MAAP-011232-TR1000 [TE]
1 W Driver Amplifier with VG Enable;型号: | MAAP-011232-TR1000 |
厂家: | TE CONNECTIVITY |
描述: | 1 W Driver Amplifier with VG Enable |
文件: | 总15页 (文件大小:1080K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Features
Functional Schematic
Gain: 23 dB
P-1dB: 29 dBm
PSAT: 30 dBm
PAE at PSAT: 40%
16 15 14 13
OIP3: 40 dBm
Typical bias conditions: 9 V, 265 mA
Fully matched output
Lead-Free 3 mm 16-LD PQFN package
Halogen-Free “Green” Mold Compound
RoHS* Compliant
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
12
11
10
9
1
2
3
4
Description
The MAAP-011232 is a 2-stage power amplifier with
gain shut off, operating from 100 MHz to 3 GHz. For
operation in the 100 MHz to 1 GHz frequency range
no I/O matching is required. Internal DC blocking is
provided at the input, while the RF output port is DC
coupled through an external bias-tee. Bias current,
RF gain and output power are controlled with a gate
bias voltage (VG). Typical current consumption is
less than 300 mA at maximum output power.
5
6
7
8
Pin Configuration3,4
Pin No.
Function
No Connection
1 - 4
The MAAP-011232 is well suited to both power and
driver requirements for multiple applications such as
LMR, Milcom, Sensors & Telemetry, Test &
Measurement and Satcom.
5
6
Drain Voltage VD1
Ground
The MAAP-011232 is fabricated using a GaAs
D-mode high breakdown process which features full
passivation for increased performance and reliability.
7
RF Input
8
Ground
Ordering Information1,2
9 - 12
13
14
15
16
No Connection
Ground
Part Number
Package
Bulk
MAAP-011232
RF Output and Drain Voltage VD2
Ground
MAAP-011232-TR0500
MAAP-011232-TR1000
MAAP-011232-001SMB
MAAP-011232-002SMB
500 Piece Reel
1000 Piece Reel
Sample Board Type A
Sample Board Type B
Shut Off Voltage VG
3. MACOM recommends connecting unused package pins to
ground.
4. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Electrical Specifications:
Freq. = 1 GHz, TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω,
VG pulsed with 1 ms pulse width and 10% duty cycle
Parameter
Small-Signal Gain
Symbol
SSG
Test Conditions
-10 dBm input drive level
—
Units
dB
Min.
—
Typ.
24.5
29
Max.
—
Output Power at 1dB compression
Saturated Output Power
P-1dB
dBm
dBm
—
—
PSAT
3 dB Gain compression
28.5
30
—
Power Added Efficiency
PAE
3 dB Gain compression
%
35
40
—
Reverse Isolation
Input Return Loss
S12
IRL
ORL
OIP3
VD
-10 dBm input drive level
-10 dBm input drive level
-10 dBm input drive level
-13 dBm/tone, F1-F2 = 6 MHz
—
dB
dB
dB
dBm
V
—
—
—
—
—
—
50
8
—
—
—
—
—
—
Output Return Loss
Output Third Order Intercept
Drain Bias Voltage
12
40
9
Gate Bias Voltage
VG
—
V
-0.55
Schematic of the Production Test Board
VG
VD1
C4
C5
VD2
L2
4
3
2 Pin 1
5
6
16
C2
L3
15
14
13
RF OUT
RF IN
7
8
C3
9
10 11 12
2
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Absolute Maximum Ratings5,6
Handling Procedures
Please observe the following precautions to avoid
damage:
Parameter
Absolute Maximum
RF Input Power
20 dBm
10 V
Static Sensitivity
Drain Voltage VD1
Drain Voltage VD2
Junction Temperature7,8
Operating Temperature
Storage Temperature
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
10 V
+150°C
-40°C to +85°C
-55°C to +150°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. MACOM does not recommend sustained operation near these
survivability limits.
Operating the MAAP-011232
To operate the device, follow these steps:
7. Operating at nominal conditions with TJ ≤ +150°C will ensure
1. Set VG to -2 V.
MTTF > 1 x 106 hours.
2. Turn on VD1 and VD2 to 5-9 V.
3. Adjust VG to set quiescent current.
4. Turn off in reverse order with VG last.
8. Junction Temperature (TJ) = TC + ӨJC * [(V * I) - (POUT - PIN)]
Typical thermal resistance (Өjc) = 29°C/W.
