MADL-011014-001SMB [TE]
320 W Peak Power Limiter;
| 型号： | MADL-011014-001SMB |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | 320 W Peak Power Limiter |
| 文件： | 总5页 (文件大小：746K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MADL-011014
320 W Peak Power Limiter
1 - 2 GHz
Rev. V4
Features
Functional Schematic
+55 dBm Peak Power Handling @ +85°C
+53 dBm CW Power Handling @ +85°C
0.35 dB Insertion Loss (1.2 - 1.4 GHz)
19 dB Return Loss (1.2 - 1.4 GHz)
+19 dBm Flat Leakage Power
Lead-Free 10.1 x 6.2 x 3.2 mm3 Package
RoHS* Compliant and 260oC Reflow Compatible
Hermetic Seal
2
1
RFIN
RFOUT
Description
3
GND
The MADL-011014 is a lead-free surface mount,
high power limiter which integrates the equivalent of
19 PIN, Schottky, limiter diodes, capacitors,
inductors, and resistors in a compact ceramic
package. This device provides superior low and high
signal performance from 1 - 2 GHz without DC bias.
Top view
Pin Configuration
Pin No.
Pin Name
Description
The MADL-011014 is ideally suitable for higher peak
and CW power receiver-protector microwave circuits
applications where higher performance surface
mount limiter assemblies are required.
1
RFIN
RFOUT
RF Input
2
3
RF Output
Ground
Paddle2
2. The exposed paddle centered on the package bottom must be
connected to RF, DC, and thermal ground.
Ordering Information
Part Number
Package
MADL-011014-001000
Hermetic Seal1
Sample board
(Hermetic Seal Limiter)
MADL-011014-001SMB
1. Hermetic Seal provides fine leak rate < 5x10-8 atm·cc/s.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011014
320 W Peak Power Limiter
1 - 2 GHz
Rev. V4
Electrical Specifications: TA = +25°C, Z0 = 50 Ω (unless otherwise defined)
Parameter
Test Conditions
Units
Min.
Typ.
Max.
-10 dBm, 1.2 - 1.4 GHz
-10 dBm, 1.0 - 2.0 GHz
0.35
0.8
0.6
—
Insertion Loss
dB
—
-10 dBm, 1.2 - 1.4 GHz
-10 dBm, 1.0 - 2.0 GHz
19
10
Return Loss
dB
—
—
P1dB Input Compression Power
C.W. Incident Power3
1.3 GHz
dBm
dBm
dBm
dBm
—
—
—
—
+12
55
—
—
—
—
1.3 GHz
Peak Incident Power3
3 ms pulse, 10% duty cycle, 1.3 GHz
3 ms pulse, 10% duty cycle, 1.3 GHz
55
Flat Leakage Power
19
+55 dBm, 3 ms pulse, 10% duty cycle,
1.3 GHz
Spike Leakage Power
Spike Leakage Energy
dBm
ergs
µs
—
—
—
—
28
0.5
3.5
20
—
—
—
—
+55 dBm, 3 ms pulse, 10% duty cycle,
1.3 GHz
Recovery Time
(3 dB of Insertion Loss)
+55 dBm, 3 ms pulse, 10% duty cycle,
1.3 GHz
Input 3rd Order
Intermodulation Products (IIP3)
-10 dBm, F1 = 1.500 GHz, F2 = 1.510 GHz
dBm
3. Incident power ratings defined with 1.2:1 source VSWR and 1.2:1 maximum load VSWR.
Absolute Maximum Ratings4,5
Typical Performance Curve
Pulse Width vs. Peak Input Power @ +85°C
(10% Duty Cycle, 1.3 GHz)
Parameter
Absolute Maximum
+55 dBm
Peak Incident Power
3 ms pulse, 10% duty @ +85°C
6
5
4
3
2
1
0
CW Incident Power @ +85°C
Junction Temperature6
Operating Temperature
Storage Temperature
+53 dBm
175°C
-65°C to +125°C
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. MACOM does not recommend sustained operation near these
survivability limits.
53
54
55
56
57
58
59
60
Peak Incident Power (dBm)
6. Operating at nominal conditions with TJ ≤ +175°C will ensure
MTTF > 1 x 106 hours.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011014
320 W Peak Power Limiter
1 - 2 GHz
Rev. V4
Typical Performance Curves
Insertion Loss vs. Frequency
0.0
Input Return Loss vs. Frequency
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-0.2
-0.4
-0.6
-0.8
-1.0
-5
-10
-15
-20
-25
1.0
1.2
1.4
1.6
1.8
2.0
60
56
1.0
1.2
1.4
1.6
1.8
2.0
60
56
Frequency (GHz)
Frequency (GHz)
Pulsed Flat Leakage Power vs. PIN
(3 ms Pulse, 10% Duty Cycle, 1.3 GHz)
CW Flat Leakage Power vs. PIN @ 1.3 GHz
25
25
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
20
20
15
15
10
5
10
5
0
0
0
10
20
30
40
50
0
10
20
30
40
50
Incident Power (dBm)
Incident Power (dBm)
Pulsed Spike Leakage Power vs. PIN
(3 ms Pulse, 10% Duty Cycle, 1.3 GHz)
Pulsed 3 dB Recovery Time vs. PIN
(3 ms Pulse, 10% Duty Cycle, 1.3 GHz)
30
10000
+25°C
-40°C
+85°C
28
26
1000
24
22
20
+25°C
-40°C
+85°C
100
44
46
48
50
52
54
44
46
48
50
52
54
Incident Power (dBm)
Incident Power (dBm)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011014
320 W Peak Power Limiter
1 - 2 GHz
Rev. V4
SMB Layout
SMB Layout
Part
RF Connector
Limiter
Quantity
Part Number
2
1
Johnson 142-0701-851
MADL-011014
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These devices are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these HBM Class 1C
devices.
Lead-Free 10.1 x 6.2 x 3.2 mm3 2-Lead package†
† Reference Application Note S2083 for lead-free solder reflow recommendations.
Plating is Au over NI over Cu.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011014
320 W Peak Power Limiter
1 - 2 GHz
Rev. V4
Application Section
Transmit-Receive Block Diagram
using the L Band MADL-011014 Limiter
Ant
Circulator
MAAL-010705
Circulator
MAGX-001214
LNA
GaN PA
50 Ω High
Power Load
MADL-011014
Limiter
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号：
©2020 ICPDF网 联系我们和版权申明