MASW-000822-12770T_15 [TE]
HMIC PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications;
| 型号： | MASW-000822-12770T_15 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | HMIC PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications |
| 文件： | 总6页 (文件大小：812K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V6
Features
Functional Schematic
Exceptional Broadband Performance
Suitable for Higher Power WiMax & WLAN
Applications
N/C
N/C N/C ANT
14
Lower Loss:
N/C
N/C
Rx
N/C
1
Tx = 0.40 dB @ 3.8 GHz, 22mA
Rx = 0.60 dB @ 3.8 GHz, 22mA
Higher Isolation:
Rx-Tx = 21 dB @ 3.8 GHz
Tx-Rx = 26 dB @ 3.8 GHz
Higher RF Input Power = 10 W C.W.
( Tx-Ant Port )
N/C
Tx
3
10
N/C
N/C
Higher IIP3 = 65 dBm ( Tx-Ant Port ).
Lower EVM (OFDM):
N/C
N/C N/C N/C
< 1.0% @ 8W Pin, ( Tx-Ant Port )
Lead-Free 3 mm 16-Lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Pin Configuration 1
Pin
Function
Pin
Function
1
2
3
4
5
6
7
8
N/C
N/C
Tx
9
N/C
Rx
Description
10
11
12
13
14
15
16
MA-COM’s MASW-000822-12770T is a Broadband,
high linearity, common anode PIN diode SPDT
switch in a lead-free 3 mm 16-lead PQFN package.
The MASW-00822-1277OT is ideally suited for 0.05
- 6.0 GHz applications, including WiMax & WLAN.
N/C
N/C
N/C
Ant
N/C
N/C
N/C
N/C
N/C
N/C
N/C
This SP2T switch offers excellent isolation to loss
ratio for both Tx and Rx states. The PIN diode
provides exceptional 10 W C.W power handling
coupled with 65 dBm IIP3 for maximum switch
performance @ 3.8GHz.
1. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
This MASW-000822-1277OT incorporates a PIN
diode die fabricated with M/A-COM’s patented
Silicon-Glass HMICTM process. This chip features
two silicon pedestals embedded in a low loss, low
dispersion glass. The diodes are formed on the top
of each pedestal. The topside is fully encapsulated
with silicon nitride and has an additional polymer
passivation layer. These polymer protective coatings
prevent damage and contamination during handling
and assembly.
Ordering Information 2
Part Number
Package
MASW-000822-1277OT
MASW-000822-001SMB
1000 piece reel, 7 inch
Sample Board
2. Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V6
Electrical Specifications: TA = 25°C, PIN = 0 dBm, Z0 = 50 Ω
Parameter
Conditions
Units
Min.
Typ.
Max.
Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA
2.3 - 2.7 GHz
—
—
—
0.55
0.60
0.80
0.70
0.75
0.90
Insertion Loss, Rx
dB
3.3 - 3.8 GHz
4.9 - 5.9 GHz
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA
2.3 - 2.7 GHz
—
—
—
0.35
0.40
0.50
0.45
0.55
0.60
Insertion Loss, Tx
Isolation, Tx to RX
Isolation, Rx to TX
Input Return Loss Tx
Input Return Loss Rx
dB
dB
dB
dB
dB
3.3 - 3.8 GHz
4.9 - 5.9 GHz
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA
2.3 - 2.7 GHz
27.0
24.5
21.0
29.5
26.5
21.5
—
—
—
3.3 - 3.8 GHz
4.9 - 5.9 GHz
Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA
2.3 - 2.7 GHz
22.5
19.5
17.5
24.5
21.5
17.5
—
—
—
3.3 - 3.8 GHz
4.9 - 5.9 GHz
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA
2.3 - 2.7 GHz
—
—
—
17
18
18
—
—
—
3.3 - 3.8 GHz
4.9 - 5.9 GHz
Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA
2.3 - 2.7 GHz
—
—
—
17
18
18
—
—
—
3.3 - 3.8 GHz
4.9 - 5.9 GHz
Electrical Specifications: F = 3.5 GHz, TA = 25°C, Z0 = 50 Ω 3,4,5
Parameter
Conditions
Units
Min.
Typ.
Max.
