首页 |元器件品牌

TCM0605S-120-2P-T [TDK]

Data Line Filter, 2 Function(s), 10V, 0.1A, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-4;
TCM0605S-120-2P-T
型号： TCM0605S-120-2P-T
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

Data Line Filter, 2 Function(s), 10V, 0.1A, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-4

LTE
文件： 总14页 (文件大小：132K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
E M C C o m p o n e n t s  
July 2013  
Common Mode Filters  
For ultra high-speed differential signal line  
(HDMI, DVI, DisplayPort, USB3.0, etc.)  
TCM-S series  
TCM0403S  
TCM0605S  
TCM0806S  
[0201 inch]*  
[0202 inch]  
[0302 inch]  
* Dimensions Code JIS[EIA]  
(2/14)  
E M C C o m p o n e n t s  
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 20 to 70% RH or  
less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.)  
(3) Medical equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
001-01 / 20130723 / e9712_tcm.
(3/14)  
E M C C o m p o n e n t s  
Product compatible with RoHS directive  
Halogen-free  
Common Mode Filters  
For ultra high-speed differential signal line  
Compatible with lead-free solders  
(HDMI, DVI, DisplayPort, USB3.0, etc.)  
Overview of the TCM-S Series  
FEATURES  
This product is a thin-film common mode filter with a wide frequency range that can be used for high-speed differential signal interfaces  
such as USB3.0 and DisplayPort.  
Has EMC suppression by achieving wide frequency range (6GHz and higher) differential mode transmission while ensuring common  
mode impedance with virtually no affect on the high-speed differential transmission line signal.  
Lineup includes 0403 (L0.45×W0.30×T0.23mm), the industry's smallest thin-film common mode filter.  
APPLICATION  
Noise countermeasure for ultra-high-speed differential interfaces (HDMI, DVI, DisplayPort, USB3.0, etc.) for mobile devices and general  
consumer products such as smart phones, tablets, digital cameras, and portable music players.  
PART NUMBER CONSTRUCTION  
TCM  
0403  
S
-
350  
-
2P  
-
T
□□□  
Internal  
code  
L×W×T Dimensions  
(mm)  
Impedance  
(ꢂ) at 100MHz  
Product internal  
Series name  
Number of lines  
Packaging style  
code  
0403 0.45×0.3×0.23  
S
120  
350  
12  
35  
2P  
2 lines  
T
Taping  
0605  
0.65×0.5×0.3  
0806 0.85×0.65×0.4  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature range  
Package quantity  
Individual weight  
Operating  
temperature  
Storage  
temperature  
Type  
ꢀ
（°C）  
（°C）  
（pieces/reel）  
10,000  
（mg）  
0.2  
0.5  
TCM0403S  
TCM0605S  
TCM0806S  
–25 to +85  
–25 to +85  
–25 to +85  
–25 to +85  
–25 to +85  
–25 to +85  
10,000  
10,000  
1.0  
ꢀꢁ  
The Storage temperature range is for after the circuit board is mounted.  
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(4/14)  
E M C C o m p o n e n t s  
Overview of the TCM-S Series  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
60 to 120s  
Time  
t2  
10 to 30s  
Time  
t3  
5s max.  
T2  
180°C  
150°C  
230°C  
245°C  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(5/14)  
E M C C o m p o n e n t s  
TCM-S series  
TCM0403S Type  
SHAPE & DIMENSIONS  
0.30 0.02  
1
4
2
3
Dimensions in mm  
0.075 0.03  
RECOMMENDED LAND PATTERN  
CIRCUIT DIAGRAM  
0.45  
1
2
4
3
• No polarity  
0.15  
0.15  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(6/14)  
E M C C o m p o n e n t s  
TCM-S seriesꢀ  
TCM0403S Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Common mode  
DC resistance  
(ꢂ)  
Cutoff  
Insulation  
resistance  
(Mꢂ)min.  
impedance  
[at 100MHz]  
(ꢂ)  
Rated current  
(A)max.  
Rated voltage  
(V)max.  
frequency  
(GHz)typ.  
Part No.  
[1 line]  
Tolerance  
35  
12ꢂ  
3.0 30%  
7.0  
0.05  
5
10  
TCM0403S-350-2P-T□□□  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
Common mode impedance  
DC resistance  
Insulation resistance  
4291A  
4338A  
4339A  
Agilent Technologies  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(7/14)  
E M C C o m p o n e n t s  
TCM-S seriesꢀ  
TCM0403SType  
ELECTRICAL CHARACTERISTICS  
IMPEDANCE VS. FREQUENCY CHARACTERISTICS  
10000  
1000  
100  
10  
350 Common mode  
350 Differential mode  
1
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4991A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS  
0
350 Differential mode  
5
10  
15  
20  
25  
30  
35  
40  
350 Common mode  
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
E5071B  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(8/14)  
E M C C o m p o n e n t s  
TCM-S series  
TCM0605S Type  
SHAPE & DIMENSIONS  
0.50 0.05  
1
4
2
3
Dimensions in mm  
0.15 0.05  
RECOMMENDED LAND PATTERN  
CIRCUIT DIAGRAM  
0.8  
1
2
4
3
• No polarity  
0.3  
0.2  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(9/14)  
E M C C o m p o n e n t s  
TCM-S seriesꢀ  
TCM0605S Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Common mode  
DC resistance  
(ꢂ)max.  
Cutoff  
Insulation  
resistance  
(Mꢂ)min.  
impedance  
[at 100MHz]  
(ꢂ)  
12  
Rated current  
(A)max.  
Rated voltage  
(V)max.  
frequency  
(GHz)typ.  
Part No.  
[1 line]  
Tolerance  
5ꢂ  
1.0  
2.7  
8.5  
8.0  
0.1  
0.1  
10  
10  
10  
10  
TCM0605S-120-2P-T□□□  
TCM0605S-350-2P-T□□□  
35  
12ꢂ  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
Common mode impedance  
DC resistance  
Insulation resistance  
4291A  
4338A  
4339A  
Agilent Technologies  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(10/14)  
E M C C o m p o n e n t s  
TCM-S seriesꢀ  
TCM0605S Type  
ELECTRICAL CHARACTERISTICS  
IMPEDANCE VS. FREQUENCY CHARACTERISTICS  
10000  
1000  
350 Common mode  
100  
10  
1
120 Common mode  
350 Differential mode  
120 Differential mode  
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4991A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS  
0
5
10  
15  
20  
25  
30  
35  
40  
120 Differential mode  
350 Differential mode  
120 Common mode  
350 Common mode  
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
E5071B  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(11/14)  
E M C C o m p o n e n t s  
TCM-S series  
TCM0806S Type  
SHAPE & DIMENSIONS  
0.65 0.05  
1
4
2
3
+0.05  
–0.10  
0.20  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
CIRCUIT DIAGRAM  
0.9  
1
2
4
3
• No polarity  
Dimensions in mm  
0.3  
0.3  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(12/14)  
E M C C o m p o n e n t s  
TCM-S seriesꢀ  
TCM0806S Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Common mode  
DC resistance  
(ꢂ)max.  
Cutoff  
Insulation  
resistance  
(Mꢂ)min.  
impedance  
[at 100MHz]  
(ꢂ)  
12  
Rated current  
(A)max.  
Rated voltage  
(V)max.  
frequency  
(GHz)typ.  
Part No.  
[1 line]  
Tolerance  
5ꢂ  
1
8.5  
7.0  
0.1  
0.1  
10  
10  
10  
10  
TCM0806S-120-2P-T□□□  
TCM0806S-350-2P-T□□□  
35  
12ꢂ  
1.5  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
Common mode impedance  
DC resistance  
Insulation resistance  
4291A  
4338A  
4339A  
Agilent Technologies  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(13/14)  
E M C C o m p o n e n t s  
TCM-S seriesꢀ  
TCM0806S Type  
ELECTRICAL CHARACTERISTICS  
IMPEDANCE VS. FREQUENCY CHARACTERISTICS  
10000  
1000  
100  
10  
350 Common mode  
120 Common mode  
350 Differential mode  
120 Differential mode  
1
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4991A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS  
0
5
120 Differential mode  
350 Differential mode  
10  
15  
20  
25  
30  
120 Common mode  
350 Common mode  
1
10  
100  
1000  
10000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
E5071B  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.
(14/14)  
E M C C o m p o n e n t s  
TCM-S series  
Packaging style  
REEL DIMENSIONS  
2.0 0.5  
1.0  
9+0.3  
ø13 0.2  
ø21 0.8  
13+1.4  
+0  
–3  
ø180  
Dimensions in mm  
TAPE DIMENSIONS  
2.0  
4.0  
ø1.5  
TCM0403S TCM0605S TCM0806S  
A
P1  
K
K
K
Dimensions in mm  
Type  
A
B
P1  
K
TCM0403S  
TCM0605S  
TCM0806S  
0.40  
0.63  
0.74  
0.55  
0.77  
0.94  
2.0  
2.0  
2.0  
0.27  
0.35  
0.50  
160min.  
Taping  
200min.  
300min.  
Drawing direction  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130723 / e9712_tcm.

