C-13-622-T-SFC-G5 [SOURCE]
622 Mbps Single Mode Transceiver; 622 Mbps的单模收发器
| 型号： | C-13-622-T-SFC-G5 |
| 厂家： | 
SOURCE PHOTONICS, INC. |
| 描述： | 622 Mbps Single Mode Transceiver |
| 文件： | 总7页 (文件大小：618K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Features
• FC Duplex Single Mode Transceiver
• Industry Standard 1x9 Footprint
• Complies with SONET OC-12 SDH STM-4
• Single +3.3V/+5V Power Supply
• OperatingTemperature Range: 0 to 70ºC
• LVPECL/PECL Differential Inputs and Outputs
• LVPECL/PECL Signal Detection Output
• Wave Solderable and Aqueous Washable
• Uncooled laser diode with MQW structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• SONET OC-12 Application
• RoHS compliance available
Absolute Maximum Rating
Parameter
Symbol
Vcc
Min.
0
Max.
3.6
6
Unit
V
Note
Power Supply Voltage
Power Supply Voltage
Output Current
C-13-622-T3-SFC
C-13-622-T-SFC
Vcc
0
V
Iout
0
30
mA
ºC
Soldering Temperature
Storage Temperature
-
260
85
10 seconds on leads only
-
Tstg
-40
ºC
Recommended Operating Condition
Parameter
Symbol
Min.
Typ.
Max.
Unit
Note
Power Supply Voltage
Vcc
Vcc
Topr
-
3.1
4.75
0
3.3
3.5
5.25
70
V
C-13-622-T3-SFC
Power Supply Voltage
Operating Temperature (Case)
Data Rate
5
-
V
C-13-622-T-SFC
ºC
-
622
-
Mbps
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical
Po
Po
-15
-3
-
-8
+2
dBm
dBm
nm
C-13-622-T(3)-SFC
C-13-622-T(3)-SFC4
Optical Transmit Power
Optical Transmit Power
Output center Wavelength
Output Spectrum Width
Extinction Ratio
-
λp
1274
-
1310
1356
2.5
-
∆λrms
ER
-
-
nm
RMS(σ)
8.2
dB
Output Eye
Compliant with ITU-T G.957/STM-4 Eye Mask
Optical Rise Time
tr
tf
-
-
-
-
-
-
1.2
1.2
ns
ns
10% to 90% Values
10% to 90% Values
Optical Fall Time
Relative Intensity Noise
RIN
-120
dB/Hz
Measured with 223-1 PRBS with 72 ones and
72 zeros.
Total Jitter
TJ
-
-
0.55
ns
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
1
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Electrical
Maximum current is specified at Vcc=
Maximum @ maximum temperature
ICC
IIL
-
-
180
mA
Power Supply Current
Data Input Current-Low
Data Input Current-High
Differential Input Voltage
Data Input Voltage-Low
Data Input Voltage-High
-350
-
-
-
-
-
-
-
µA
µA
mV
V
I
350
-
IH
V -VIL
IH
300
-2.0
-1.1
VIL-VCC
VIH-VCC
-1.58
-0.74
These inputs are compatible with 10K, 10KH
and 100K ECL and PECL inputs
V
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical
Sensitivity
-10
-
-
-3
-
-
-
-
-
-
-28
dBm
dBm
dBm
dBm
dB
Measured with 223-1 PRBS,BER= 10
Maximum Input Power
Signal Detect-Asserted
Signal Detect-Deasserted
Signal Detect-Hysteresis
Wavelength of Operation
Pin
Pa
Pd
-
-28
-
-
Measured on transition: low to high
Measured on transition: high to low
-40
1
5
1100
1600
nm
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Note
Electrical
ICC
-
-
100
mA
The current excludes the output load current
Power Supply Current
Data output Voltage-Low
Data Output Voltage-High
VOL -Vcc
-2
-
-
-
-
-1.58
-0.74
-1.58
-0.74
V
V
V
V
VOH-
-1.1
-2.0
-1.1
Vcc
These outputs are compatible with 10K,
10KH and 100KECL and PECL outputs
Signal Detect Output Voltage-Low VSDL-Vcc
Signal Detect Output Voltage-High Vcc
VSDH-
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
2
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Connection Diagram
Receiver Signal Ground
Receiver Data Out
1. (Rx GND)
2. (Rx +)
3. (Rx-)
NC
Receiver Data Out Bar
Signal Detect
4. (SD)
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
5. (Rx Vcc)
6. (Tx Vcc)
7. (TX-)
8. (TX+)
9. (Tx GND)
Top View
NC
Transmitter Signal Ground
PIN
Symbol
RxGND
RD+
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
1
2
3
4
5
6
7
RD-
See recommended circuit schematic
SD
Active high on this indicates a received optical signal
DC power for the receiver section
RxVcc
TxVcc
TD-
DC power for the transmitter section
See recommended circuit schematic
8
TD+
See recommended circuit schematic
9
TxGND
Directly connect this pin to the transmitter ground plane
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
3
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Recommended Circuit Schematic
C-13-622-T(3)-SFC
Tx Vcc
Rx Vcc
9
8
7
6 5 4 3 2
1
C6
C5
R1 R3
R9
R5 R7
RD +
RD -
SD
TD +
TD -
Tx Vcc
Rx Vcc
R2 R4
R10 R6 R8
No internal
connection
No internal
connection
Transceiver
Top view
L1
Rx Vcc
Tx Vcc
C3
L2
C1
C2
Notes +3.3V:
Notes +5V:
Vcc
R1=R3=R5=R7=R9=130
R2=R4=R6=R8=R10=82
C1=C2=C3=C5=C6=0.1F
C4=10F
R1=R3=R5=R7=R9=82
R2=R4=R6=R8=R10=130
C1=C2=C3=C5=C6=0.1F
C4=10F
C4
L1=L2=1H
L1=L2=1H
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
4
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Package Diagram
Top View
Front View
Units: mm
Rear View
Side View
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
5
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Ordering Information
Available Options:ꢀ
C-13-622-T3-SFC
C-13-622-T-SFC
C-13-622-T3-SFC4
C-13-622-T-SFC4
C-13-622-T3-SFC4-G5
C-13-622-T-SFC4-G5
C-13-622-T3-SFC-G5
C-13-622-T-SFC-G5
Part unmbering Definition:
C - 13 - 622 - T(3) - S FC Tx Power -RoHS
• Wavelength
13= 1310 nm
• Communication protocol
(622 Mbps)
• T3 = +3.3V Transceiver, FP
T = +5V Transceiver, FP
• Single mode fiber
• Connector options
• Tx Power range
Blank = -15 to -8 dBm
4 = -3 to +2 dBm
• Ordering Information
Blank = RoHS non-compliant product
G5 = RoHS 5/6-compliant product (lead exemption)
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
6
622 Mbps Single Mode Transceiver
C-13-622-T(3)-SFC
Warnings:
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notes:
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance
of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are
given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warran-
ties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of
Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual
property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes
no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this docu-
ment are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact
LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2003
All rights reserved
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS802-Oct1606
Rev. A.2
7
相关型号：
C-13-622-T-SSC
Transceiver, 1274nm Min, 1356nm Max, 622Mbps(Tx), 622Mbps(Rx), SC Connector, Through Hole Mount
SOURCE
C-13-622-T-SSC-G5
Transceiver, 1274nm Min, 1356nm Max, 622Mbps(Tx), 622Mbps(Rx), SC Connector, Through Hole Mount, 10.40 MM HEIGHT, PACKAGE-9
SOURCE
©2020 ICPDF网 联系我们和版权申明