up to
130V. The device can also provide 16V reverse voltage
at the OUT pins.
● Bidirectional Switch for USBIN and OUT to Allow
On-The-Go (OTG) Mode
● Input Voltage Range:
3V to 20V at USBIN and 3V to 16V at OUT
● Programmable OVP Threshold Voltages
● 28V Tolerance on USBIN Pin
● 130V Surge Protection
● 5A Continuous Current from USBIN to OUT
● 5A Continuous Current from OUT to USBIN in
OTG Mode
The two OVP threshold voltages (17V/13V) can be
programmed through VP pin. The over-voltage
protection function can ensure the safe operation of
surge events in any state.
● Low On-Resistance: 29mΩ (TYP)
● 1.4V Control Logic
● Soft-Start to Reduce Input Peak Current
● Available in a Green WLCSP-2.43×1.75-20B Package
● -40℃ to +85℃ Operating Temperature Range
The addition of a wireless Rx with an enable/disable pin
allows the load switch to implement an equivalent 2:1
power multiplexer (PMUX).
The bidirectional device can detect and support
USB-OTG applications. It also includes under-voltage
lockout, over-voltage lockout and over-temperature
protection circuits designed to automatically isolate the
power switch terminals when a fault condition occurs.
APPLICATIONS
Smart Phone
Tablet PC
Mobile Devices with Wireless Charging Options
The SGM2541 is available in a Green WLCSP-2.43×
1.75-20B package. It operates over an ambient
temperature range of -40℃ to +85℃.
SG Micro Corp
FEBRUARY 2021 – REV. A. 3
www.sg-micro.com
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
XXXXX
2541YG
SGM2541 WLCSP-2.43×1.75-20B
SGM2541YG/TR
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: XXXXX = Date Code, Trace Code and Vendor Code.
X X X X X
Vendor Code
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
OVERSTRESS CAUTION
VUSBIN_ABSMAX....................................................................28V
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
V
USBIN to VOUT (Differential Input, Blocking)......................28V
VOUT to VUSBIN (Differential Input, Blocking)......................16V
VOUT_MAX, VUSB_SNS ...........................................................20V
Control Pin Voltages ..........................................................6V
Junction Temperature .................................................+150℃
Storage Temperature Range.........................-65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................2000V
MM.................................................................................400V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
Input Voltage Range ...............................................3V to 20V
Operating Ambient Temperature Range..........-40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
FEBRUARY 2021
2
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
PIN CONFIGURATION
(TOP VIEW)
1
2
3
4
5
A
B
C
D
USBIN
USBIN
USBIN
USBIN
USBIN
USBIN
OUT
USBIN
OUT
USBIN
VP
GND
GND
USB
_SNS
FLAG_N
OUT
OUT
OUT
EN_N
RX_N
WLCSP-2.43×1.75-20B
PIN DESCRIPTION
PIN
NAME
USBIN
GND
FUNCTION
A1 - A5,
B1 - B3
Switch Input Pin. A capacitor needs to be added between USBIN pin and GND.
Ground.
B4, B5
C1, C2,
D1 - D3
Switch Output Pin. Connect this pin to the charger input pins, output capacitors, and wireless Rx
output node for dual input configurations.
OUT
Programmable OVP Voltage Pin. The two OVP threshold voltages can be programmed through
VP pin. Connect the pin to GND to select 17V (TYP). Float the pin to select 13V (TYP).
C3
C4
VP
FLAG_N
Flag Pin.
USB_SNS is a Clamped USBIN Sense Pin. In slave mode, connect this pin to the input sense
pin of the system that can respond to a valid USBIN voltage. This pin is optional in autonomous
mode for system diagnostic purposes. An optional ceramic capacitor may be added from this pin
to GND, sized as needed.
C5
USB_SNS
Active Low Enable Pin. In slave mode, connect this pin to the system’s enable logic pin. In
autonomous mode, pull this pin logic low, or tie it to the external GND plane.
D4
D5
EN_N
RX_N
Active Low Wireless Rx Enable Pin.
In slave mode, pull this pin logic low, or tie to an external GND plane. In autonomous mode,
connect this pin to the wireless Rx active low enable pin if a system output control pin is not
available.
