MD-156_V4 [TE]
Flatpack Double-Balanced Mixer,; 扁平双平衡混频器,![MD-156_V4](http://pdffile.icpdf.com/pdf1/p00189/img/icpdf/MD-156_1068020_icpdf.jpg)
型号: | MD-156_V4 |
厂家: | ![]() |
描述: | Flatpack Double-Balanced Mixer, |
文件: | 总3页 (文件大小:71K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MD-156
Flatpack Double-Balanced Mixer,
0.6 - 3 GHz
Rev. V4
Features
FP-2
•
•
•
•
Noise Figure: 6.5 Typical
LO-RF Isolation: 30 dB Typical
Impedance: 50 Ohms Nominal
Maximum Input Power: 300 mW max. @ 25°C,
Derated linearly to 85°C @ 3.2 mW/°C
IF Port Current: 50 mA Max.
•
•
MIL-STD-883 Screening Available
Description
Transformers convert the LO and RF paths to bal-
anced lines connecting to a low barrier, Schottky
diode ring quad. These transformers help provide
excellent isolation between ports. Conversion Loss
is low. The direct connection of the IF port to the
diode quad allows these mixers to be used as phase
detectors and bi-phase modulators.
Pin Configuration
Pin No.
Function
GND
GND
GND
IF
Pin No.
Function
1
2
3
4
5
6
7
8
LO
GND
GND
RF
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MD-156
Flatpack Double-Balanced Mixer,
0.6 - 3 GHz
Rev. V4
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Frequency Range
RF, LO Ports
IF Port
600 - 3000
DC - 3000
MHz
MHz
—
—
—
—
—
—
Conversion Loss and
SSB Noise Figure
800 - 2000 MHz
600 - 3000 MHz
dB
dB
—
—
—
—
9.0
10.0
Isolation
LO to RF
LO to IF
Negative
600 – 2000 MHz
2000 - 3000 MHz
dB
dB
25
20
—
—
—
—
600 – 2000 MHz
2000 - 3000 MHz
dB
dB
20
17
—
—
—
—
DC Polarity
DC Offset
RF Input
—
—
—
—
—
—
—
mV
<6
1 dB Compression
1 dB Desensitization
dBm
dBm
—
—
0
-4
—
—
SSB Noise Figure
Within 1 dB of Conversion Loss
Max.
—
—
—
—
—
Typical Two Tone IM
Ratio
With –10 dBm input, each input 25
MHz and 35 MHz IF
800 MHz
1500 MHz
2500 MHz
dB
dB
dB
—
—
—
44
40
40
—
—
—
1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MD-156
Flatpack Double-Balanced Mixer,
0.6 - 3 GHz
Rev. V4
Typical Performance Curves
Ordering Information
Part Number
Package
MD-156 PIN
FP-2
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明