TF2722H-A652Y4R0-01 [TDK]
Single Phase EMI Filter, 280V, 50/60HzHz, ROHS COMPLIANT PACKAGE-4;
| 型号： | TF2722H-A652Y4R0-01 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Single Phase EMI Filter, 280V, 50/60HzHz, ROHS COMPLIANT PACKAGE-4 LTE |
| 文件： | 总13页 (文件大小：268K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
(1/13)
Common Mode Choke Coils(Line Filters) for AC Power Supply
Conformity to RoHS Directive
Toroidal Core Type TF Series
TDK common mode choke coils(line filters) are used in a wide
range of prevention of electromagnetic interference(EMI) and radio
frequency interference(RFI) from power supply lines and for pre-
vention of multifunctioning of products such as measuring equip-
ment and system equipment.
FEATURES
PRODUCT IDENTIFICATION
• Wide range of selection.
• High impedance at applicable frequency.
• High self-resonant frequency.
TF
(1)
V
A
Y
R
(6)
01
(7)
-
-
(2)
(3) (4)
(5)
(1) Core shape
TF: Toroidal core
(2) Dimensional code
Width× Depth
(3) External shape code
V: Vertical type H: Horizontal type
(4) High µ material
(5) Inductance valueꢀ
Example) 133:13mH
(6) Rated current value
Example) 3R0:3.0A
(7) Product management number
SELECTION CHART
Minimum
package quantity
(pieces/box)
Inductance value
min.
Rated current
(A)
Handling power∗
Weight
(g)typ.
Series
Configuration
Type
L× I2(mH× A2)
TF1813V
TF2518V
TF2721V
TF3020V
TF3525V
TF1713H
TF2520H
TF2722H
TF3022H
TF3526H
TF2628V-1H
TF3524V-1H
2 to 20mH
0.65 to 9mH
1 to 13mH
0.35 to 13mH
0.65 to 20mH
2 to 20mH
0.65 to 9mH
1 to 13mH
0.35 to 13mH
0.65 to 20mH
25 to 65µH
25 to 120µH
0.7 to 3.2
2.5 to 10
2.5 to 10
3 to 20
20
50
75
130
195
20
50
75
130
195
3.65
10.8
5
960
560
460
440
240
960
550
380
320
280
700
320
15
20
30
41
5.3
15
20
32
42
18
40
Vertical type
3 to 20
0.7 to 3.2
2.5 to 10
2.5 to 10
3 to 20
3 to 20
6 to 12
TF
Horizontal type
Vertical type
(For high frequency)
8 to 20
∗ Handling power=(Inductance value)× (Current)2. It is possible to design within the range below this value.
[Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(2/13)
Horizontal Type TF Series
FEATURES
• This series uses a high permeability toroidal ferrite core and
therefore provide large inductance with a little number of turns.
• Therefore its stray capacity is small and it keeps the impedance
required to effectively suppress high frequency noises.
• Products mounted on a base with fixed leads are easy to insert
to circuit boards.
TF1713H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
7 0.5
1
4
100
A203Y0R7
A153Y1R0
2
3
10
1
2
4
3
ø0.7
Weight: 5.3g typ.
A652Y1R6
1
17max.
Recommended hole diameter: ø1.2
Dimensions in mm
A502Y2R0
A202Y3R2
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
DC resistance Rated current
Part No.
(Ω)max.
0.73
0.44
Iac(A)max.
0.7
1
2000
TF1713H-A203Y0R7-01 20
TF1713H-A153Y1R0-01 15
TF1713H-A652Y1R6-01 6.5
100min.
0.19
0.14
1.6
2
45max.
TF1713H-A502Y2R0-01
TF1713H-A202Y3R2-01
5
2
0.065
3.2
–20 to +120
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
PACKAGING QUANTITIES
soldering tenperature∗1
Applicable safety
standard∗2
TF1713H-A
960pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(3/13)
TF2520H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
11
25max.
2
3
100
902Y2R5
10
Lot No.
1
1
4
4
3
1
702Y3R0
502Y4R0
252Y5R0
2
102Y8R0
0.1
Weight: 15g typ.
651Y10R0
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(Ω)max.