SG Micro Corp
www.sg-micro.com
FEBRUARY 2021
3
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
ELECTRICAL CHARACTERISTICS
(VUSBIN = 5V, VOUT = 5V, CUSBIN = 1μF, COUT = 10μF, CUSB_SNS = 1μF, Full = -40℃ to +85℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP MIN
TYP MAX UNITS
Input Voltage Range
VUSBIN
Full
3
3
20
V
V
Output Voltage Range
VOUT
Full
VOVP
2.97
2.78
VUVLO_USBIN
VUVLO_OUT
VUVLO_HYS
Rising
Rising
+25℃
+25℃
+25℃
2.84
2.65
0.52
Input/Output Under-Voltage Lockout
UVLO Hysteresis
V
V
V
VUSBIN > VOVP enters fault state; the VP
pin is tied to ground.
VUSBIN > VOVP enters fault state; the VP
pin is floating.
Full 16.38
17
17.62
13.46
Input Over-Voltage Protection Threshold
VOVP Hysteresis
VOVP
Full 12.52
13
V
VOVP_HYS
VUSB_SNS
+25℃
0.43
V
V
IUSB_SNS = 0, the VP pin is tied to ground.
IUSB_SNS = 0, the VP pin is floating.
IUSB_SNS = 20mA
Full 16.61 17.3
18
Maximum USB_SNS Pin Clamping
Voltage
Full 12.75 13.3 13.76
V
Sense Pin Voltage Drop When Loaded
∆VUSB_SNS
IQ_USBIN_OP
IQ_OUT_OP
+25℃
Full
30
50
mV
Switch conducting, USBIN = 5V.
Switch conducting, OUT = 5V.
123
125
190
190
Input Quiescent Current in Operating
State
μA
mA
V
Full
Input Quiescent Current in Clamping
State
IQ_USBIN_CLAMP USBIN-GND current (clamping).
Switch not conducting, VUSBIN = 4.5V to
VUSBIN-OUT(FLOAT) 20V. 4MΩ resistor is always connected +25℃
+25℃
5
2
OUT Float Voltage
between OUT and GND.
Switch not conducting, VOUT = 4.5V to
USBIN Float Voltage
VOUT-USBIN(FLOAT) VOUT_MAX. 2MΩ resistor is always
+25℃
2
V
connected between USBIN and GND.
Measured between USBIN and OUT when
the switch is conducting, EN_N = low.
On-Resistance
RON
+25℃
+25℃
+25℃
29
39
mΩ
Continuous Output Current
IOUT, IOTG
±5.0
1200
A
Measured from the USBIN to GND
RDIS_USBIN
during the discharge event.
OUT Discharge Resistance
Ω
Measured from the OUT to GND during
the discharge event.
RDIS_OUT
+25℃
500
VUVLO < VUSBIN < VOVP, soft-start starts
Input Debounce Time
Discharge Time
tDEB
after the debounce time (rising UVLO, +25℃
50
50
ms
ms
falling OVP); EN_N = low.
Discharge of OUT
tDIS_OUT
+25℃
+25℃
tDIS_USBIN
Discharge of USBIN
25
Valid VUSBIN which transitions to VUSBIN
OVP fast event.
>
Input Rising Disable Delay
Initialization Time of Power
tOVP-DLY
tINIT
+25℃
+25℃
80
ns
Upon USBIN or OUT crossing UVLO
150
μs
Time delay from EN_N/FLAG_N enable/
disable load switch, excluding a soft- +25℃
start.
Logic Pin Turn-On/Off Delay: EN_N,
FLAG_N
tLDELAY
100
μs
Input Capacitance
CUSBIN
COTG
COUT
ILEAK
Actual capacitance.
Actual capacitance.
Actual capacitance.
VUSBIN/VOUT = 5V.
+25℃
+25℃
+25℃
+25℃
10
200
20
1
μF
μF
μF
μA
OTG Hot Swap Capacitance
Output Capacitance
Input Leakage Current: EN_N, FLAG_N
SG Micro Corp
www.sg-micro.com
FEBRUARY 2021
4
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
ELECTRICAL CHARACTERISTICS (continued)
(VUSBIN = 5V, VOUT = 5V, CUSBIN = 1μF, COUT = 10μF, CUSB_SNS = 1μF, Full = -40℃ to +85℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP MIN
TYP MAX UNITS
ENABLE, START-UP, CLAMP FEATURES
Logic Input Threshold High Level
Logic Input Threshold Low Level
Logic Output Threshold High Level
Logic Output Threshold Low Level
VIH
VIL
EN_N, FLAG_N
Full
Full
Full
Full
1.2
1.6
V
EN_N, FLAG_N
RX_N, FLAG_N
FLAG_N
0.4
0.6
V
V
V
VOH
VOL
Open Drain Internal Pull-Up Resistance:
FLAG_N/RX_N
RPULL-UP
+25℃
500
kΩ
Open Drain Internal Pull-Down Resistance:
RX_N
RPULL-DOWN
IPULL-UP
+25℃
+25℃
+25℃
4.5
8.5
kΩ
Internal Pull-Up Current: VP
μA
USBIN = 5V, OUT from 10% to 90% of
USBIN
OUT = 5V, USBIN from 10% to 90% of
OUT
USBIN = 5V, USB_SNS from 0.5V to
4.5V, not loaded
tSS_USBIN
0.35
ms
ms
Soft-Start Time
tSS_OUT
+25℃
+25℃
0.64
0.23
tSS_USB_SNS
THERMAL
Over-Temperature Shutdown Threshold
Over-Temperature Shutdown Hysteresis
tSD
Temperature Rising.
