MAAPGM0069 [TE]
Amplifier, Power, 2W 7.1-11.7 GHz; 放大器，电源， 2W 7.1-11.7 GHz的
| 型号： | MAAPGM0069 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Amplifier, Power, 2W 7.1-11.7 GHz |
| 文件： | 总4页 (文件大小：208K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RoHS
Compliant
MAAP-000069-PKG003
Rev —
Amplifier, Power, 2W
7.1-11.7 GHz
Advance Information
Features
♦ 2 Watt Saturated Output Power Level
♦ Variable Drain Voltage (6-10V) Operation
♦ MSAG™ Process
Description
The MAAP-000069-PKG0003 is a 4-stage 2 W power ampli-
fier with on-chip bias networks in a 20 lead MLP package,
allowing easy assembly. This product is fully matched to 50
ohms on both the input and output. It can be used as a power
amplifier stage or as a driver stage in high power applications.
YYWW
AP069G
XXXX
Each device is 100% RF tested to ensure performance
compliance. The part is fabricated using M/A-COM’s GaAs
Multifunction Self-Aligned Gate (MSAG) Process.
MACOM
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted
transistors and multiple implant capability enabling power,
low-noise, switch and digital FETs on a single chip. The use
of refractory metals and the absence of platinum in the gate
metal formulation prevents hydrogen poisoning when em-
ployed in hermetic packaging.
Primary Applications
♦ Point-to-Point Radio
♦ 7, 8 and 11 GHz Bands
Also Available in:
Description
Die
Ceramic Package
Die Sample Board
Die Mechanical Sample
Packaged Sample Board
Part Number
MAAPGM0069-DIE
MAAPGM0069
MAAP-000069-SMB004 MAAP-000069-MCH000
MAAP-000069-SMB003
(Lead Free)
Electrical Characteristics: TB = 30°C1, Z0 = 50 Ω, VDD = 8V, IDQ = 760mA2, Pin = 4 dBm, RG = 100 Ω
Parameter
Bandwidth
Symbol
Typical
7.1-11.7
33
Units
GHz
dBm
dBm
%
f
Output Power
POUT
P1dB
PAE
G
1-dB Compression Point
Power Added Efficiency
Small Signal Gain
Input VSWR
32
27
31
dB
VSWR
1.8:1
Output VSWR
Gate Current
2.0:1
2
VSWR
IGG
mA
mA
Drain Current
960
44
IDD
Output Third Order Intercept
dBm
dBc
TOI
IM3
Output Third Order Intermod,
Pout = 25 dBm (DCL)
45
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.6 and –1.2V to achieve specified Idq.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAP-000069-PKG003
Rev —
Amplifier, Power, 2W
7.1-11.7 GHz
Advance Information
Maximum Ratings3
Parameter
Absolute Maximum
Units
dBm
V
Symbol
PIN
Input Power
13.0
+12.0
-3.0
Drain Supply Voltage
VDD
Gate Supply Voltage
V
VGG
IDQ
PDISS
TJ
Quiescent Drain Current (No RF)
Quiescent DC Power Dissipated (No RF)
Junction Temperature
1.22
A
12.2
W
170
°C
°C
Storage Temperature
TSTG
-55 to +150
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions4
Characteristic
Symbol
Min
Typ
Max
Unit
Drain Voltage
Gate Voltage
VDD
VGG
6.0
8.0
10.0
-1.2
V
V
-2.6
-2.0
Input Power
PIN
ΘJC
TB
8.0
10.0
dBm
°C/W
°C
Thermal Resistance
MMIC Base Temperature
12.4
Note 5
4. Operation outside of these ranges may reduce product reliability.
5. MMIC Base Temperature = 170°C — ΘJC* VDD * IDQ
Operating Instructions
This device is static sensitive. Please handle with
care. To operate the device, follow these steps.
1. Apply VGG = -2.7 V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 8.0 V.
3. Adjust VGG to set IDQ, (approximately @ –2.0 V).
4. Set RF input.
5. Power down sequence in reverse. Turn VGG off
last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAP-000069-PKG003
Rev —
Amplifier, Power, 2W
7.1-11.7 GHz
Advance Information
Figure 1. 5x5 mm 20-Lead MLP.
VDD
100pF
100pF
0.1μF
(as close to the package as possible)
(as close to the package as possible)
YYWW
AP069G
XXXX
MACOM
VGG
100pF
0.1μF
100pF
(as close to the package as possible)
(as close to the package as possible)
Figure 2. Recommended Bias Configuration.
Note: The exposed pad centered on the package bottom must be connected to RF
and dc ground for proper electrical and thermal operation.
Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines.
Additional Precaution: All parts must receive a bake-out of 125ºC for 24 hours prior to any solder reflow operation.
*Application Notes can be found by going to the Site Search Page of M/A-COM’s web page (http://www.macom.com/Application%20Notes/
index.htm) ) and searching for the required Application Note.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAP-000069-PKG003
Rev —
Amplifier, Power, 2W
7.1-11.7 GHz
Advance Information
YYWW
AP069G
XXXX
MACOM
Figure 3. Demonstration Board PN MAAP-000069-SMB003 (available upon request).
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.
相关型号：
©2020 ICPDF网 联系我们和版权申明