S-5814A-I4T1G [SII]
CMOS TEMPERATURE SENSOR IC; CMOS温度传感器IC型号: | S-5814A-I4T1G |
厂家: | SEIKO INSTRUMENTS INC |
描述: | CMOS TEMPERATURE SENSOR IC |
文件: | 总18页 (文件大小:184K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Rev.1.2_00
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
The S-5813A/5814A Series is a family of high-precision temperature
sensor ICs on a single chip with a linear output voltage for temperature
changes.
Each chip is composed of a temperature sensor, a constant current
circuit, and an operational amplifier.
It can be used at temperatures ranging from –40°C to 100°C. These
devices have much better linearity than other temperature sensors such
as thermistors, and can be used for a wide range of temperature control
applications.
Features
• Temperature accuracy
S-5813A Series : ±5.0°C (–30 to 100°C)
S-5814A Series : ±2.5°C (–30 to 100°C)
–11.04 mV/°C typ.
• Linear output voltage
Ta = −30°C :
Ta = +30°C :
2.582 V typ.
1.940 V typ.
Ta = +100°C : 1.145 V typ.
±0.5% typ. (–20 to 80°C)
• Nonlinearity
• Wide power supply voltage operation
• Low current consumption
• Built-in operational amplifier
• Output voltage referred to VSS
• Small package
VDD = 2.4 to 10.0 V (25°C)
4.0 μA typ. (25°C)
SNT-4A
• Lead-free products
Applications
• Compensation of high-frequency circuits such as cellular phones and radio equipment
• Compensation of oscillation frequency in crystal oscillator
• LCD contrast compensation
• Compensation of amplifier gain
• Compensation of auto focus circuits
• Temperature detection in battery management
• Overheating prevention for charged batteries or halogen lights
Package
Package Name
Drawing Code
Package
PF004-A
Tape
Reel
Land
SNT-4A
PF004-A
PF004-A
PF004-A
1
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Block Diagram
VDD
VOUT
Temperature sensor
VSS
Figure 1
2
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Product Name Structure
• The product types for the S-5813A/5814A Series can be selected at the user’s request. Please refer to “1. Product
name” for the construction of the product name and “2. Product name list” for the full product names.
1. Product name
S-581
x
A
-
I4T1
G
Package name (abbreviation) and packing specifications*1
I4T1 : SNT-4A, Tape
Product type
3 : Temperature accuracy ±5.0°C
4 : Temperature accuracy ±2.5°C
*1. Refer to the taping specifications at the end of this book.
2. Product name list
Table 1
Product Name
S-5813A-I4T1G
S-5814A-I4T1G
Temperature Accuracy
±5.0°C
Package
SNT-4A
SNT-4A
±2.5°C
3
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Pin Configuration
Table 2
SNT-4A
Top view
Pin No.
Pin Name
VSS
Pin Description
1
2
3
4
GND pin
VDD
Power supply pin
Output voltage pin
No connection
1
2
4
3
VOUT
NC*1
*1. The NC pin is electrically open.
The NC pin can be connected to VDD or VSS.
Figure 2
Absolute Maximum Ratings
Table 3
(Ta = 25°C unless otherwise specified)
Item
Power supply pin voltage
Output voltage
Symbol
VDD
Absolute Maximum Rating
Unit
VSS – 0.3 to VSS + 12.0
VSS – 0.3 to VDD + 0.3
140 (When not mounted on board)
300*1
V
VOUT
PD
V
Power dissipation
mW
mW
°C
Operating ambient temperature
Storage temperature
Topr
Tstg
–40 to +100
–40 to +125
°C
*1. When mounted on board
[Mounted board]
(1) Board size :
114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
4
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Electrical Characteristics
1. S-5813A Series
Table 4
(Ta = 25°C, VDD = 5.0 V, IOUT = 0 A unless otherwise specified)
Test
Circuit
Item
Symbol
VDD
Conditions
Min.
Typ.
Max.