相关型号：

TCM0605S-120-2P-T201

 Data Line Filter
TDK

TCM0605S-350-2P

 Data Line Filter,
TDK

TCM0605S-350-2P-T

 Data Line Filter, 2 Function(s), 10V, 0.1A, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-4
TDK

TCM0605S-350-2P-T201

 Data Line Filter,
TDK

TCM0605T-080-2P-T201

 共模滤波器/扼流圈
TDK

TCM0605T-200-2P-T201

 Data Line Filter,
TDK

TCM0806G

 Common Mode Filters(SMD) For High-speed Differential Signal Line
TDK

TCM0806G-350-2P

 Data Line Filter, 2 Function(s), 10V, 0.1A, ROHS COMPLIANT PACKAGE,4-PINS
TDK

TCM0806G-350-2P-T

 Data Line Filter, 2 Function(s), 10V, 0.1A, HALOGEN FREE AND ROHS COMPLIANT, SMD, 4 PIN
TDK

TCM0806G-650-2P

 Data Line Filter, 2 Function(s), 10V, 0.1A, ROHS COMPLIANT PACKAGE,4-PINS
TDK

TCM0806G-650-2P-T

 Data Line Filter, 2 Function(s), 10V, 0.1A, HALOGEN FREE AND ROHS COMPLIANT, SMD, 4 PIN
TDK

TCM0806G-900-2P

 Data Line Filter, 2 Function(s), 10V, 0.1A, ROHS COMPLIANT PACKAGE,4-PINS
TDK
©2020 ICPDF网 联系我们和版权申明