SKY66113-11_17 [SKYWORKS]
2.4 GHz Bluetooth Low Energy/802.15.4/ Thread/ZigBee Front-End Module;型号: | SKY66113-11_17 |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | 2.4 GHz Bluetooth Low Energy/802.15.4/ Thread/ZigBee Front-End Module |
文件: | 总9页 (文件大小:432K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
SKY66113-11: 2.4 GHz Bluetooth® Low Energy/802.15.4/
Thread/ZigBee® Front-End Module
Applications
In-home appliances
Smart thermostats
Sensors
Logic
Control
Beacons
Bypass
Gateways
Wearable devices
ANT
RFIN
Features
Integrated LNA with 12 dB gain
LNA
Integrated switch with receive LNA and transmit bypass
203670-001
function
Figure 1. SKY66113-11 Block Diagram
Low noise figure: 2 dB typical
Single-ended transmit/receive interface
Fast switch on/off time: < 2 μs
Supply range: 1.7 V to 3.6 V
Description
The SKY66113-11 is a high-performance, fully integrated RF
front-end module (FEM) designed for Bluetooth Low
Energy/Bluetooth Smart, 802.15.4, Thread, and ZigBee
applications.
Sleep mode current: < 1 μA typical
No external bias resistor is required
The SKY66113-11 is designed for ease of use and maximum
flexibility. The device integrates a high-gain, low-noise LNA,
transmit bypass path, and digital controls compatible with 1.6 V to
3.6 V CMOS levels.
Small MCM (16-pin, 2.4 × 2.4 × 0.8 mm) package, NiPdAu-
plated (MSL3, 260 °C per JEDEC-J-STD-020)
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
The RF blocks operate over a wide supply voltage range from
1.7 V to 3.6 V that allows the SKY66113-11 to be used in battery
powered applications over a wide spectrum of the battery
discharge curve.
A functional block diagram is shown in Figure 1. The
SKY66113-11 is provided in a small, 16-pin, 2.4 × 2.4 mm
Multi-Chip Module (MCM) package. The pin configuration and
package are shown in Figure 2. Signal pin assignments and
functional pin descriptions are provided in Table 1.
GND
VDD
GND
DNC
GND
1
2
16
15
14
13
12
11
10
9
GND
N/C
3
4
N/C
RFIN
GND
5
6
7
8
203670-002
Figure 2. SKY66113-11 Pinout
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203670F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 10, 2017
1
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
Table 1. SKY66113-11 Signal Descriptions1
Pin
1
Name
GND
Description
Pin
9
Name
GND
Description
Ground
Ground
2
N/C
Not connected internally
Not connected internally
RF input power
10
11
12
13
14
15
16
DNC
GND
VDD
GND
DNC
N/C
Do not connect
Ground
3
N/C
4
RFIN
GND
CRX
CSD
ANT
Connect to positive supply
Ground
5
Ground
6
Connect to GPIO signal for mode control
Connect to GPIO signal for mode control
Connect to 50 antenna
Do not connect
7
Not connected internally
Connect to positive supply
8
VCC1
1
The paddle should be connected to ground.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY66113-11 are provided
in Table 2. The recommended operating conditions are specified
in Table 3.
Electrical specifications are provided in Tables 4 and 5. The state
of the SKY66113-11 is determined by the logic provided in
Table 6.
Table 2. SKY66113-11 Absolute Maximum Ratings1
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
VCC1
VDD
–0.3
–0.3
+3.6
+3.6
V
V
Control pin voltages
VCTL
–0.3
+3.6
+20
+15
+20
+85
+85
V
Input power at RFIN port
Receive input power at ANT port
Bypass input power at ANT port
Operating temperature
PIN_TR_MAX
PIN_RX_MAX
PIN_BYP_MAX
TA
dBm
dBm
dBm
C
–40
–40
Storage temperature
TSTG
C
Electrostatic discharge:
ESD
Human Body Model (HBM), Class 1C
1500
V
1
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 3. Recommended Operating Conditions
Parameter
Supply voltage on VCC1 pin
Supply voltage on VDD pin
Operating temperature
Symbol
Min
1.7
Typ
3.0
Max
3.6
Units
VCC1
VDD
TA
V
V
1.7
3.0
3.6
–40
+25
+85
C
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 10, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203670F
2
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
Table 4. SKY66113-11 Electrical Specifications1
(VCC1 = VDD = 3.0 V, TA = +25 C, Unless Otherwise Noted)
Parameter Symbol
Test Condition
Min
Typ
Max
Units
DC Characteristics
Total Rx mode supply current
Total bypass mode supply current
Total sleep mode supply current
ICC_RX
4
6
1
mA
μA
μA
ICC_BYP
ICC_OFF
25
No RF
Logic Characteristics
Control voltage:
High
Low
VIH
VIL
1.6
0
VDD
0.3
V
V
Control current:
High
Low
IIH
IIL
1.0
1.0
μA
μA
1
Performance is guaranteed only under the conditions listed in this table.