Unit
Power supply voltage
−
Ta = −20 to 100°C
Ta = −30 to 100°C
Ta = −30°C
2.40
2.65
−
10.00
10.00
10.00
2.636
1.994
1.199
V
V
1
1
1
1
1
1
−
−
−
1
2
2
−
2.90
−
V
Output voltage
VOUT
2.528
1.886
1.091
2.582
1.940
1.145
V
Ta = 30°C
V
Ta = 100°C
V
Temperature sensitivity
Nonlinearity
VSE
Ta = −30 to 100°C
Ta = −20 to 80°C
−
−11.31 −11.04 −10.77
mV/°C
%
ΔNL
−
−40
−
±0.5
−
−
Operating temperature range Topr
100
8.0
0.05
1.0
°C
μA
%/V
mV
Current consumption
IDD
−
4.0
−
Line regulation
Load regulation*1
ΔVOUT1
ΔVOUT2
VDD = 2.4 to 10.0 V
IOUT = 0 to 200 μA
−
−
−
*1. Do not flow current into the output voltage pin.
2. S-5814A Series
Table 5
(Ta = 25°C, VDD = 5.0 V, IOUT = 0 A unless otherwise specified)
Test
Circuit
Item
Symbol
VDD
Conditions
Min.
Typ.
Max.
Unit
Power supply voltage
−
Ta = −20 to 100°C
Ta = −30 to 100°C
Ta = −30°C
2.40
2.65
−
10.00
10.00
10.00
2.609
1.967
1.172
V
V
1
1
1
1
1
1
−
−
−
1
2
2
−
2.90
−
V
Output voltage
VOUT
2.555
1.913
1.118
2.582
1.940
1.145
V
Ta = 30°C
V
Ta = 100°C
V
Temperature sensitivity
Nonlinearity
VSE
Ta = −30 to 100°C
Ta = −20 to 80°C
−
−11.31 −11.04 −10.77
mV/°C
%
ΔNL
−
−40
−
±0.5
−
−
Operating temperature range Topr
100
8.0
0.05
1.0
°C
μA
%/V
mV
Current consumption
Line regulation
Load regulation*1
IDD
−
4.0
−
ΔVOUT1
ΔVOUT2
VDD = 2.4 to 10.0 V
IOUT = 0 to 200 μA
−
−
−
*1. Do not flow current into the output voltage pin.
5
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Test Circuits
1.
S-5813A/5814A
VDD
VOUT
A
Series
VSS
V
V
Figure 3
2.
VDD
VOUT
S-5813A/5814A
Series
A
VSS
IOUT
V
V
Figure 4
6
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Explanation of Terms
1. Output voltage (VOUT
)
VOUT indicates the output voltage at Ta = –30°C, Ta = 30°C, and Ta = 100°C.
Output voltage (VOUT
)
Max.
Min.
−30°C
0°C
30°C
100°C
Temperature (Ta)
Figure 5
7
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
2. Temperature sensitivity (VSE)
VSE indicates the temperature coefficient of the output voltage calculated using the output voltage at Ta = −30°C and
Ta = 100°C.
VSE is calculated using the following formula.
*2
VOUT *1− VOUT
VSE =
130*3
Output voltage (VOUT
)
VOUT (at Ta = −30°C)
VSE
VOUT (at Ta = 100°C)
−30°C
0°C
30°C
100°C
Temperature (Ta)
Figure 6
*1. VOUT value at Ta = 100°C [V] .
*2. VOUT value at Ta = −30°C [V] .
*3. The difference of the temperature from Ta = 100°C to Ta = −30°C [°C] .
8
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
3. Nonlinearity (ΔNL)
ΔNL indicates the nonlinearity of the output voltage and is defined as the difference of the characteristic curve of the output
voltage and the approximation line shown below.
