MAAP-011247-000PPR [TE]
Lead-Free 5 mm 32-lead AQFN Package;
| 型号： | MAAP-011247-000PPR |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Lead-Free 5 mm 32-lead AQFN Package |
| 文件： | 总8页 (文件大小：856K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Features
Functional Schematic
High Gain: 12 dB
P1dB: 30 dBm
PSAT: 33 dBm
Output IP3: +42 dBm
Bias Voltage: VDD = 15 V
Bias Current: IDSQ = 500 mA
50 Ω Matched Input / Output
Temperature Compensated Output Power
Detector
32 31 30
28
26 25
29
27
GND
1
2
3
4
5
6
7
8
GND
N/C
N/C
24
23
22
21
N/C
N/C
GND
RFOUT/VDD
GND
Lead-Free 5 mm 32-lead AQFN Package
RoHS* Compliant
RFIN
GND
N/C
20
19
18
N/C
N/C
Description
GND
17 GND
The MAAP-011247 is a 2 W distributed power
amplifier offered in a lead-free 5 mm 32-lead AQFN
package. The power amplifier operates from DC to
22 GHz and provides 12 dB of linear gain and 33
dBm of saturated output power. The device is fully
11
13 14 15
9
10
12
16
matched across the band and includes
temperature compensated output power detector.
a
Pin Configuration1,2
The MAAP-011247 can be used as a power
amplifier stage or as a driver stage in higher power
applications. This device is ideally suited for test
and measurement, EW, ECM, and radar
applications.
Pin No.
Pin Name
Description
RF Input
5
RFIN
VG1
13
21
26
30
Gate Voltage
RFOUT/VDD RF Output / Drain Voltage
This product is fabricated using a GaAs pHEMT
process which features full passivation for enhanced
reliability.
DET
AUX
Power Detector
Auxiliary
1, 4, 6, 8, 9, 16,
17, 20, 24, 25, 32
GND
N/C
Ground
Ordering Information
Part Number
Package
Bulk
2, 3, 7, 10 - 12,
14, 15, 18, 19, 22,
23, 27 - 29, 31
MAAP-011247-000PPR
MAAP-011247-EV1PPR
No Connection
Sample Board
1. MACOM recommends connecting all no connection pins to
ground.
2. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
*Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Electrical Specifications: TA = +25°C, VDD = 15 V, IDSQ3 = 500 mA, Z0 = 50 Ω
Parameter
Test Conditions
Units
Min.
Typ.
Max.
2 GHz
12 GHz
18 GHz
22 GHz
12.0
11.5
12.0
11.5
Gain
dB
—
—
2 GHz
12 GHz
18 GHz
32.0
33.5
33.0
31.0
PSAT
P1dB
OIP3
dBm
dBm
dBm
—
—
—
—
—
—
22 GHz
PIN = +23 dBm
2 GHz
12 GHz
18 GHz
22 GHz
30.0
31.0
30.0
28.0
2 GHz
12 GHz
18 GHz
22 GHz
42.0
46.0
42.0
44.0
PIN = + 20 dBm/tone (10 MHz Tone Spacing)
2 GHz
12 GHz
18 GHz
16.5
20.0
17.0
12.0
PAE
%
—
—
22 GHz
PIN = + 23 dBm
Input Return Loss
Output Return Loss
IDD (with RF drive)
IG1
PIN = - 20 dBm
PIN = - 20 dBm
PIN = + 23 dBm
—
dB
dB
—
—
—
—
15
15
600
8
—
—
—
—
mA
mA
3. Set IDSQ according to bias procedures in page 3.
Absolute Maximum Ratings6,7
Maximum Operating Ratings
Parameter
Rating
Parameter
Absolute Maximum
Input Power
25 dBm
Input Power
28 dBm
Junction Temperature4,5
Operating Temperature
+150°C
Drain Voltage
Gate Voltage
+16 V
-5 to 0 V
-40°C to +85°C
Junction Temperature8
Storage Temperature
+175°C
4. Operating at nominal conditions with junction temperature
≤ +150°C will ensure MTTF > 1 x 106 hours.
-65°C to +125°C
5. Junction Temperature (TJ) = TC + ӨJC * ((V * I) - (POUT - PIN))
Typical thermal resistance (ӨJC) = 7°C/W.
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. MACOM does not recommend sustained operation near these
survivability limits.
a) For TC = +85°C,
TJ = +145°C @ 15 V, I = 0.69 A, POUT = 33 dBm, PIN = 23 dBm
8. Junction temperature directly effects device MTTF. Junction
temperature should be kept as low as possible to maximize
lifetime.
2
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Application Schematic
DET
C1
Operating the MAAP-011247
Turn-on
VDD
32 31 30
28
26 25
29
27
1
2
3
4
5
6
7
8
24
23
22
21
1. Apply VG1 (-4.5 V).
2. Increase VDD to 15 V.
3. Set IDSQ by adjusting VG1 more positive
(typically -3.4 V for IDSQ = 500 mA).
