MADL-011008 [TE]
Low Insertion Loss and Noise Figure; 低插入损耗和噪声系数
| 型号： | MADL-011008 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Low Insertion Loss and Noise Figure |
| 文件： | 总4页 (文件大小：109K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Rev. V1
Features
Functional Schematic
Low Insertion Loss and Noise Figure
+40 dBm Peak and +30 dBm CW Power
+10 dBm P1dB Compression Point
+16 dBm Flat Leakage
Lead-Free 1.2 x 1.5 mm 6-Lead PDFN Package
RoHS Compliant* and 260°C Reflow Compatible
Description
The MADL-011008 is a silicon PIN limiter with small
I-region length specifically designed for medium
signal applications. The limiter is available in a
lead-free 1.2 x 1.5 mm 6-lead PDFN package. The
limiter is ideally designed to provide low insertion
loss, at zero bias, as well as low flat leakage power
with fast signal response/recovery times.
Pin Configuration
Pin No.
Pin Name
N/C
Description
The MADL-011008 PIN limiter is designed for use in
passive limiter control circuits to protect sensitive
receiver components such as low noise amplifiers
(LNA), detectors, and mixers.
1
2
No Connection
RF Ground
No Connection
No Connection
RF Input
GND
N/C
3
4
N/C
Ordering Information1,2
5
IN
6
N/C
No Connection
GND
Part Number
Package
73
Pad
MADL-011008-141200
MADL-011008-14120T
MADL-011008-001SMB
Bulk Packaging
Tape and Reel
Sample Test Board
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
Handling Procedures
Please observe the following precautions to avoid
damage:
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose pieces.
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Rev. V1
Electrical Specifications: Freq 2.7 to 3.0 GHz, TA = 25°C, Z0 = 50 Ω
Parameter
Insertion Loss
Test Conditions
Units
dB
Min.
—
Typ.
0.15
20
Max.
—
0 dBm
Input Return Loss
Output Return Loss
P1dB
0 dBm
dB
—
—
0 dBm
dB
—
20
—
—
Pulse Width 1 µSec, Duty Cycle 0.1%
—
dBm
dBm
dBm
dBm
—
10
—
Peak Incident Power
CW Incident Power
CW Flat Leakage
—
40
—
—
30
—
Incident Power = +24 dBm
—
16
—
To within 1 dB of final insertion loss
Peak Incident Power = +30 dBm
Pulse Width 1 µSec, Duty Cycle 0.1%
Recovery Time
Spike Leakage
ns
—
—
50
—
—
+30 dBm Pin,
Pulse Width 1 µSec, Duty Cycle 0.1%
erg
0.5
IP3
Pin -5 dBm/tone, 10 MHz Spacing
Pin -5 dBm/tone
dBm
dBm
V
—
—
—
—
30
43
—
—
IP2
Forward Voltage
Reverse Current
Forward current = 10 mA
Reverse voltage = 20 volts
0.9
0.1
1.1
10
µA
Absolute Maximum Ratings4,5
Application Schematic
Absolute
Maximum
Parameter
Peak Incident Power
Pulse Width 1 µSec, Duty Cycle 0.1%
43 dBm
33 dBm
CW Incident Power
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
Recommended Board Layout
Parts List
Component
C1 - C2
L1
Value
68 pF
5.1 nH
Package
0402
0402
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the puct(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and oduct information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Rev. V1
Typical Performance Curves
Insertion Loss
Pin vs. Pout @ 2.85 GHz
20
0.0
+25°C
-40°C
+85°C
15
-0.1
-0.2
10
5
+25°C
-40°C
+85°C
-0.3
0
-0.4
0
5
10
15
20
25
30
2.70
2.75
2.80
2.85
2.90
2.95
3.00
Input Power (dBm)
Frequency (GHz)
Output Return Loss
Input Return loss
-10
-10
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-15
-20
-25
-30
-15
-20
-25
-30
2.70
2.75
2.80
2.85
2.90
2.95
3.00
2.70
2.75
2.80
2.85
2.90
2.95
3.00
Frequency (GHz)
Frequency (GHz)
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Rev. V1
Lead-Free 1.2 x 1.5 mm 6-Lead PDFN†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
4
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
相关型号：
©2020 ICPDF网 联系我们和版权申明