ΔNL is calculated using the following formula.
a*1
b*2
ΔNL =
×100
Output voltage (VOUT
)
a
VOUT (at Ta = −20°C)
a
(B) Actual measurement
of output voltage
b
a
(A) Approximation line
VOUT (at Ta = 80°C)
−20°C 0°C
80°C
Temperature (Ta)
*1. The maximum deviation of the actual measurement of output voltage (B) and an approximation line (A) in
temperature within −20°C to 80°C. The approximation line is the line drawn so that “a” should be the minimum
value.
*2. The difference of the output voltage within −20°C to 80°C.
Figure 7
4. Line regulation (ΔVOUT1
)
ΔVOUT1 indicates the output voltage dependency of the input voltage. That is, the values express how the output voltage
changes, when input voltage is changed under the condition that output current is fixed.
5. Load regulation (ΔVOUT2
)
ΔVOUT2 indicates the output voltage dependency of the output current. That is, the values express how the output
voltage changes, when output current is changed under the condition that input voltage is fixed.
9
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Precautions
• Wiring patterns for the VDD pin, VOUT pin, and VSS pin should be designed to hold low impedance.
• In this IC, if load capacitance of the VOUT pin is large, VOUT pin voltage may oscillate. It is recommended not to use the
external capacitor between the VOUT and VSS pins. When using an external capacitor, mount it near the VOUT pin.
When connecting an A/D converter etc. to the VOUT pin, the input pin capacitance of the A/D converter and the parasitic
capacitance component between wires are included as load capacitance.
To prevent oscillation, it is recommended to use the following output load condition.
Load capacitance of VOUT pin (CL) : 2.2 μF or less
VDD
VOUT
CL
S-5813A/5814A
Series
VSS
VOUT
Figure 8
Caution The above connection diagram and constant will not guarantee successful operation. Perform
through evaluation using the actual application to set the constant.
• Please do not connect a pull-up resistor to the output voltage pin.
• The application condition for input voltage, output voltage and load voltage must not exceed the package power
dissipation.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including this
IC of patents owned by a third party.
10
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Characteristics (Typical Data)
1. Output voltage (VOUT) vs. Temperature (Ta)
2. Current consumption (IDD) vs. Temperature (Ta)
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
10.0
9.0
V
V
DD = 10.0 V
DD = 5.0 V
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
V
DD = 2.4 V
−40 −20
0
20 40 60 80 100
Ta [°C
−40 −20
0
20 40 60 80 100
Ta [°C
]
]
3. Error range of each temperature
4. Current consumption (IDD) vs. Power supply voltage (VDD)
6
10
9
Approximation line:
4
2
VOUT [mV] = −11.02 [mV/°C] × Ta [°C] + 2245 [mV]
8
Ta = −40°C
Ta = 30°C
7
6
5
4
3
2
1
0
0
−2
−4
−6
Ta = 100°C
2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
−40 −20
0
20 40 60 80 100
Ta [°C
]
VDD [V]
5. Output voltage (VOUT) vs. Power supply voltage (VDD
)
Ta = −40°C
Ta = 30°C
2.684
1.941
1.940
1.939
1.938
1.937
1.936
1.935
1.934
1.933
1.932
1.931
2.683
2.682
2.681
2.680
2.679
2.678
2.677
2.676
2.675
2.674
2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
VDD [V]
V
DD [V]
Ta = 100°C
1.150
1.149
1.148
1.147
1.146
1.145
1.144
1.143
1.142
1.141
1.140
2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
VDD [V]
11
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
6. Output voltage (VOUT) vs. Load current (IOUT
)
VDD = 2.4 V
VDD = 5.0 V
3.0
2.5
2.0
1.5
1.0
0.5
0
3.0
2.5
2.0
1.5
1.0
0.5
0
Ta = −40°C
Ta = −40°C
Ta = 30°C
Ta = 100°C
Ta = 30°C
Ta = 100°C
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
IOUT [mA]
I
OUT [mA]
V
DD = 10.0 V
3.0
2.5
2.0
1.5
1.0
0.5
0
Ta = −40°C
Ta = 30°C
Ta = 100°C
0
2.0
4.0 6.0
8.0 10.0 12.0
IOUT [mA]
7. Heat response Output voltage (VOUT) vs. Time (t)
When packages are put into the air of 100
°
C from the air
When packages are put into the liquid of 100
°
C from the
of 25
°
C
air of 25°C
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
SNT-4A
SNT-4A
20
0
30 60 90 120 150 180 210 240
t [s]
0
10
30
40
50
60
t [s]