0.12
0.095
0.075
0.05
2000
Iac(A)max.
2.5
3
4
5
TF2520H-A902Y2R5-01
TF2520H-A702Y3R0-01
TF2520H-A502Y4R0-01
9
7
5
0.6
0.65
0.7
0.75
0.95
1
100min.
45max.
TF2520H-A252Y5R0-01 2.5
TF2520H-A102Y8R0-01
TF2520H-A651Y10R0-01 0.65
–20 to +120
1
0.025
0.02
8
10
–20 to +85
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
PACKAGING QUANTITIES
TF2520H-A
550pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(4/13)
TF2722H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
11
27max.
2
3
100
133Y2R5
10
Lot No.
1
1
4
4
3
1
0.1
103Y3R0
652Y4R0
2
422Y5R0
152Y8R0
102Y10R0
Weight: 20g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(mΩ)max. Iac(A)max.
2000
TF2722H-A133Y2R5-01 13
TF2722H-A103Y3R0-01 10
TF2722H-A652Y4R0-01 6.5
TF2722H-A422Y5R0-01 4.2
TF2722H-A152Y8R0-01 1.5
130
90
60
40
20
11
2.5
3
4
5
8
10
0.65
0.7
0.8
0.9
1
100min.
45max.
–20 to +120
TF2722H-A102Y10R0-01
1
1.2
–20 to +85
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
PACKAGING QUANTITIES
TF2722H-A
380pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(5/13)
TF3022H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
11
30max.
2
3
100
133Y3R0
802Y4R0
602Y5R0
10
Lot No.
1
4
1
1
4
3
502Y6R0
402Y7R0
2
252Y8R0
172Y10R0
0.1
Weight: 32g typ.
701Y15R0
351Y20R0
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(Ω)max.
0.1
2000
Iac(A)max.
3
4
5
6
7
8
10
15
20
TF3022H-A133Y3R0-01 13
0.75
0.8
0.9
0.95
1
1.1
1.3
1.6
1.7
100min.
TF3022H-A802Y4R0-01
TF3022H-A602Y5R0-01
TF3022H-A502Y6R0-01
TF3022H-A402Y7R0-01
TF3022H-A252Y8R0-01 2.5
TF3022H-A172Y10R0-01 1.7
TF3022H-A701Y15R0-01 0.7
TF3022H-A351Y20R0-01 0.35
8
6
5
4
0.07
0.05
0.04
0.035
0.025
0.015
0.007
0.005
45max.
–20 to +120
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
TF3022H-A
320pieces/box
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(6/13)
TF3526H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
11
35max.
2
3
100
203Y3R0
123Y4R0
103Y5R0
10
Lot No.
1
4
1
702Y6R0
602Y7R0
452Y8R0
1
2
4
3
302Y10R
0.1
102Y15R
651Y20R0
Weight: 42g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(mΩ)max. Iac(A)max.
2000
TF3526H-A203Y3R0-01 20
TF3526H-A123Y4R0-01 12
TF3526H-A103Y5R0-01 10
130
75
55
45
35
25
18
6
3
4
5
6
7
8
10
15
20
0.75
0.85
0.95
1
1.1
1.2
1.3
1.7
1.8
100min.
45max.
TF3526H-A702Y6R0-01
TF3526H-A602Y7R0-01
7
6
–20 to +120
TF3526H-A452Y8R0-01 4.5
–20 to +85
TF3526H-A302Y10R0-01
TF3526H-A102Y15R0-01
3
1
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
TF3526H-A651Y20R0-01 0.65
4
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
TF3526H-A
280pieces/box
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(7/13)
Vertical Type TF Series
TF1813V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
100
A203Y0R7
A153Y1R0
ø0.7
13max.
18max.
14 0.5
10
1
2
4
3
1
2
4
3
Weight: 5g typ.
Recommended hole diameter: ø1.2
Dimensions in mm
A652Y1R6
1
A502Y2R0
A202Y3R2
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
DC resistance Rated current
Part No.
(Ω)max.
0.73
0.44
Iac(A)max.
0.7
1
2000
TF1813V-A203Y0R7-01 20
TF1813V-A153Y1R0-01 15
TF1813V-A652Y1R6-01 6.5
100min.
