DSL05-016SC6 [STMICROELECTRONICS]
低电容TVS，用于VDSL2和G.FAST;
| 型号： | DSL05-016SC6 |
| 厂家： | 
ST |
| 描述： | 低电容TVS，用于VDSL2和G.FAST 电视 |
| 文件： | 总10页 (文件大小：590K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DSL05
Secondary protection for VDSL2 and G.FAST lines
Datasheet - production data
Description
DSL05 is designed to protect DSL line drivers
against surges defined in worldwide
telecommunication standards. This device
protects line drivers of various systems such as
xDSL and G.FAST. The low capacitance makes it
suitable from ADSL to G.FAST data rates.
DSL05 is able to survive severe conditions even
when used with downgraded or oscillating gas
tube.
SOT23-6L
This device is packaged in a SOT23-6L.
Figure 1: Functional diagram
Features
High surge capability to comply with GR-
1089 and ITU-T K20/21/45
Keeps peak power capability at high
temperature
I/O1
-VLD
I/O2
NC
Voltages: 8, 12 and 24 V
Low capacitance device: Ctyp = 0.95 pF
RoHS package
+VLD
NC
Low leakage current: 50 nA at 25 °C
Complies with the following standards
Refer to Figure 7 and Figure 8.
Telcordia GR-1089
Table 1: Device summary
2.5 kV 2/10 μs - 500 A 2/10 μs
AC power fault tests
Order code
VRM(V)
ITU-T K20/21/45
DSL05-008SC6
DSL05-012SC6
DSL05-024SC6
8
6 kV 10/700 μs - 150 A 5/310 μs
power induction and contact tests
12
24
IEC 61000-4-2, level 4
15 kV (air discharge)
8 kV (contact discharge)
IEC 61000-4-5, level 2
1 kV, 42 Ω
MIL STD 883G-Method 3015-7: Class 3
8 kV (human body model)
October 2016
DocID029116 Rev 2
1/10
www.st.com
This is information on a product in full production.
Characteristics
DSL05
1
Characteristics
Table 2: Absolute ratings (Tamb = -40 to 85 °C)
Symbol
Ipp
Parameter
Value
30
Unit
A
Peak pulse current
8/20μs
dl/dt
Tstg
Tj
Critical rate of on-state current rise
1000
A/µs
Storage junction temperature range
-55 to +150
260
°C
°C
Maximum operating junction temperature
Maximum temperature for soldering during 10 s
TL
Table 3: Electrical characteristics (Tamb = 25 °C, pin 1 to pin 3)
IRM at VRM
Typ. Max. Typ. Max.
Tamb = 85 °C
VBR at 1 mA
Min.
VBO
IH
C(1)
ΔC(2)
Max. Typ. Max. Typ.
Order code
nA
V
8
V
V
mA
50
pF
1.5
1.5
1.5
pF
DSL05-008SC6
DSL05-012SC6
DSL05-024SC6
3
3
100
100
50
10
10
7
200
200
100
9.5
15
18
31
0.25
0.25
0.25
12
24
12.8
25.5
50
0.1
50
Notes:
(1)Test conditions: VR = 2 V bias, VRMS = 1 V, f = 1 MHz
(2)Measured between 1 V and VRM
Figure 2: Electrical characteristics definitions
2/10
DocID029116 Rev 2
DSL05
Characteristics
1.1
Characteristics (curves)
Figure 3: Peak pulse power dissipation versus
initial junction temperature (maximum values)
Figure 4: Leakage current versus junction
temperature
I
(nA)
I
(A)
R
PP
10000
1000
100
10
50
40
30
20
10
0
8/20 µs
DSL05-008SC6
DSL05-024SC6
1
0.1
T (°C)
j
T (°C)
j
0.01
0
25
50
75
100
125
150
0
25
50
75
100
125
150
175
Figure 5: Junction capacitance versus reverse
voltage
Figure 6: Junction capacitance versus junction
temperature
C(pF)
C(pF)
3
2.5
2
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
T
V
V
= 25 °C
V
= 1 V
osc
V = 2 V
R
j
= 1 V
osc
R
< V
I/O to I/O
RM
I/O to I/O
1.5
1
0.5
0
T (°C)
V
(V)
R
j
0
25
50
75
100
125
150
0
2
4
6
8
10
12
14
16
18
20
22
24
Figure 7: Clamping response to 8/20 µs surge (Ipp = 10 A)
DocID029116 Rev 2
3/10
Schematics
DSL05
2
Schematics
Figure 8: xDSL and G.FAST schematic for CPE applications
VLD+
VLD-
VLD+
VLD-
Figure 9: xDSL and G.FAST schematic for infrastructure applications
VLD+
VLD-
VLD+
VLD-
4/10
DocID029116 Rev 2
DSL05
Package information
3
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Epoxy meets UL 94,V0
Lead-free package
3.1
SOT23-6L package information
Figure 10: SOT23-6L package outline
Table 4: SOT23-6L package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches
Min.
0.9
0
Max.
1.45
0.15
1.3
Min.
0.0354
0
Typ.
Max.
A
A1
A2
b
0.0571
0.0059
0.0512
0.0197
0.0079
0.1201
0.0689
0.9
0.30
0.09
2.8
1.5
0.0354
0.0118
0.0035
0.1102
0.0591
0.5
c
0.2
D
E
3.05
1.75
e
0.95
0.0374
H
L
2.6
0.3
0
3
0.1024
0.0118
0
0.1181
0.0236
0.3937
0.6
10
θ
DocID029116 Rev 2
5/10
Package information
DSL05
Figure 11: Footprint recommendations,
Figure 12: Marking layout (refer to ordering
information table for marking)
dimensions in mm (inches)
Figure 13: Package orientation in reel
Figure 15: Reel dimensions (mm)
Figure 14: Tape and reel orientation
Figure 16: Inner box dimensions (mm)
6/10
DocID029116 Rev 2
DSL05
Package information
Figure 17: Tape and reel outline
Table 5: Tape and reel mechanical data
Dimensions
Ref.
Millimeters
Min.
3.9
Typ.
4
Max.
4.1
P1
P0
D0
D1
F
3.9
4
4.1
1.45
1
1.5
1.6
3.45
1.3
3.5
1.4
2
3.55
1.6
K0
P2
W
1.95
7.9
2.05
8.3
8
DocID029116 Rev 2
7/10
Package information
DSL05
Figure 18: ST ECOPACK® recommended soldering reflow profile for PCB mounting
Minimize air convection currents in the reflow oven to avoid component
movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-
STD-020.
8/10
DocID029116 Rev 2
DSL05
Ordering information
4
Ordering information
Figure 19: Ordering information scheme
DSL 0x - vvv SC6
DSL protection
Version
Stand-off voltage
024 = 24 V
Package
SC6 = SOT23-6L
Table 6: Ordering information
Order code
Marking
D508
Package
Weight
Base qty.
Delivery mode
DSL05-008SC6
DSL05-012SC6
DSL05-024SC6
D512
SOT23-6L
14 g
3000
Tape and reel
D524
5
Revision history
Table 7: Document revision history
Date
Revision Changes
05-Jul-2016
1
2
Initial release.
Updated Table 3: "Electrical characteristics (Tamb = 25 °C,
pin 1 to pin 3)".
03-Oct-2016
DocID029116 Rev 2
9/10
DSL05
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved
10/10
DocID029116 Rev 2
相关型号：
©2020 ICPDF网 联系我们和版权申明