8. Start up response
Ta = 25°C, C = 100 pF, R
L
L
= 10 MΩ
Ta = 25°C, C
L
= 100 pF, R = 10 MΩ
L
V
DD
1 V / div.
GND
1 V / div.
GND
V
DD
(= 5.0 V)
(= 2.4 V)
1 V / div.
GND
1 V / div.
GND
VOUT
VOUT
t (50 μs / div.)
t (50 μs / div.)
12
Seiko Instruments Inc.
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
Rev.1.2_00
Marking Specification
SNT-4A
Top view
(1) to (3) :
Product code (refer to Product name vs. Product code)
1
2
4
3
(1) (2) (3)
Product name vs. Product code
Product Code
Product Name
(1)
(2)
R
(3)
C
D
S-5813A-I4T1G
S-5814A-I4T1G
D
D
R
13
Seiko Instruments Inc.
1.2±0.04
3
4
+0.05
-0.02
0.08
2
1
0.65
0.48±0.02
0.2±0.05
No. PF004-A-P-SD-4.0
SNT-4A-A-PKG Dimensions
PF004-A-P-SD-4.0
TITLE
No.
SCALE
UNIT
mm
Seiko Instruments Inc.
+0.1
-0
ø1.5
4.0±0.1
2.0±0.05
0.25±0.05
+0.1
ø0.5
-0
4.0±0.1
0.65±0.05
1.45±0.1
5°
2
3
1
4
Feed direction
No. PF004-A-C-SD-1.0
TITLE
SNT-4A-A-Carrier Tape
PF004-A-C-SD-1.0
No.
SCALE
UNIT
mm
Seiko Instruments Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PF004-A-R-SD-1.0
SNT-4A-A-Reel
TITLE
No.
PF004-A-R-SD-1.0
SCALE
UNIT
QTY.
5,000
mm
Seiko Instruments Inc.
0.52
1.16
0.52
0.3
0.3
0.35
Caution Making the wire pattern under the package is possible. However, note that the package
may be upraised due to the thickness made by the silk screen printing and of a solder
resist on the pattern because this package does not have the standoff.
No. PF004-A-L-SD-3.0
SNT-4A-A-Land Recommendation
TITLE
No.
PF004-A-L-SD-3.0
SCALE
UNIT
mm
Seiko Instruments Inc.
·
·
The information described herein is subject to change without notice.
Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein
whose related industrial properties, patents, or other rights belong to third parties. The application circuit
examples explain typical applications of the products, and do not guarantee the success of any specific
mass-production design.
·
·
·
When the products described herein are regulated products subject to the Wassenaar Arrangement or other
agreements, they may not be exported without authorization from the appropriate governmental authority.
Use of the information described herein for other purposes and/or reproduction or copying without the
express permission of Seiko Instruments Inc. is strictly prohibited.
The products described herein cannot be used as part of any device or equipment affecting the human
body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus
installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc.
Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the
failure or malfunction of semiconductor products may occur. The user of these products should therefore
give thorough consideration to safety design, including redundancy, fire-prevention measures, and
malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.
·
相关型号:
S-5825OHM0.01%
Fixed Resistor, Wire Wound, 4W, 825ohm, 212V, 0.01% +/-Tol, -20,20ppm/Cel, Surface Mount, 8230, CHIP, ROHS COMPLIANT
VISHAY
S-584.5OHM0.01%
Fixed Resistor, Wire Wound, 4W, 84.5ohm, 212V, 0.01% +/-Tol, -20,20ppm/Cel, Surface Mount, 8230, CHIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明