TS2PCIE2212ZAHR [TI]
PCI Express SIGNAL SWITCH; PCI Express的信号开关型号: | TS2PCIE2212ZAHR |
厂家: | TEXAS INSTRUMENTS |
描述: | PCI Express SIGNAL SWITCH |
文件: | 总12页 (文件大小:202K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
FEATURES
•
Offers Bandwidth Allocation of PCI Express™
Signal Using Two-Lane 1:2
Multiplexer/Demultiplexer
•
•
•
Excellent Differential Skew (5 ps Max)
Minimal Propagation Delay
ESD Performance Tested Per JESD 22
•
•
•
•
•
•
Vcc Operating Range From 1.7 V to 1.9 V
Supports Data Rates of 2.5 Gbps
– 2000-V Human-Body Model
(A114-B, Class II)
Port-Port Crosstalk (–39 dB at 1.25 GHz)
OFF Port Isolation (–38 dB at 1.25 GHz)
Low ON-State Resistance (10 Ω Typ)
Low Input/Output Capacitance (3.5 pF Typ)
– 1000-V Charged-Device Model (C101)
DESCRIPTION/ORDERING INFORMATION
The TS2PCIE2212 can be used to muxltiplex/demultiplex two PCI Express™ lanes, each representing
differential pairs of receive (RX) and transmit (TX) signals. The switch operates at the PCI Express bandwidth
standard of 2.5-Gbps signal-processing speed. The device is composed of two banks, with each bank
accommodating two sources (source A and source B) and two destinations (destination A and destination B).
When a logic-level low is applied to the control (CTRL) pin, source A is connected to destination A and source B
is connected to destination B. When a logic-level high is applied to CTRL, source A is connected to destination
B, while source B and destination A are open.
ORDERING INFORMATION
TA
PACKAGE
Tape and reel
ORDERABLE PART NUMBER
TOP-SIDE MARKING
0°C to 85°C
BGA – ZAH
TS2PCIE2212ZAHR
ZAH PACKAGE
(BOTTOM VIEW)
5 mm
J
H
G
F
5 mm
E
D
C
B
A
1
2 7 8 9
3 4 5 6
TERMINAL ASSIGNMENTS
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
CTRL0
TxSB:0P
GND
TxSA:0P
TxSA:0N
GND
VDD
TxDA:0P
TxDA:0N
TxDB:0P
GND
NC
RxSA:0P
TxSB:0N
TxDB:0N
RxDA:0P
RxSA:0N
RxSB:0N
VDD
RxDA:0N
RxDB:0N
VDD
RxSB:0P
GND
RxDB:0P
GND
TxSA:1P
TxSA:1N
TxSB:1N
GND
TxDA:1N
TxDB:1N
GND
TxDA:1P
G
H
J
TxSB:1P
NC
RxSA:1N
RxSB:1N
RXSB:1P
VDD
GND
RxDB:1N
RXDB:1P
RxDA:1N
TxDB:1P
CTRL1
RxSA:1P
RxDA:1P
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PCI Express is a trademark of PCI-SIG.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
PIN DESCRIPTION
NAME
FUNCTION
TxSA:nP, TxSA:nN
RxSA:nP, RxSA:nN
TxSB:nP, TxSB:nN
RxSB:nP, RxSB:nN
TxDA:nP, TxDA:nN
RxDA:nP, RxDA:nN
TxDB:nP, TxDB:nN
RxDB:nP, RxDB:nN
CTRL0
Source A transmit pair
Source A receive pair
Source B transmit pair
Source B receive pair
Destination A transmit pair
Destination A receive pair
Destination B transmit pair
Destination B receive pair
Control signal for bank 0
Control signal for bank 1
Positive supply voltage
Ground (0 V)
CTRL1
VDD
GND
NC
No internal connection
LOGIC DIAGRAM
CTRL0
2
2
TxSA:0
TxDA:0
2
2
2
2
TxSB:0
RxSA:0
TxDB:0
RxDA:0
2
2
2
2
RxDB:0
TxDA:1
RxSB:0
TxSA:1
2
2
2
2
TxSB:1
RxSA:1
TxDB:1
RxDA:1
2
2
RxSB:1
CTRL1
RxDB:1
2
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
FUNCTION TABLE
CTRLn
FUNCTION
L
SA:n = DA:n, SB:n = DB:n
H
SA:n = DB:n, DA:n = open, SBin = open
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
MAX
2.5
UNIT
V
VDD
VIN
VI/O
IIK
Supply voltage range
Control input voltage range(2)(3)
Switch I/O voltage range(2)(3)(4)
Control input clamp current
I/O port clamp current
2.5
V
2.5
V
VIN < 0 and VI/O < 0
VIN < 0 and VI/O < 0
50
mA
mA
mA
mA
°C/W
°C
II/OK
II/O
50
ON-state switch current(5)
±100
±100
TBD
150
Continuous current through VDD or GND
Package thermal impedance(6)
Storage temperature range
θJA
Tstg
–65
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) VI and VO are used to denote specific conditions for VI/O
(5) II and IO are used to denote specific conditions for II/O
.