3
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Typical Electrical Specifications: Test Board A: 100 - 1600 MHz Input Tuning
TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
Parameter
Frequency
Sym-
F
Test Conditions
—
Units
MHz
dB
Typical Values
100
20
29
30
32
79
4
700
25
29
30
40
56
17
16
44
1100
25
1600
21
29
30
37
53
7
Small-Signal Gain
SSG
P-1dB
PSAT
PAE
S12
IRL
-10 dBm input drive level
1 dB Gain compression
3 dB Gain compression
3 dB Gain compression
-10 dBm input drive level
-10 dBm input drive level
-10 dBm input drive level
Output Power at 1dB compression
Saturated Output Power
Power Added Efficiency
Reverse Isolation
dBm
dBm
%
30
30.5
45
dB
55
Input Return Loss
dB
28
Output Return Loss
Output Third Order Intercept
Drain Bias Voltage
ORL
dB
17
41
15
14
40
OIP3 -13 dBm/tone, F1-F2 = 6 MHz dBm
43
VD
VG
—
—
V
V
9
Gate Bias Voltage
-0.55
Schematic of the Test Board Type A: 100-1600 MHz Input Tuning
VG
VD1
C4
C5
VD2
L2
4
3
2 Pin 1
5
6
7
8
16
C2
L3
15
14
13
L1
C1
RF OUT
RF IN
C3
9
10 11 12
4
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type A: 100 - 1600 MHz Input Tuning
PCB Material: R4003C LoPro, 0.008” THICK, Solid Copper filled vias
Parts List
Part
C1
Description
Capacitor
Capacitor
Capacitor
Capacitor
Inductor
Value
0.6 pF
0.1 µF
100 pF
10 nF
7.5 nH
560 nH
110 nH
—
Size
0402
0402
0402
0402
0402
0402
0603
—
Manufacturer
Murata
C2, C4
C3
Murata
Murata
C5
Murata
L1
0402CS, Coilcraft
0402AF, Coilcraft
0603HP, Coilcraft
L2
Inductor
L3
Inductor
J1, J2
SMA Connector
142-0701-881 Emerson
5
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type A: S-parameters over Temperature
Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
Insertion Gain vs. Frequency
Isolation vs. Frequency
30
-20
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
25
20
15
10
5
-30
-40
-50
-60
-70
-80
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
0
0
-5
-10
-15
-20
-25
-30
-5
-10
-15
-20
-25
-30
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
6
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type A - Power Performance @ Room Temperature
Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
POUT, Gain and Efficiency vs. PIN @ 700 MHz
Bias Current vs. PIN @ 700 MHz
60
250
50
200
150
Pout
Gain
Efficiency
40
30
20
10
0
ID1
ID2
100
50
0
-15
-10
-5
0
5
10
15
15
15
-15
-10
-5
0
5
10
10
10
15
Input Power (dBm)
Input Power (dBm)
Bias Current vs. PIN @ 1100 MHz
Pout, Gain and Efficiency vs. PIN @ 1100 MHz
60
250
50
200
150
Pout
Gain
Efficiency
40
30
20
10
0
ID1
ID2
100
50
0
-15
-10
-5
0
5
10
-15
-10
-5
0
5
15
Input Power (dBm)
Input Power (dBm)
Pout, Gain and Efficiency vs. PIN @ 1600 MHz
Bias Current vs. PIN @ 1600 MHz
60
250
50
200
150
Pout
Gain
Efficiency
40
30
20
10
0
ID1
ID2
100
50
0
-15
-10
-5
0
5
10
-15
-10
-5
0
5
15
Input Power (dBm)
Input Power (dBm)
7
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type A - Power Performance over Temperature
Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
P1dB vs. Frequency
Saturated Power vs. Frequency
35
35
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
33
31
29
27
25
33
31
29
27
25
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
Frequency (GHz)
Output IP3 vs. Frequency
PAE vs. Frequency
50
50
40
30
20
10
0
40
30
20
10
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
Frequency (GHz)
PIN = -13 dBm/tone, tone separation = 6 MHz
Gain Control Range vs. Frequency
50
40
30
20
10
0
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
Measured for VG between -0.4 V and -1.4 V
8
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Typical Electrical Specifications: Test Board B: 1600 - 3000 MHz Input Tuning
TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
Parameter
Frequency
Symbol
F
Test Conditions
—
Units
MHz
dB
Typical Values
2000
23
29
30
37
51
9
2500
25
3000
16
30
30.5
37
54
2
Small-Signal Gain
SSG
P-1dB
PSAT
PAE
S12
-10 dBm input drive level
1 dB Gain compression
3 dB Gain compression
3 dB Gain compression
-10 dBm input drive level
