STEVAL-ISA009V1 [STMICROELECTRONICS]

VIPer53-E single output reference design board with 90 to 264 VAC input and 24 W output; VIPer53 -E单路输出的参考设计板90到264 VAC输入和24瓦的输出
STEVAL-ISA009V1
型号: STEVAL-ISA009V1
厂家: ST    ST
描述:

VIPer53-E single output reference design board with 90 to 264 VAC input and 24 W output
VIPer53 -E单路输出的参考设计板90到264 VAC输入和24瓦的输出

文件: 总4页 (文件大小:83K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
STEVAL-ISA009V1  
VIPer53-E single output reference design board  
with 90 to 264 VAC input and 24 W output  
Data Brief  
Features  
Switch-mode general-purpose power supply  
Current mode control with adjustable limitation  
75% efficiency  
Output short-circuit and overload protection  
Thermal shutdown protection  
Meets EN55022 class B EMI specification  
Blue Angel compliant  
STEVAL-ISA009V1  
Description  
This reference design board is an offline wide-  
range power supply that incorporates the  
VIPer53-E, and is set up for secondary regulation  
by driving the PWM controller through an  
optocoupler. The switching frequency is set at 100  
kHz and the total output power is 24 W.  
December 2007  
Rev 1  
1/4  
For further information contact your local STMicroelectronics sales office.  
www.st.com  
4
Board schematic  
STEVAL-ISA009V1  
1
Board schematic  
Figure 1.  
Schematic  
1
4
2
3
1
2
2/4  
STEVAL-ISA009V1  
Revision history  
2
Revision history  
Table 1.  
Date  
28-Nov-2007  
Document revision history  
Revision  
Changes  
1
Initial release  
3/4  
STEVAL-ISA009V1  
Please Read Carefully:  
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the  
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any  
time, without notice.  
All ST products are sold pursuant to ST’s terms and conditions of sale.  
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no  
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this  
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products  
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such  
third party products or services or any intellectual property contained therein.  
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED  
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS  
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.  
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT  
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING  
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,  
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE  
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.  
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void  
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any  
liability of ST.  
ST and the ST logo are trademarks or registered trademarks of ST in various countries.  
Information in this document supersedes and replaces all information previously supplied.  
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.  
© 2007 STMicroelectronics - All rights reserved  
STMicroelectronics group of companies  
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -  
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America  
www.st.com  
4/4  

相关型号:

STEVAL-ISA010V1

Ultra wide range dual output back converter demonstration board based on the VIPER16
STMICROELECTR

STEVAL-ISA011V1

VIPER12ADIP-E low power AC/DC adapter demonstration board (suitable for the STEVAL-ILL002V1)
STMICROELECTR

STEVAL-ISA012V1

3 phase power supply with VIPer and Power MOSFETs
STMICROELECTR

STEVAL-ISA014V1

VIPer12A travel adaptor 3.6W output
STMICROELECTR

STEVAL-ISA019V3

80 W ESBT quasi-resonant wide-range SMPS demonstration board based on the L6565 for 3-phase applications
STMICROELECTR

STEVAL-ISA020V1

3.5 W battery charger demonstration board based on the VIPer12AS-E and TSM101
STMICROELECTR

STEVAL-ISA023V2

Flyback AC-DC converter evaluation board based on the VIPer53-E with 24 W negative output
STMICROELECTR

STEVAL-ISA024V1

20 A step-down DC-DC converter demonstration board with 3.3 Vout and 250 kHz switching frequency, based on the L6725
STMICROELECTR

STEVAL-ISA029V1

Compact power supply for DVD/set top box evaluation board with three Vout (-30 V, 3.3 V, 12 V)
STMICROELECTR

STEVAL-ISA032V1

60 W forward converter demonstration board for fiscal cash register based on the L5991 and STP10NK60Z
STMICROELECTR

STEVAL-ISA033V1

55 W flyback SMPS demonstration board for alarm system based on the L5991 and STP12NK80Z
STMICROELECTR

STEVAL-ISA034V1

10 W 3-phase auxiliary power supply based on the L6565 and STW3N150
STMICROELECTR