157
21
℃
℃
tHYS
FUNCTIONAL BLOCK DIAGRAM
20V VMAX
Clamp
Ctl
USB_SNS
28V
16V
OUT
USBIN
< 5V
28V
17V
FLAG_N
EN_N
(nom)
2×500kΩ
Control
RX_N
VP
GND
Figure 1. Block Diagram
SG Micro Corp
www.sg-micro.com
FEBRUARY 2021
5
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
TYPICAL PERFORMANCE CHARACTERISTICS
At TA = +25℃, CUSBIN = 1μF, COUT = 10μF, CUSB_SNS = 1μF, unless otherwise noted.
Charging Power-Up and Power-Off in Autonomous
Mode
OTG Activate and Deactivate in Autonomous Mode
USBIN
RX_N
OUT
USBIN
RX_N
OUT
FLAG_N
USB_SNS
Time (50ms/div)
Time (10ms/div)
Charging Activate and Deactivate in Slave Mode
OTG Activate and Deactivate in Slave Mode
USBIN
OUT
USB_SNS
USBIN
OUT
USB_SNS
EN_N
EN_N
Time (50ms/div)
Time (20ms/div)
IN-GND 130V Off-State Surge Discharge Waveform
IN-GND 130V On-State Surge Discharge Waveform
CUSB_SNS = 0.1μF
CUSB_SNS = 0.1μF
USBIN
USBIN
OUT
OUT
USB_SNS
USB_SNS
IIN
IIN
Time (10μs/div)
Time (10μs/div)
SG Micro Corp
FEBRUARY 2021
www.sg-micro.com
6
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, CUSBIN = 1μF, COUT = 10μF, CUSB_SNS = 1μF, unless otherwise noted.
Normalized On-Resistance vs. Output Current
Normalized On-Resistance vs. Temperature
2
1.6
1.2
0.8
0.4
0
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
-40
-15
10
35
60
85
Output Current (A)
Temperature (℃)
Input Supply Current vs. Input Voltage
250
200
150
100
50
+85℃
+25℃
-40℃
0
0
5
10
15
20
25
30
Input Voltage (V)
SG Micro Corp
www.sg-micro.com
FEBRUARY 2021
7
28V/16V Bidirectional Load Switch
with Wireless/Dual Input Capability
SGM2541
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
FEBRUARY 2021 ‒ REV.A.2 to REV.A.3
Page
Updated Marking Information section...................................................................................................................................................................2
FEBRUARY 2019 ‒ REV.A.1 to REV.A.2
Page
Updated Absolute Maximum Ratings section.......................................................................................................................................................2
Changed Electrical Characteristics section..........................................................................................................................................................4
SEPTEMBER 2018 ‒ REV.A to REV.A.1
Page
Changed Electrical Characteristics section......................................................................................................................................................4, 5
Changes from Original (JUNE 2018) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
FEBRUARY 2021
8
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
WLCSP-2.43×1.75-20B
A1 CORNER
0.24
0.20
20 × Φ
0.4
0.4
TOP VIEW
RECOMMENDED LAND PATTERN
2.430± 0.025
20 × Φ0.260± 0.020
5
4
3
2
1
A
B
C
D
0.4
1.750± 0.025
0.040± 0.005
0.195± 0.020
0.345± 0.013
0.580± 0.038
0.4
SIDE VIEW
BOTTOM VIEW
NOTE: All linear dimensions are in millimeters.
SG Micro Corp
TX00136.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
WLCSP-2.43×1.75-20B
7″
9.2
1.90
2.71
0.81
4.0
4.0
2.0
8.0
Q2
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
©2020 ICPDF网 联系我们和版权申明