Table 5. SKY66113-11 Electrical Specifications1
(VCC1 = 1.8 or 3.0 V, VDD = 3.0 V, TA = +25 C, All Unused Ports Terminated with 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typ
Max
Units
Receive Characteristics
Frequency range
f
2400
2483
MHz
dB
Receive gain
Gain_RX
NF
12
2
Receive noise figure
Third order input intercept point
1 dB input compression point
Input return loss
dB
IIP3
0
dBm
dBm
dB
IP1dB
S11
–12
–8
–10
–10
ANT1 or ANT2 ports
Output return loss
S22
dB
Turn-on time
tRISE
From 50% of CRX edge to 90% of
final RF output power
0.8
0.8
2
2
μs
μs
Turn-off time
tFALL
From 50% of CRX edge to 10% of
final RF output power
Bypass Characteristics
Frequency range
Bypass gain
f
2400
2483
MHz
dB
Gain_BYP
S11
–1.5
–10
–10
Input return loss
Output return loss
dB
S22
dB
1
Performance is guaranteed only under the conditions listed in this table.
Table 6. SKY66113-11 Mode Control Logic1
Mode
Description
All off (sleep mode) (Note 1)
Receive LNA mode
CSD (Pin 7)
CRX (Pin 6)
0
1
2
0
1
1
1
0
Transmit bypass mode
1
All controls must be at logic “0” to achieve the specified sleep current.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203670F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 10, 2017
3
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
Application Schematic Description
Package and Handling Information
A reference design schematic is provided in Figure 3. An
Evaluation Board schematic diagram is shown in Figure 4. A
photograph of the Evaluation Board is shown in Figure 5. Table 7
provides the Bill of Materials (BOM) list for Evaluation Board
components.
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The SKY66113-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design and SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Package Dimensions
The PCB layout footprint for the SKY66113-11 is provided in
Figure 6. The typical part marking is shown in Figure 7. Package
dimensions are shown in Figure 8, and tape and reel dimensions
are provided in Figure 9.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
VCC1
C3
1 nF
C14
4.7 uF
C2
13 pF
1
13
GND
GND
12
11
10
VDD
2
3
4
X
X
N/C
N/C
RFIN
VDD
GND
DNC
U1
C8
C9
13 pF
SKY66113-11
J1
0.1 uF
X
RFin
5
9
GND
SMA
GND
203670-003
CRX
CSD
J2
ANT
SMA
Figure 3. SKY66113-11 Reference Design Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 10, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203670F
4
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
VCC1
C3
1 nF
C2
13 pF
C14
4.7 uF
J3
1
2
4
VCC1
3
1
13
5
GND
6
GND
7
8
9
10
12
14
16
18
11
13
15
17
2
3
4
12
11
10
VDD
X
X
N/C
N/C
RFIN
VDD
GND
DNC
C9
13 pF
C8
0.1 uF
U1
CRX
CSD
VDD
X
19 20
21 22
23
J1
24
5
9
RFIN
GND
GND
Header 12X2
SMA
R6
1 kΩ
CRX
CSD
C12
10 pF
R4
1 kΩ
J2
ANT
C10
10 pF
203670-004
SMA
Figure 4. SKY66113-11 Evaluation Board Schematic Diagram
Figure 5. SKY66113-11 Evaluation Board
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203670F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 10, 2017
5
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
Table 7. SKY66113-11 Evaluation Board Bill of Materials (BOM)
Component
C2, C9
C3
Value
13 pF
Manufacturer
Murata
Mfr Part Number
Package
Description
GRM1555C1H130JA01D 0402
Ceramic capacitor, 13 pF, 5%, C0G, 50 V, 0402
Ceramic capacitor, 1000 pF, 10%, X7R, 50 V, 0402
Ceramic capacitor, 0.1 uF, 10%, X7R, 16 V, 0402
Ceramic capacitor, 10 pF, 2%, C0G, 50 V, 0402
Ceramic capacitor, 4.7 uF, 20%, X5R, 10 V, 0402
Resistor, 1000 ohm, 5%, 0.063 W, 0402
SMA end launch straight jack receptacle
