MADL-011012-001SMB [TE]

360 W CW Power Limiter;
MADL-011012-001SMB
型号: MADL-011012-001SMB
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

360 W CW Power Limiter

文件: 总6页 (文件大小:789K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MADL-011012  
360 W CW Power Limiter  
0.3 - 1.0 GHz  
Rev. V1  
Features  
Functional Schematic  
55.6 dBm CW Power Handling @ +25°C  
54 dBm CW Power Handling @ +85°C  
0.2 dB Insertion Loss (400 - 500 MHz)  
25 dB Return Loss (400 - 500 MHz)  
21 dBm Flat Leakage Power  
Lead-Free 10.1 x 6.2 x 3.2 mm3 Package  
RoHS* Compliant  
2
1
RFIN  
RFOUT  
Hermetic Seal1  
Description  
The MADL-011012 is a lead-free surface mount,  
high power limiter which integrates the equivalent of  
20 PIN, Schottky, limiter diodes, capacitors,  
inductors, and resistors in a compact ceramic  
package. This device provides superior low and high  
signal performance from 0.3 - 1.0 GHz without DC  
bias.  
3
GND  
Top view  
Pin Configuration  
Pin No.  
Pin Name  
Description  
The MADL-011012 is ideally suitable for higher peak  
and CW power receiver-protector microwave circuits  
applications where higher performance surface  
mount limiter assemblies are required.  
1
RFIN  
RFOUT  
RF Input  
2
3
RF Output  
Ground  
Paddle2  
Ordering Information  
2. The exposed paddle centered on the package bottom must  
be connected to RF, DC, and thermal ground.  
Part Number  
MADL-011012-001  
MADL-011012-001SMB  
Package  
bulk  
Sample Test Board  
1. Hermetic Seal provides fine leak rate < 5x10-8 atm·cc/s.  
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.  
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.  
Visit www.macom.com for additional data sheets and product information.  
For further information and support please visit:  
https://www.macom.com/support  
MADL-011012  
360 W CW Power Limiter  
0.3 - 1.0 GHz  
Rev. V1  
Electrical Specifications: TA = +25°C, Z0 = 50 Ω (unless otherwise defined)  
Parameter  
Test Conditions  
Units  
Min.  
Typ.  
Max.  
-10 dBm, 300 MHz  
-10 dBm, 500 MHz  
-10 dBm, 1000 MHz  
0.25  
0.20  
0.55  
0.35  
Insertion Loss  
dB  
10 dBm, 300 MHz  
-10 dBm, 500 MHz  
-10 dBm, 1000 MHz  
20  
25  
11  
Return Loss  
dB  
P1dB Input Compression Power  
CW Incident Power3  
500 MHz  
dBm  
dBm  
dBm  
dBm  
13  
55.6  
55.6  
20  
500 MHz  
Peak Incident Power3  
Flat Leakage Power  
1 ms pulse, 10% duty cycle, 500 MHz  
1 ms pulse, 10% duty cycle, 500 MHz  
+55.6 dBm, 1 ms pulse, 10% duty cycle,  
500 MHz  
Spike Leakage Power  
Spike Leakage Energy  
dBm  
ergs  
µs  
29  
0.5  
3
+55.6 dBm, 1 ms pulse, 10% duty cycle,  
500 MHz  
Recovery Time  
(3 dB of Insertion Loss)  
+55.6 dBm, 1 ms pulse, 10% duty cycle,  
500 MHz  
Input 3rd Order Intermodulation (IIP3)  
-10 dBm, F1 = 500 MHz, F2 = 510 MHz  
dBm  
29  
3. Incident power ratings defined with 1.2:1 source VSWR and 1.2:1 maximum load VSWR.  
Absolute Maximum Ratings4,5  
Typical Performance Curve  
Pulse Width vs. Peak Input Power @ +85°C  
(10% Duty Cycle, 500 MHz)  
Parameter  
Absolute Maximum  
Peak Incident Power  
2 ms pulse, 10% duty @ +85°C  
6
5
4
3
2
1
0
55.6 dBm  
54 dBm  
CW Incident Power @ +85°C  
Junction Temperature6  
Operating Temperature  
Storage Temperature  
175°C  
-65°C to +125°C  
-65°C to +150°C  
4. Exceeding any one or combination of these limits may cause  
permanent damage to this device.  
5. MACOM does not recommend sustained operation near these  
survivability limits.  
54  
55  
56  
57  
Peak Incident Power (dBm)  
6. Operating at nominal conditions with TJ ≤ +175°C will ensure  
MTTF > 1 x 106 hours.  
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.  
Visit www.macom.com for additional data sheets and product information.  
For further information and support please visit:  
https://www.macom.com/support  
MADL-011012  
360 W CW Power Limiter  
0.3 - 1.0 GHz  
Rev. V1  
Typical Performance Curves  
Insertion Loss vs. Frequency  
Input Return Loss vs. Frequency  
0.0  
0
-0.1  
-0.2  
-0.4  
-0.5  
-0.6  
-10  
-20  
-30  
-40  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
1.0  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
1.0  
Frequency (GHz)  
Frequency (GHz)  
Pulsed Flat Leakage Power vs. PIN  
(1 ms Pulse, 10% Duty Cycle, 500 MHz)  
CW Flat Leakage Power vs. PIN @ 500 MHz  
25  
20  
15  