0.19
0.14
1.6
2
45max.
TF1813V-A502Y2R0-01
TF1813V-A202Y3R2-01
5
2
0.065
3.2
–20 to +120
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
PACKAGING QUANTITIES
soldering tenperature∗1
Applicable safety
standard∗2
TF1813V-A
960pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(8/13)
TF2518V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
10
1
4
100
A902Y2R5
ø25max.
2
3
10
1
2
4
3
L1
L
2
1
A702Y3R0
Weight: 15g typ.
A502Y4R0
A252Y5R0
ød
Recommended hole diameter: ød+0.5
Dimensions in mm
A102Y8R0
0.1
A651Y10R0
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(Ω)max.
0.12
0.095
0.075
0.05
2000
Iac(A)max.
2.5
3
4
5
TF2518V-A902Y2R5-01
TF2518V-A702Y3R0-01
TF2518V-A502Y4R0-01
9
7
5
0.6
0.65
0.7
0.75
0.95
1
100min.
45max.
TF2518V-A252Y5R0-01 2.5
TF2518V-A102Y8R0-01
TF2518V-A651Y10R0-01 0.65
–20 to +120
1
0.025
0.02
8
10
–20 to +85
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
PACKAGING QUANTITIES
TF2518V-A
560pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(9/13)
TF2721V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
10
1
4
100
133Y2R5
ø27max.
2
3
10
1
2
4
3
L1
L
2
1
0.1
103Y3R0
652Y4R0
Weight: 20g typ.
422Y5R0
152Y8R0
ød
Recommended hole diameter: ød+0.5
Dimensions in mm
102Y10R0
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(mΩ)max. Iac(A)max.
2000
TF2721V-A133Y2R5-01 13
TF2721V-A103Y3R0-01 10
TF2721V-A652Y4R0-01 6.5
TF2721V-A422Y5R0-01 4.2
TF2721V-A152Y8R0-01 1.5
130
90
60
40
20
11
2.5
3
4
5
8
10
0.65
0.7
0.8
0.9
1
100min.
45max.
–20 to +120
TF2721V-A102Y10R0-01
1
1.2
–20 to +85
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
PACKAGING QUANTITIES
TF2721V-A
460pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(10/13)
TF3020V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
10
1
4
100
133Y3R0
802Y4R0
602Y5R0
10
2
3
ø30max.
1
4
3
1
L1
L
2
502Y6R0
402Y7R0
2
252Y8R0
172Y10R0
ød
Weight: 30g typ.
0.1
701Y15R0
351Y20R0
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(Ω)max.
0.1
2000
Iac(A)max.
3
4
5
6
7
8
10
15
20
TF3020V-A133Y3R0-01 13
0.75
0.8
0.9
0.95
1
1.1
1.3
1.6
1.7
100min.
TF3020V-A802Y4R0-01
TF3020V-A602Y5R0-01
TF3020V-A502Y6R0-01
TF3020V-A402Y7R0-01
TF3020V-A252Y8R0-01 2.5
TF3020V-A172Y10R0-01 1.7
TF3020V-A701Y15R0-01 0.7
TF3020V-A351Y20R0-01 0.35
8
6
5
4
0.07
0.05
0.04
0.035
0.025
0.015
0.007
0.005
45max.
–20 to +120
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Resistance to
soldering tenperature∗1
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
TF3020V-A
440pieces/box
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(11/13)
TF3525V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
18
1
4
100
203Y3R0
123Y4R0
103Y5R0
10
2
3
ø35max.
1
4
3
1
702Y6R0
L1
L
2
602Y7R0
452Y8R0
2
302Y10R0
0.1
Weight: 41g typ.
102Y15R0
651Y20R0
ød
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
DC
Rated
Inductance
(mH)min.
ød
(mm)
Part No.
resistance current
(mΩ)max. Iac(A)max.
2000
TF3525V-A203Y3R0-01 20
TF3525V-A123Y4R0-01 12
TF3525V-A103Y5R0-01 10
130
75
55
45
35
25
18
6
3
4
5
6
7
8
10
15
20
0.75
0.85
0.95
1
1.1
1.2
1.3
1.7
1.8
100min.