Tx Input P0.1dB
Tx Input P1dB
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Tx To Antenna
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Tx To Antenna
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = + 30 dBm
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = + 30 dBm
dBm
dBm
dBc
dBc
—
—
—
—
40
45
—
—
—
Tx 2nd Harmonic
Tx 3rd Harmonic
-68
-84
Tx Input
3rd Order Intercept Point
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = + 10 dBm
F1 = 3.500 GHz, F2 = 3.510 GHz
dBm
—
65
—
Tx C.W. Input Power
Rx C.W. Input Power
Tx EVM (OFDM)
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, F= 4.0 GHz
Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA, F= 4.0 GHz
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = +39 dBm
dBm
dBm
%
—
—
—
—
—
40
33
—
0.8
Tx EVM (OFDM)
Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = +40 dBm
%
—
—
1.2
( 10-90% RF Voltage)
Tx = +5.0 V@ +22 mA, Rx =+12V @ 0 mA
1MHz Rep Rate in Modulating Mode
Tx RF Switching Speed
ns
<500
—
3. Data taken at device RF leads.
4. Typical PIN diode forward voltage = +0.8 V @ 10 mA, +0.85 V @22 mA.
5. Typical PIN diode reverse voltage = +12.0 V
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Absolute Maximum Ratings 6
Rev. V6
Cross Section View of M/A-Com PCB
@ TA = +25 °C (unless otherwise specified)
Parameter
Absolute Maximum
+ 100 mA
Forward Current
Reverse Voltage
-100 V
Operating Temperature
Storage Temperature
Junction Temperature
Tx Incident C.W. Power
Tx Peak Incident Power
Rx Incident C.W. Power
-40 °C to +85 °C
-55 °C to +150 °C
+175 °C
10 W C.W.
20 W, 3 µS P.W., 1% Duty
2 W C.W.
6. Exceeding these limits may cause permanent damage.
D.C. Bias to RF Truth Table
RF State
TTL & D.C. Bias Conditions
Voltage at Common Anode
Low Loss Tx-Ant &
Isolation Tx-Rx
TTL = 1
+ 0.9 V
+ 5V @ 22 mA ( Tx ), + 12V @ 0 mA ( Rx )
Low Loss Ant-Rx &
Isolation Rx-Tx
TTL = 0
+ 0.9 V
+ 5V @ 22 mA ( Rx ), + 12V @ 0 mA ( Tx )
Driver and SP2T Schematic with Positive Voltage 7,8,9,10,11
Ant
DC Block
LBias
R5
+5 V
180 Ω
Bypass
DC Block
DC Block
TX
RX
SP2T
Bypass
LBias
LBias
Bypass
MADR-008888-000100
Driver
Logic Input
Ground
7. Forward Bias Diode Voltage, ΔVf @ 22 mA = + 0.9 V.
8. Reverse Bias Diode = | - ( +12 V - +0.9 V ) | = | - 11.1 | V.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V6
Typical Performance Curves: TA = 25°C, Z0 = 50 Ω
Insertion Loss
Isolation
-15
0.0
-20
-25
-30
-35
-40
TX
RX
-0.2
-0.4
-0.6
-0.8
-1.0
TX
RX
-45
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
EVM
Tx and RX Return Loss
1.2
-20
1.1
1.0
0.9
0.8
0.7
0.6
TX
RX
SPDT Series T/R Switch
System EVM Baseline
-25
-30
-35
-40
0.5
15
20
25
30
35
40
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Incident Power (dBm)
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V6
Tx Diode Junction Temperature vs. C.W. Input Power
@ 4.0 GHz , Tj = 175°C
Handling Procedures
Please observe the following precautions to avoid
damage:
350
325
300
275
250
Static Sensitivity
These devices are rated at Class 1B Human Body.
Proper ESD control techniques should be used
when handling these devices.
225
Max Tj
(40.1 dBm)
200
175
150
125
100
75
50
25
0
20
25
30
P
35
(dBm)
40
45
IN
This device is not for saturation power application. Exceeding
power dissipation maximum rating might result in device failure.
Lead-Free 3 mm 16-Lead PQFN†
† Reference Application Note S2803 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V6
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号：
MASW-000822-1277OT
HMICTM PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TE
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TE
MASW-000834-000SMB
Application Note on Sample Board Operation of the MASW-000834-13560T T/R Switch
TE
MASW-000834-001SMB
HMIC PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TE
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TE
MASW-000834_13560T_15
HMIC PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TE
©2020 ICPDF网 联系我们和版权申明