TPS25772-Q1 [TI]
TPS25772-Q1 Automotive Dual USB Type-C Power Delivery Controller with Buck-Boost Regulator;型号: | TPS25772-Q1 |
厂家: | TEXAS INSTRUMENTS |
描述: | TPS25772-Q1 Automotive Dual USB Type-C Power Delivery Controller with Buck-Boost Regulator |
文件: | 总7页 (文件大小:454K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TPS25772-Q1
SLVSG14 – JANUARY 2021
TPS25772-Q1 Automotive Dual USB Type-C Power Delivery Controller with Buck-
Boost Regulator
1 Features
3 Description
•
AEC-Q100 qualified with the following results:
– Device temperature grade 1: –40°C to +125°C
ambient operating temperature range
The TPS257xx-Q1 is dual USB Type-C® PD and
BC1.2 charging port controller for use in automotive
dual USB port applications that include charge only
and charging with USB 2.0 or 3.0 data. Functionality
includes: an ARM Cortex M0™; USB port controller
with Type-C cable plug and orientation detection; USB
Battery Charging Specification Version 1.2 (BC1.2)
detection; USB Endpoint PHY; device power
management and supervisory circuitry; connector pin
protection over-voltage and short-circuit protection;
and integrated buck-boost converter.
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C5
– Enhanced connector pin ESD protection
USB Power Delivery (PD) controller with
Programmable Power Supply (PPS) support
– Wide VIN: 5.5 V to 18 V (40-V maximum)
– Integrated buck-boost sources up to 60-W USB
PD output power
•
Full 60-W output power is achievable over 6.8 V ≤ VIN
≤ 18 V at up to 70°C ambient temperature (TA). An
intelligent System Policy Manager maximizes
delivered USB power while protecting the system from
automotive battery transient and over-temperature
conditions.
– VBUS output: 3 - 21 V with ± 20-mV step size
– IBUS output: ± 50-mA current limit step size
•
•
Up to 5 A, 3 V ≤ VBUS ≤ 11 V
Up to 3 A, 11 V ≤ VBUS ≤ 21 V
– VBUS short circuit to VBAT and GND protection
– Switching frequency: 300, 400, 450 kHz
– Sync In / Out with dithering
Device configuration settings are selected through an
intuitive graphical user interface (GUI).
•
•
USB port configurations options
Device Information
– 2 USB-PD Ports (TPS25772-Q1)
– 1 USB-PD and 1 USB-C Ports (TPS25766-Q1)
– 1 USB-PD and 1 Type-A Ports (TPS25764-Q1)
Compliant to USB
PART NUMBER
TPS25764-Q1(2)
TPS25766-Q1(2)
TPS25772-Q1
PACKAGE(1)
BODY SIZE
RQL (QFN-29)
6 mm x 5 mm
– Type-C power delivery rev 3.0
•
•
CC logic, VCONN source and discharge
USB cable polarity detection
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) PRODUCT PREVIEW status.
– Battery charging specification rev 1.2
DCP: Dedicated Charging Port
•
VBAT
PGND
IN
– 2.7-V divider-3 mode
– 1.2-V divider mode
Short to VBUS and VBAT protection
– Px_ DP and Px_DM
ON
PA_CC1
PA_CC2
PA_DP
OFF
EN
LDO5V
•
PA_DM
CSN/BUS
CSP
LDO3V3
LDO1V5
3-21V
– Px_CC1 and Px_CC2
OUT
AGND
TVSP
3V3
2 Applications
PB_BUS
NTC
/INT
•
•
•
•
Automotive USB Power Delivery Chargers
Automotive USB Hubs/Media Ports
Automotive USB Rear Seat Entertainment
Automotive USB Head Unit
E2PROM
(32kB)
SCL1
SDA1
PB_CC1
PB_CC2
PB_DP
PB_DM
VBAT
3-21V
TPS55288-Q1
(I2C buck-boost)
Port B VBUS
TPS25772-Q1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change
without notice.
TPS25772-Q1
SLVSG14 – JANUARY 2021
www.ti.com
4 Device Comparison Table
PART NUMBER
'25761-Q1 (1)
Port A
Port B
Port A Output Power
Alternate Mode
30 W
60 W
60 W
60 W
60 W
60 W
No
No
'25762-Q1 (1)
'25763-Q1 (1)
'25764-Q1 (1)
'25766-Q1(1)
'25772-Q1
n/a
Yes (DisplayPortTM
)
USB-PD
Type-A
USB-C
No
No
No
USB-PD
(1) PRODUCT PREVIEW status.
Copyright © 2021 Texas Instruments Incorporated
2
Submit Document Feedback
Product Folder Links: TPS25772-Q1
TPS25772-Q1
SLVSG14 – JANUARY 2021
www.ti.com
5 Device and Documentation Support
5.1 Documentation Support
5.1.1 Related Documentation
Please visit TI homepage for latest technical document including application notes, user guides, and reference
designs.
IC Package Thermal Metrics application report, Semiconductor and IC Package Thermal Metrics.
5.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on
Subscribe to updates to register and receive a weekly digest of any product information that has changed. For
change details, review the revision history included in any revised document.
5.3 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
5.4 Trademarks
TI E2E™ is a trademark of Texas Instruments.
All trademarks are the property of their respective owners.
5.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
5.6 Glossary
TI Glossary
This glossary lists and explains terms, acronyms, and definitions.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
3
Product Folder Links: TPS25772-Q1
TPS25772-Q1
SLVSG14 – JANUARY 2021
www.ti.com
6 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Copyright © 2021 Texas Instruments Incorporated
4
Submit Document Feedback
Product Folder Links: TPS25772-Q1
PACKAGE OPTION ADDENDUM
www.ti.com
5-Feb-2021
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
PTP25772A0QWRQLTQ1
TPS25772QWRQLRQ1
ACTIVE
VQFN-HR
RQL
29
29
250
RoHS (In work)
& Non-Green
Call TI
Call TI
Call TI
-40 to 125
-40 to 125
PREVIEW VQFN-HR
RQL
3000 RoHS (In work)
& Non-Green
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
5-Feb-2021
Addendum-Page 2
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party
intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages,
costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (https:www.ti.com/legal/termsofsale.html) or other applicable terms available either
on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s
applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2021, Texas Instruments Incorporated
相关型号:
TPS25772QWRQLRQ1
TPS25772-Q1 Automotive Dual USB Type-C Power Delivery Controller with Buck-Boost Regulator
TI
©2020 ICPDF网 联系我们和版权申明