SN54LV04W [TI]
LV/LV-A/LVX/H SERIES, HEX 1-INPUT INVERT GATE, CDFP14, CERAMIC, DFP-14;型号: | SN54LV04W |
厂家: | TEXAS INSTRUMENTS |
描述: | LV/LV-A/LVX/H SERIES, HEX 1-INPUT INVERT GATE, CDFP14, CERAMIC, DFP-14 CD 输入元件 逻辑集成电路 |
文件: | 总5页 (文件大小:87K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN54LV04, SN74LV04
HEX INVERTERS
SCLS184C – FEBRUARY 1993 – REVISED APRIL 1996
SN54LV04 . . . J OR W PACKAGE
SN74LV04 . . . D, DB, OR PW PACKAGE
(TOP VIEW)
EPIC (Enhanced-Performance Implanted
CMOS) 2-µ Process
Typical V
< 0.8 V at V , T = 25°C
(Output Ground Bounce)
OLP
CC
A
1A
1Y
V
CC
1
2
3
4
5
6
7
14
13
12
11
Typical V
> 2 V at V , T = 25°C
(Output V
Undershoot)
6A
6Y
5A
OHV
CC
OH
A
2A
ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model
(C = 200 pF, R = 0)
2Y
3A
10 5Y
9
8
3Y
4A
4Y
GND
Latch-Up Performance Exceeds 250 mA
Per JEDEC Standard JESD-17
SN54LV04 . . . FK PACKAGE
(TOP VIEW)
Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW), and
Ceramic Flat (W) Packages, Ceramic Chip
Carriers (FK), and Ceramic (J) 300-mil DIPs
3
2
1
20 19
18
6Y
NC
5A
2A
NC
2Y
4
5
6
7
8
17
16
description
15 NC
14
9 10 11 12 13
NC
3A
These hex inverters are designed for 2.7-V to
5.5-V V operation.
5Y
CC
The ’LV04 contain six independent inverters.
These devices perform the Boolean function
Y = A.
NC – No internal connection
The SN74LV04 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count
and functionality of standard small-outline packages in less than half the printed-circuit-board area.
The SN54LV04 is characterized for operation over the full military temperature range of –55°C to 125°C. The
SN74LV04 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each inverter)
INPUT
A
OUTPUT
Y
H
L
L
H
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
Copyright 1996, Texas Instruments Incorporated
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LV04, SN74LV04
HEX INVERTERS
SCLS184C – FEBRUARY 1993 – REVISED APRIL 1996
†
logic symbol
logic diagram, each inverter (positive logic)
1
1A
3
2
4
1Y
2Y
3Y
4Y
5Y
6Y
A
Y
2A
5
6
3A
9
8
4A
11
10
12
5A
13
6A
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for D, DB, J, PW, and W packages.
‡
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
+ 0.5 V
+ 0.5 V
I
CC
CC
Output voltage range, V (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
O
Input clamp current, I (V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
IK
I
I
CC
Output clamp current, I
(V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
OK
O O CC
Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through V
Maximum power dissipation at T = 55°C (in still air) (see Note 3): D package . . . . . . . . . . . . . . . . . . . 1.25 W
O
O
CC
CC
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
A
DB or PW package . . . . . . . . . . . . . 0.5 W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. This value is limited to 7 V maximum.
3. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.
recommended operating conditions (see Note 4)
SN54LV04
SN74LV04
UNIT
V
MIN
2.7
2
MAX
MIN
2.7
2
MAX
V
V
Supply voltage
5.5
5.5
CC
V
CC
V
CC
V
CC
V
CC
= 2.7 V to 3.6 V
= 4.5 V to 5.5 V
= 2.7 V to 3.6 V
= 4.5 V to 5.5 V
High-level input voltage
V
IH
3.15
3.15
0.8
0.8
V
IL
Low-level input voltage
V
1.65
1.65
V
V
Input voltage
0
0
V
0
0
V
V
V
I
CC
CC
Output voltage
V
CC
–6
V
CC
–6
O
V
CC
V
CC
V
CC
V
CC
= 2.7 V to 3.6 V
= 4.5 V to 5.5 V
= 2.7 V to 3.6 V
= 4.5 V to 5.5 V
I
High-level output current
Low-level output current
mA
mA
OH
OL
–12
6
–12
6
I
12
12
100
85
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
0
100
125
0
ns/V
T
A
–55
–40
°C
NOTE 4: Unused inputs must be held high or low to prevent them from floating.