45max.
TF3525V-A702Y6R0-01
TF3525V-A602Y7R0-01
7
6
–20 to +120
TF3525V-A452Y8R0-01 4.5
–20 to +85
TF3525V-A302Y10R0-01
TF3525V-A102Y15R0-01
3
1
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
TF3525V-A651Y20R0-01 0.65
4
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
TF3525V-A
240pieces/box
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(12/13)
Vertical Type (For High Frequency) TF Series
FEATURES
• This series is designed to reduce stray capacity between
windings by using a single-layer coil construction on Ni-Zn ferrite
cores, which offer excellent high frequency characteristics.
• This series provides excellent noise suppression for high
frequency ranges including the FM band.
TF2628V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
10
1
4
10
ø27max.
2
3
1
1
2
4
3
650Y6R0
L1
L
2
450Y9R0
250Y12R0
0.1
Weight: 18g typ.
ød
Recommended hole diameter: ød+0.5
Dimensions in mm
0.01
0.001
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
DC
Rated
Inductance
(µH)min.
ød
(mm)
Part No.
resistance current
(mΩ)max. Iac(A)max.
2000
TF2628V-650Y6R0-1H
TF2628V-450Y9R0-1H
TF2628V-250Y12R0-1H 25
65
45
20
12
9
6
9
12
0.8
1
1.2
100min.
45max.
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz]
–20 to +120
–20 to +85
PACKAGING QUANTITIES
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
TF2628V-1H
700pieces/box
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
(13/13)
TF3524V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
(
)
18
1
4
10
1
2
3
ø35max.
1
4
3
121Y8R0
0.1
750Y12R0
450Y15R0
250Y20R0
L1
L
2
2
Weight: 40g typ.
0.01
ød
Recommended hole diameter: ød+0.5
Dimensions in mm
0.001
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
DC
Rated
Inductance
(µH)min.
ød
(mm)
Part No.
resistance current
(mΩ)max. Iac(A)max.
2000
TF3524V-121Y8R0-1H
120
20
10
7
8
1
100min.
TF3524V-750Y12R0-1H 75
TF3524V-450Y15R0-1H 45
TF3524V-250Y20R0-1H 25
12
15
20
1.3
1.6
1.8
45max.
5
–20 to +120
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz]
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Resistance to
PACKAGING QUANTITIES
soldering tenperature∗1
Applicable safety
standard∗2
TF3524V-1H
320pieces/box
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
001-03 / 20061027 / e93_tf.
相关型号：
TF28F008SA-100
8-MBIT (1-MBIT x 8) FlashFileTM MEMORYWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
INTEL
TF28F010-90
Flash, 128KX8, 90ns, PDSO32, 0.310 X 0.720 INCH, REVERSE, TSOP-32Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
INTEL
TF28F020-90
Flash, 256KX8, 90ns, PDSO32, 8 X 20 MM, REVERSE, TSOP-32Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
INTEL
TF2XX
N-CHANNEL JFETWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC
TF2XX
Capacitor Microphone ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SANYO
TF3
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNTâ¢, Molded Case, Built-In-FuseWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
TF3-73BA1
Crystal Filter, 1 Function(s), 73.35MHz, 6.5kHz BW(delta f), Monolithic, LEAD FREE PACKAGE-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEIKO
TF3-73BA2
Crystal Filter, 1 Function(s), 73.35MHz, Monolithic, LEAD FREE PACKAGE-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEIKO
TF3-D0AC9
Crystal Filter, 1 Function(s), 130.05MHz, MonolithicWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEIKO
TF3-D0ACX
Crystal Filter, 1 Function(s), 120MHz, 14kHz BW(delta f), MonolithicWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEIKO
TF3-J3DC5
1 FUNCTIONS, 243.95 MHz, 13 kHz BW(delta f), CRYSTAL FILTER, ROHS COMPLIANT, MINIATURE PACKAGE-8Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEIKO
TF3-Q3GC1
1 FUNCTIONS, 45 MHz, 130 kHz BW(delta f), CRYSTAL FILTER, ROHS COMPLIANT, MINIATURE PACKAGE-8Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEIKO
©2020 ICPDF网 联系我们和版权申明