-10 dBm input drive level
-10 dBm input drive level
Output Power @ 1dB compression
Saturated Output Power
Power Added Efficiency
Reverse Isolation
dBm
dBm
%
29
30
40.5
52
dB
Input Return Loss
IRL
dB
11
Output Return Loss
Output Third Order Intercept
Drain Bias Voltage
ORL
dB
10
40
9
9
OIP3 -13 dBm/tone, F1-F2 = 6 MHz dBm
42
40
VD
VG
—
—
V
V
9
Gate Bias Voltage
-0.55
Schematic of the Test Board Type B: 1600-3000 MHz Input Tuning
VG
VD1
C7
C5
C6
VD2
L4
C2
L2
L3
C8
4
3
2 Pin 1
5
6
7
8
16
C4
L5
15
14
13
L1
RF OUT
RF IN
C3
C1
9
10 11 12
9
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type B: 1600 - 3000 MHz Input Tuning
PCB Material: R4003C LoPro, 0.008” THICK, Solid Copper filled vias
Parts List
Part
C1
Description
Capacitor
Capacitor
Capacitor
Capacitor
Inductor
Value
1.2 pF
10 nF
0.1 µF
100 pF
5.6 nH
560 nH
110 nH
10 nH
3.3 nH
—
Size
0402
0402
0402
0402
0402
0402
0603
0402
0402
—
Manufacturer
PPI
C4, C5
C2, C6
C3
Murata
Murata
Murata
L1
0402HP, Coilcraft
0402AF, Coilcraft
0603HP, Coilcraft
0402HP, Coilcraft
0402HP, Coilcraft
142-0701-881 Emerson
L2
Inductor
L3
Inductor
L4
Inductor
L5
Inductor
J1, J2
SMA Connector
10
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type B: S-parameters over Temperature
Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
Insertion Gain vs. Frequency
Isolation vs. Frequency
-20
30
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-30
-40
-50
-60
-70
-80
25
20
15
10
5
0
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
0
0
-5
-5
-10
-15
-20
-25
-30
-10
-15
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-20
-25
-30
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
11
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type B - Power Performance @ Room Temperature
Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
POUT, Gain and Efficiency vs. PIN @ 2 GHz
Bias Current vs. PIN @ 2 GHz
60
250
50
200
150
Pout
Gain
Efficiency
40
30
20
10
0
ID1
ID2
100
50
0
-15
-10
-5
0
5
10
10
10
15
15
15
-15
-10
-5
0
5
10
15
Input Power (dBm)
Input Power (dBm)
Bias Current vs. PIN @ 2.5 GHz
Pout, Gain and Efficiency vs. PIN @ 2.5 GHz
250
60
50
200
150
Pout
Gain
Efficiency
40
30
20
10
0
ID1
ID2
100
50
0
-15
-10
-5
0
5
10
15
-15
-10
-5
0
5
Input Power (dBm)
Input Power (dBm)
Pout, Gain and Efficiency vs. PIN @ 3 GHz
Bias Current vs. PIN @ 3 GHz
60
250
50
200
150
Pout
Gain
Efficiency
40
30
20
10
0
ID1
ID2
100
50
0
-15
-10
-5
0
5
-15
-10
-5
0
5
10
15
Input Power (dBm)
Input Power (dBm)
12
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Test Board Type B - Power Performance over Temperature
Test Conditions: TA = +25°C, VD1 = VD2 = 9 V, IDQ1 = 65 mA, IDQ2 = 200 mA, Z0 = 50 Ω, CW
P1dB vs. Frequency
Saturated Power vs. Frequency
35
35
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
33
33
31
29
27
25
31
29
27
25
1.0
1.5
2.0
2.5
3.0
3.5
3.5
3.5
1.0
1.5
2.0
2.5
3.0
3.5
Frequency (GHz)
Frequency (GHz)
Output IP3 vs. Frequency
PAE vs. Frequency
50
50
40
30
20
10
0
40
30
20
10
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
1.0
1.5
2.0
2.5
3.0
1.0
1.5
2.0
Frequency (GHz)
PIN = -13 dBm/tone, tone separation = 6 MHz
2.5
3.0
3.5
Frequency (GHz)
Gain Control Range vs. Frequency
50
40
30
20
10
0
1.0
1.5
2.0
Frequency (GHz)
Measured for VG between -0.4 V and -1.4 V
2.5
3.0
13
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
Recommended Landing Pattern 9,10
9. All dimensions are in inches.
10. Landing pattern indicates solder mask opening. Cu-filled via-holes under the ground are used for optimal thermal performance.
Recommended pattern: 8-mil diameter, 8-mil spacing.
Lead-Free 3 mm 16-Lead PQFN†
All dimensions shown as inches/mm
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
14
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
MAAP-011232
1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Rev. V1
MACOM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
15
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0011105
相关型号:
©2020 ICPDF网 联系我们和版权申明