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LV04, SN74LV04
HEX INVERTERS
SCLS184C – FEBRUARY 1993 – REVISED APRIL 1996
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54LV04
TYP
SN74LV04
TYP
†
PARAMETER
TEST CONDITIONS
V
CC
UNIT
MIN
MAX
MIN
MAX
I
I
I
I
I
I
= –100 µA
MIN to MAX
3 V
V
–0.2
V
–0.2
OH
OH
OH
OL
OL
OL
CC
2.4
3.6
CC
2.4
3.6
V
V
= –6 mA
= –12 mA
= 100 µA
= 6 mA
V
OH
4.5 V
MIN to MAX
3 V
0.2
0.4
0.55
±1
0.2
0.4
0.55
±1
V
OL
= 12 mA
4.5 V
3.6 V
I
I
V = V
or GND
or GND
µA
I
I
CC
CC
5.5 V
±1
±1
3.6 V
20
20
V = V
I = 0
O
µA
µA
pF
CC
I
5.5 V
20
20
One input at V
CC
Other inputs at V
– 0.6 V
or GND
I
500
500
CC
3 V to 3.6 V
3.3 V
CC
2.5
1.8
2.5
1.8
C
V = V
or GND
CC
i
I
5 V
†
For conditions shown as MIN or MAX, use the appropriate values under recommended operating conditions.
switching characteristics over recommended operating free-air temperature range, C = 50 pF
L
(unless otherwise noted) (see Figure 1))
SN54LV04
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
V
CC
MIN
= 5 V ± 0.5 V
V
CC
MIN
= 3.3 V ± 0.3 V
V
CC
MIN
= 2.7 V
MAX
15
UNIT
TYP
MAX
TYP
MAX
12
t
pd
A
Y
4
9
6
ns
switching characteristics over recommended operating free-air temperature range, C = 50 pF
L
(unless otherwise noted) (see Figure 1)
SN74LV04
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
V
CC
MIN
= 5 V ± 0.5 V
V
CC
MIN
= 3.3 V ± 0.3 V
V
CC
MIN
= 2.7 V
MAX
15
UNIT
TYP
MAX
TYP
MAX
12
t
pd
A
Y
4
9
6
ns
operating characteristics, T = 25°C
A
PARAMETER
TEST CONDITIONS
V
CC
TYP
UNIT
3.3 V
5 V
18
C
Power dissipation capacitance per inverter
C
= 50 pF, f = 10 MHz
pF
pd
L
26
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LV04, SN74LV04
HEX INVERTERS
SCLS184C – FEBRUARY 1993 – REVISED APRIL 1996
PARAMETER MEASUREMENT INFORMATION
V
z
TEST
S1
S1
Open
1 kΩ
From Output
Under Test
t
t
/t
Open
PLH PHL
/t
t
V
z
GND
GND
PLZ PZL
/t
PHZ PZH
C
= 50 pF
L
1 kΩ
(see Note A)
WAVEFORM
CONDITION
V
= 4.5 V
V
= 2.7 V
CC
to 5.5 V
CC
to 3.6 V
1.5 V
2.7 V
6 V
V
m
0.5 × V
CC
V
i
V
z
V
CC
LOAD CIRCUIT
2 × V
CC
V
i
V
m
Timing Input
0 V
t
w
t
t
su
h
V
i
V
i
V
m
V
m
Input
V
m
V
m
Data Input
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
i
i
Output
Control
V
V
m
m
Input
V
m
V
m
0 V
0 V
V
t
PZL
t
t
t
PHL
PLH
t
PLZ
Output
Waveform 1
0.5 × V
z
OH
V
V
V
m
V
m
m
Output
Output
V
+ 0.3 V
– 0.3 V
S1 at V
(see Note B)
OL
z
V
OL
V
OL
t
PHZ
t
PLH
t
PZH
PHL
Output
Waveform 2
S1 at GND
V
V
V
OH
OH
V
OH
V
V
m
m
m
0 V
OL
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. includes probe and jig capacitance.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.
O
r
f
D. The outputs are measured one at a time with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
are the same as t
are the same as t
.
dis
en
.
pd
PLZ
PZL
PLH
PHZ
PZH
PHL
.
Figure 1. Load Circuit and Voltage Waveforms
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1999, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明