10  
5
25  
20  
15  
10  
5
15  
25  
35  
45  
55  
15  
25  
35  
45  
55  
Input Power (dBm)  
Input Power (dBm)  
Pulsed Spike Leakage Power vs. PIN  
(1 ms Pulse, 10% Duty Cycle, 500 MHz)  
Pulsed 1 dB Recovery Time vs. PIN  
(1 ms Pulse, 10% Duty Cycle, 500 MHz)  
30  
28  
26  
24  
22  
20  
5
4
3
2
1
0
45  
47  
49  
51  
53  
55  
45  
47  
49  
51  
53  
55  
Input Power (dBm)  
Input Power (dBm)  
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.  
Visit www.macom.com for additional data sheets and product information.  
For further information and support please visit:  
https://www.macom.com/support  
MADL-011012  
360 W CW Power Limiter  
0.3 - 1.0 GHz  
Rev. V1  
SMB Layout  
SMB Layout  
Part  
Quantity  
Part Number  
RF Connector  
Limiter  
2
1
Johnson 142-0701-851  
MADL-011012  
Handling Procedures  
Please observe the following precautions to avoid  
damage:  
Static Sensitivity  
These devices are sensitive to electrostatic  
discharge (ESD) and can be damaged by static  
electricity. Proper ESD control techniques should  
be used when handling these HBM Class 1B  
devices.  
Lead-Free 10.1 x 6.2 x 3.2 mm3 2-Lead package†  
NOTES:  
REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION.  
ALL DIMENSIONS SHOWN AS INCHES/MM.  
Reference Application Note S2083 for lead-free solder reflow recommendations.  
Plating is Au over Ni over Cu.  
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.  
Visit www.macom.com for additional data sheets and product information.  
For further information and support please visit:  
https://www.macom.com/support  
MADL-011012  
360 W CW Power Limiter  
0.3 - 1.0 GHz  
Rev. V1  
Application Section  
Transmit-Receive Block Diagram  
using the UHF Band MADL-011012 Limiter  
Ant  
Circulator  
Circulator  
LNA  
PA  
50 Ω High  
Power Load  
MADL-011012  
Limiter  
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.  
Visit www.macom.com for additional data sheets and product information.  
For further information and support please visit:  
https://www.macom.com/support  
MADL-011012  
360 W CW Power Limiter  
0.3 - 1.0 GHz  
Rev. V1  
M/A-COM Technology Solutions Inc. All rights reserved.  
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")  
products. These materials are provided by MACOM as a service to its customers and may be used for  
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or  
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM  
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to  
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update  
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future  
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,  
to any intellectual property rights is granted by this document.  
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR  
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR  
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR  
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR  
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY  
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN  
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,  
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.  
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM  
customers using or selling MACOM products for use in such applications do so at their own risk and agree to  
fully indemnify MACOM for any damages resulting from such improper use or sale.  
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.  
Visit www.macom.com for additional data sheets and product information.  
For further information and support please visit:  
https://www.macom.com/support  

相关型号:

MADL-011014-001000

320 W Peak Power Limiter
TE

MADL-011014-001SMB

320 W Peak Power Limiter
TE

MADL-011014_15

320 W Peak Power Limiter
TE

MADL-011015

250 W Peak Power Limiter
TE

MADL-011015-001

250 W Peak Power Limiter
TE

MADL-011015-001SMB

250 W Peak Power Limiter
TE

MADL-011021-000SMB

PIN-Schottky Anti-Parallel Diode Limiter
TE

MADL-011021-14150T

PIN-Schottky Anti-Parallel Diode Limiter
TE

MADL-011021-14150T_15

PIN-Schottky Anti-Parallel Diode Limiter
TE

MADL-011021-14150T_16

PIN-Schottky Anti-Parallel Diode Limiter
TE

MADL-011021-14210G

Silicon PIN Limiter Diodes
TE

MADL-011023-14150T

DIODE LIMITER 10MHZ-12GHZ 6TDFN
TE