概述
规格参数
数据手册SN7ALS1035D 概述
HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS 与集电极开路输出HEX同相缓冲区 栅极
SN7ALS1035D 规格参数
| 生命周期： | Obsolete | 零件包装代码： | SOIC |
| 包装说明： | SOP, | 针数： | 14 |
| Reach Compliance Code： | unknown | HTS代码： | 8542.39.00.01 |
| 风险等级： | 5.82 | 其他特性： | IOH = 0.1MA @ VOH = 5.5V; IOL = 12MA @ VOL = 0.4V |
| 系列： | ALS | JESD-30 代码： | R-PDSO-G14 |
| 长度： | 8.65 mm | 逻辑集成电路类型： | BUFFER |
| 功能数量： | 6 | 输入次数： | 1 |
| 端子数量： | 14 | 最高工作温度： | 70 °C |
| 最低工作温度： | 输出特性： | OPEN-COLLECTOR | |
| 封装主体材料： | PLASTIC/EPOXY | 封装代码： | SOP |
| 封装形状： | RECTANGULAR | 封装形式： | SMALL OUTLINE |
| 传播延迟（tpd）： | 30 ns | 认证状态： | Not Qualified |
| 座面最大高度： | 1.75 mm | 最大供电电压 (Vsup)： | 5.5 V |
| 最小供电电压 (Vsup)： | 4.5 V | 标称供电电压 (Vsup)： | 5 V |
| 表面贴装： | YES | 技术： | TTL |
| 温度等级： | COMMERCIAL | 端子形式： | GULL WING |
| 端子节距： | 1.27 mm | 端子位置： | DUAL |
| 宽度： | 3.9 mm | Base Number Matches： | 1 |
SN7ALS1035D 数据手册
通过下载SN7ALS1035D数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载SN54ALS1035, SN74ALS1035
HEX NONINVERTING BUFFERS
WITH OPEN-COLLECTOR OUTPUTS
SDAS243B – APRIL 1982 – REVISED AUGUST 2001
SN54ALS1035 . . . J OR W PACKAGE
SN74ALS1035 . . . D OR N PACKAGE
(TOP VIEW)
Noninverting Buffers With
Open-Collector Outputs
description
1A
1Y
2A
2Y
3A
V
CC
1
2
3
4
5
6
7
14
13
12
11
10
9
6A
6Y
5A
5Y
4A
4Y
These devices contain six independent
noninverting buffers. They perform the Boolean
function Y = A. The open-collector outputs require
pullup resistors to perform correctly. They can be
connected to other open-collector outputs to
implement active-low wired-OR or active-high
wired-AND functions. Open-collector devices are
3Y
GND
8
often used to generate higher V
levels.
OH
SN54ALS1035 . . . FK PACKAGE
(TOP VIEW)
3
2
1
20 19
18
2A
NC
2Y
4
5
6
7
8
6Y
NC
5A
NC
5Y
17
16
15
14
NC
3A
9 10 11 12 13
NC – No internal connection
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
T
A
PACKAGE
Tube
SN7ALS1035D
SOIC – D
ALS1035
0°C to 70°C
Tape and reel SN7ALS1035DR
PDIP – N
CDIP – J
CFP – W
LCCC - FK
Tube
Tube
Tube
Tube
SN74ALS1035N
SNJ54ALS1035J
SNJ54ALS1035W
SNJ54ALS1035FK
SN74ALS1035N
SNJ54ALS1035J
SNJ54ALS1035W
–55°C to 125°C
SNJ54ALS1035FK
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
FUNCTION TABLE
(each buffer)
INPUT
A
OUTPUT
Y
H
L
H
L
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2001, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ALS1035, SN74ALS1035
HEX NONINVERTING BUFFERS
WITH OPEN-COLLECTOR OUTPUTS
SDAS243B – APRIL 1982 – REVISED AUGUST 2001
logic diagram (positive logic)
1
2
4
1A
1Y
2Y
3Y
4Y
5Y
6Y
3
2A
5
6
3A
9
8
4A
11
10
12
5A
13
6A
Pin numbers shown are for the D, J, N, and W packages.
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
CC
Input voltage, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
I
Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Package thermal impedance, θ (see Note 1): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
JA
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
1. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
SN54ALS1035
MIN NOM MAX
SN74ALS1035
MIN NOM MAX
UNIT
V
V
V
V
Supply voltage
4.5
2
5
5.5
4.5
2
5
5.5
V
V
CC
High-level input voltage
Low-level input voltage
High-level output voltage
Low-level output current
Operating free-air temperature
IH
0.7
5.5
12
0.8
5.5
24
V
IL
V
OH
I
mA
°C
OL
T
A
–55
125
0
70
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ALS1035, SN74ALS1035
HEX NONINVERTING BUFFERS
WITH OPEN-COLLECTOR OUTPUTS
SDAS243B – APRIL 1982 – REVISED AUGUST 2001
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54ALS1035
SN74ALS1035
PARAMETER
TEST CONDITIONS
UNIT
V
†
†
MIN TYP
MAX
–1.5
0.4
MIN TYP
MAX
–1.5
0.4
0.5
0.1
0.1
20
V
V
V
V
= 4.5 V,
= 4.5 V
I = –18 mA
I
IK
CC
I
= 12 mA
= 24 mA
0.25
0.25
0.35
OL
OL
V
OL
CC
I
I
I
I
I
I
I
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 4.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
V
= 5.5 V
0.1
0.1
20
mA
mA
µA
OH
OH
V = 7 V
I
I
V = 2.7 V
I
IH
V = 0.4 V
I
–0.1
6
–0.1
6
mA
mA
mA
IL
V = 4.5 V
I
3
8
3
8
CCH
CCL
V = 0
I
14
14
†
All typical values are at V
= 5 V, T = 25°C.