4. Apply RFIN signal.
RF OUT
RF IN
20
19
18
17
External
Bias-Tee
Turn-off
1. Remove RFIN signal.
2. Decrease VG1 to -4.5 V.
3. Decrease VDD to 0 V.
11
13 14 15
9
10
12
16
VG1
C2
Bill of Materials9,10,11
Biasing Conditions
Recommended biasing conditions are VDD = 15 V,
IDSQ = 500 mA (controlled with VG1).
Part
C1, C2
U1
Value
1 µF
—
Size
0402
—
Comment
bypass
VDD Bias must be applied through a resonant free
high inductance on the RF output line.
MAAP-011247
By-pass capacitor C1 for the auxiliary pad is for low
frequency operation extension (below 1 GHz).
9. C1 & C2 are required for operation below 1 GHz.
10. High power external bias tee was used for measurements.
11. External DC block was used on input.
Recommended PCB Information
Handling Procedures
Please observe the following precautions to avoid
damage:
RF input and output are 50 Ω transmission lines.
Single layer 8 mil Rogers RO4008 with 1/2 oz. Cu.
Use copper filled vias under ground paddle.
Static Sensitivity
Grounding
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these HBM Class 1A
devices.
It is recommended that the total ground (common
mode) inductance not exceed 0.03 nH (30 pH). This
is equivalent to placing at least four 8-mil (200-μm)
diameter vias under the device, assuming an 8-mil
(200-μm) thick RF layer to ground.
3
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Typical Performance Curves: VDD = 15 V, IDSQ = 500 mA, VG1 = -3.4 V typical
S Parameters
Gain
20
20
10
0
15
10
5
S21
S11
S22
-10
-20
+25°C
-40°C
+85°C
-30
0
0
5
10
15
20
25
0
5
10
15
20
25
Frequency (GHz)
Frequency (GHz)
Input Return Loss
Output Return Loss
0
0
+25°C
-40°C
+85°C
+25°C
-40°C
-5
-5
+85°C
-10
-10
-15
-20
-25
-30
-15
-20
-25
-30
0
5
10
15
20
25
0
5
10
15
20
25
Frequency (GHz)
Frequency (GHz)
S Parameters @ Low Frequency
Isolation
0
30
+25°C
-40°C
+85°C
20
-20
-40
-60
10
S21
S11
S22
0
-10
-20
-30
-80
0
5
10
15
20
25
0
2
4
6
8
10
Frequency (GHz)
Frequency (MHz)
4
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Typical Performance Curves: VDD = 15 V, IDSQ = 500 mA, VG1 = -3.4 V typical
Noise Figure
P1dB over Temperature
40
10
8
6
4
2
35
30
+25°C
-40°C
+85°C
25
20
0
0
0
5
10
15
20
25
5
10
15
20
25
Frequency (GHz)
Frequency (GHz)
Output IP3 vs. POUT / Tone
PSAT over Temperature
40
35
30
25
20
60
50
40
2 GHz
12 GHz
22 GHz
+25°C
-40°C
+85°C
30
20
0
5
10
15
20
25
10
12
14
16
18
20
22
24
26
Frequency (GHz)
Output Power (dBm) / Tone
2nd Harmonic
0
Pout = 14 dBm
Pout = 18 dBm
Pout = 22 dBm
-10
-20
-30
-40
-50
-60
0
5
10
15
20
25
Frequency (GHz)
5
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Typical Performance Curves: VDD = 15 V, IDSQ = 500 mA, VG1 = -3.4 V typical
Power Compression @ 2 GHz
Power Compression @ 12 GHz
35
35
Pout
Gain
PAE
Pout
Gain
PAE
30
30
25
25
20
15
10
5
20
15
10
5
0
0
0
5
10
15
20
25
0
5
10
15
20
25
Input Power (dBm)
Input Power (dBm)
Current
Power Compression @ 22 GHz
35
1.0
2 GHz
12 GHz
Pout
Gain
30
0.8
0.6
0.4
0.2
PAE
22 GHz
25
20
15
10
5
0
0.0
0
0
5
10
15
20
25
5
10
15
20
25
Input Power (dBm)
Input Power (dBm)
6
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
Lead-Free 5 mm 32-lead AQFN Package†
All Dimensions shown as inches [mm].
†
Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 3 requirements.
Plating is NiPdAu.
7
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
MAAP-011247
Power Amplifier, 2 W
DC - 22 GHz
Preliminary - Rev. V1P
MACOM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
8
PRELIMINARY: Data Sheets contain information regarding a product MACOM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0011894
相关型号：
©2020 ICPDF网 联系我们和版权申明