100 mil header
1 nF
Various
Various
0402
C8
0.1 uF
10 pF
4.7 uF
1 kΩ
Various
Various
0402
C10, C12
C14
Various
Various
0402
Various
Various
0402
R6 R4
J1 J2
J3
Various
Various
0402
Johnson Components
Samtec
142-0701-851
TSW-112-07-G-D
End launch
100 mil
2.7 mm
Pin 16
10X 0.45 mm
10X 0.45 mm
Pin 1
Pin 1 Indicator
0.20 x 45°
2.7 mm
1 mm
12X 0.2 mm
Pitch 0.5 mm
Package Outline
Stencil aperture size for
center ground pad should be 80% to 100%
(by area) of the solder mask opening
1 mm
Stencil Aperture
2.7 mm
2.8 mm
Pin 16
Pin 1
Pin 1 Indicator
0.20 x 45°
Pin 16
10X 0.55 mm
10X 0.55 mm
5X 0.45 mm
6X 0.45 mm
Pin 1
Thermal via array
ø0.3 mm on 0.6 mm pitch
improves thermal performance
2.8 mm
Pitch 0.6 mm
2.7 mm
11X 0.2 mm
12X 0.3 mm
2X 0.5 mm
Pitch 0.5 mm
Package Outline
Pitch 0.5 mm
Package Outline
Pitch 0.6 mm
Opening size of 60% to 100%
of the exposed center opening shown
2X 0.5 mm
0.25 mm Typ
Solder Mask Opening
Metallization
Notes:
1. All dimensions are in millimeters, unless otherwise specified.
2. Thermal vias should be resin filled and capped in accordance with IPC-4761Type VII vias.
Recommended Cu thickness is 30 to 35 µm.
203670-006
Figure 6. SKY66113-11 PCB Layout Footprint
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 10, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203670F
6
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
Pin 1
Indicator
Skyworks Part Number
6113
Date Code:
YY = Calendar Year
YYWW
WW = Week
203670-007
Figure 7. SKY66113-11 Typical Part Marking
(Top View)
Pin 16
16X SMT Pad
A B C
B
C
2.4
Pin 1 Indicator
0.1
A
Top
4X 0.5
Pin 1
Pin 1
Indicator
2.4
0
B
10X 1.1
Solder Mask Openings
0.2 A B C
A
0.7 0.1
See Detail C
0.1
0.075 A B C
Bottom View
Top View
Side View
0.2 0.1
(0.1)
5X R0.05 Max
0.2 0.05
(0.1)
0.3 x 45°
(0.05)
0.2 0.1
0.3 0.05
0.2 0.1
1
(0.1)
Solder Mask Edges
0.3 0.05
Metal Pad Edge
Metal Pad Edge
1
Detail C
1X Scale
1X This Rotation
Detail A
2X Scale
3X This Rotation
3X Rotated 180°
3X Rotated 90° CW
3X Rotated 90° CCW
Detail B
2X Scale
1X This Rotation
1X Rotated 180°
1X Rotated 90° CW
1X Rotated 90° CCW
Notes:
1. All measurements are in millimeters.
2. Dimensions and tolerances according to ASME Y14.5M-1994.
203670-008
Figure 8. SKY66113-11 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203670F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 10, 2017
7
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
B
4.00 0.10
2.00 0.05
0.25 0.05
1.00 0.10 (Ko)
A
A
Pin 1
B
4.00 0.10
Detail B
2.70 0.10 (Ao)
Notes:
1. Carrier tape must meet all requirements of Skyworks GP01-D232.
procurement spec for tape and reel shipping.
2. Carrier tape shall be black conductive polystyrene.
3. Cover tape shall be transparent conductive material.
4. ESD-surface resistivity shall meet Skyworks GP01-D232.
5. 10-sprocket hole pitch cumulative tolerance: 0.20 mm.
6. Ao and Bo measured on plane 0.30 mm above the bottom of the pocket.
7. All measurements are in millimeters.
Detail A
203670-009
Figure 9. SKY66113-11 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 10, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203670F
8
DATA SHEET • SKY66113-11: BLUETOOTH LOW ENERGY/802.15.4/THREAD/ZIGBEE FEM
Ordering Information
Model Name
T
Evaluation Board Part Number
SKY66113-11: 2.4 GHz Bluetooth Low Energy/802.15.4/Thread/ZigBee FEM
SKY66113-11
SKY66113-11EK1
Copyright © 2015-2017 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203670F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 10, 2017
9
相关型号:
©2020 ICPDF网 联系我们和版权申明