A
CC
switching characteristics (see Figure 1)
V
C
R
= 4.5 V to 5.5 V,
= 50 pF,
CC
L
L
= 680 Ω,
= MIN to MAX
FROM
TO
(OUTPUT)
‡
PARAMETER
(INPUT)
UNIT
T
A
SN54ALS1035 SN74ALS1035
MIN
5
MAX
35
MIN
5
MAX
30
t
t
PLH
A
Y
ns
2
14
2
12
PHL
‡
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ALS1035, SN74ALS1035
HEX NONINVERTING BUFFERS
WITH OPEN-COLLECTOR OUTPUTS
SDAS243B – APRIL 1982 – REVISED AUGUST 2001
PARAMETER MEASUREMENT INFORMATION
SERIES 54ALS/74ALS AND 54AS/74AS DEVICES
7 V
R
= R1 = R2
V
CC
L
S1
R1
R
L
Test
Point
From Output
Under Test
From Output
Under Test
Test
Point
Test
Point
From Output
Under Test
C
C
L
R
L
R2
L
C
L
(see Note A)
(see Note A)
(see Note A)
LOAD CIRCUIT FOR
BI-STATE
TOTEM-POLE OUTPUTS
LOAD CIRCUIT
FOR OPEN-COLLECTOR OUTPUTS
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
3.5 V
3.5 V
Timing
Input
High-Level
1.3 V
1.3 V
1.3 V
Pulse
0.3 V
0.3 V
t
t
w
h
t
su
3.5 V
3.5 V
0.3 V
Data
Input
Low-Level
1.3 V
1.3 V
1.3 V
1.3 V
Pulse
0.3 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATIONS
3.5 V
0.3 V
Output
Control
(low-level
enabling)
1.3 V
1.3 V
3.5 V
t
PZL
Input
1.3 V
1.3 V
t
PLZ
0.3 V
PHL
3.5 V
t
Waveform 1
S1 Closed
(see Note B)
t
PLH
1.3 V
V
OH
In-Phase
Output
1.3 V
1.3 V
1.3 V
V
OL
0.3 V
V
OL
t
PHZ
t
PLH
t
PZH
t
PHL
V
OH
V
Waveform 2
S1 Open
(see Note B)
OH
OL
Out-of-Phase
Output
(see Note C)
1.3 V
1.3 V
0.3 V
V
0 V
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A.
C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. When measuring propagation delay items of 3-state outputs, switch S1 is open.
D. All input pulses have the following characteristics: PRR ≤ 1 MHz, t = t = 2 ns, duty cycle = 50%.
r
f
E. The outputs are measured one at a time with one transition per measurement.
Figure 1. Load Circuits and Voltage Waveforms
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
microcontroller.ti.com
www.ti.com/lpw
Low Power
Wireless
Telephony
www.ti.com/telephony
Video & Imaging
Wireless
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-88742012A
5962-8874201CA
5962-8874201DA
SN54ALS1035J
SN74ALS1035D
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
FK
J
20
14
14
14
14
1
1
1
1
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
W
J
CDIP
SOIC
A42 SNPB
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ALS1035DE4
SN74ALS1035DG4
SN74ALS1035DR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
SO
D
D
14
14
14
14
14
14
14
14
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ALS1035DRE4
SN74ALS1035DRG4
SN74ALS1035N
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
N
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN74ALS1035NE4
SN74ALS1035NSR
SN74ALS1035NSRE4
SN74ALS1035NSRG4
N
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
NS
NS
NS
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ54ALS1035FK
SNJ54ALS1035J
SNJ54ALS1035W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
14
14
1
1
1
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42
N / A for Pkg Type
N / A for Pkg Type
W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) (mm) Quadrant
(mm)
330
(mm)
16
SN74ALS1035DR
SN74ALS1035NSR
D
14
14
SITE 41
SITE 41
6.5
8.2
9.0
2.1
2.5
8
16
16
Q1
Q1
NS
330
16
10.5
12
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
Device
Package
Pins
Site
Length (mm) Width (mm) Height (mm)
SN74ALS1035DR
SN74ALS1035NSR
D
14
14
SITE 41
SITE 41
346.0
346.0
346.0
346.0
33.0
33.0
NS
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN7ALS1035D 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| SN7ALS1035DR | TI | HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS | 获取价格 |
|
| SN8000 | MURATA | SN8000/SN8000UFL Wi-Fi Module | 获取价格 |
|
| SN8120 | APITECH | 0 MHz - 400 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER, SM-3, 4 PIN | 获取价格 |
|
| SN8200 | MURATA | Wi-Fi 802.11 b/g/n Network Controller Module | 获取价格 |
|
| SN8200-EVK | MURATA | WiâFi Module Evaluation Kit | 获取价格 |
|
| SN8200EVK+ | MURATA | WiâFi Module Evaluation Kit | 获取价格 |
|
| SN8200UFL | MURATA | Wi-Fi 802.11 b/g/n Network Controller Module | 获取价格 |
|
| SN8205 | MURATA | Wi-Fi 802.11 b/g/n Network Controller Module | 获取价格 |
|
| SN8205UFL | MURATA | Telecom Circuit, | 获取价格 |
|
| SN820X | MURATA | Wi-Fi 802.11 b/g/n Network Controller Module | 获取价格 |
|
SN7ALS1035D 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