.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
MIN
1.7
TYP
MAX UNIT
VDD
VIH
VIL
VIO
TA
Supply voltage
1.8
1.9
V
V
High-level control input voltage
Low-level control input voltage
Data input/output voltage
Operating free-air temperature
CTRL
CTRL
0.65 VDD
0.35 VDD
VDD
V
0
0
V
85
°C
3
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
TA = 0°C to 85°C
PARAMETER
TEST CONDITIONS
UNIT
MIN TYP
MAX
–1.8
VIK
IIN
Control inputs
Control inputs
VDD = 1.7 V,
VDD = 1.9 V,
IIN = –18 mA
V
VIN = VDD or GND
±1
µA
VO = 0 to 1.9 V,
VI = 0,
IOZ
VDD = 1.9 V,
Switch OFF
±5
µA
µA
VDD = 1.9 V,
VIN = VDD or GND,
ICC
Cin
II/O = 0,
Switch ON or OFF
160
300
Control inputs
VDD = 1.9 V,
VI/O = 0 V,
VIN = VDD or GND
Switch OFF
Switch ON
0.5
1.4
3.5
10
1.0
1.5
4
pF
pF
pF
CIO(OFF) SB or DA port
CIO(ON)
VI/O = 0 V,
VDD = 1.7 V,
VDD = 1.7 V,
VDD = 1.7 V,
VI = 0 V,
IO = 10 mA
14
17
5
ron
Ω
Ω
VI = 1.5 V,
IO = –10 mA
12
∆ron(flat)
IO = 10 mA,
VI = 1.5 V ± 0.4 V
2.5
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
TA = 0°C to 85°C
PARAMETER
DESCRIPTION
TEST CONDITIONS
UNIT
MIN
TYP
2.5
MAX
DR
tpd
tsk
Data rate per TX or RX pair
Propagation delay, Sx to Dx
Intra-pair skew
Gbps
ps
See Figure 7
250
f =1.25 GHz, See Figure 7
See Figure 6
5
5
ps
ten (tPZL, tPZH
)
Switch turn-on delay, CTRL to DA
Switch turn-off delay, CTRL to DA
ns
tdis (tPLZ, tPHZ
)
See Figure 6
2.5
ns
f =1.25 GHz, RLOAD = 50 Ω,
See Figure 1
ILOSS
Differential insertion loss
Differential return loss
–2.5
–9.5
–2
–3.2
dB
dB
dB
dB
dB
f =1.25 GHz, RLOAD = 50 Ω,
See Figure 2
RLOSS
ILOSS(CM)
OIFF
–7.2
f =1.25 GHz, RLOAD = 50 Ω,
See Figure 3
Common-mode insertion loss
Differential OFF isolation
Differential crosstalk
f =1.25 GHz, RLOAD = 50 Ω,
See Figure 4
–33
–33
–38
–39
f =1.25 GHz, RLOAD = 50 Ω,
See Figure 5
XTALK
4
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
OPERATING CHARACTERISTICS
0
−1
−2
−3
−4
−5
0
−5
−10
−15
−20
−25
−6
0.01
0.10
1.00
10.00
0.01
0.10
1.00
10.00
Frequency (GHz)
Frequency (GHz)
Figure 1. Differential Insertion Loss vs Frequency
Figure 2. Differential Return Loss vs Frequency
0
−2
0
−20
−40
−60
−80
−4
−6
−8
−10
−12
0.01
0.10
1.00
10.00
0.01
0.10
1.00
10.00
Frequency (GHz)
Frequency (GHz)
Figure 3. Common-Mode Insertion Loss vs Frequency
Figure 4. Differential OFF Isolation vs Frequency
0
−20
−40
−60
−80
0.01
0.10
1.00
10.00
Frequency (GHz)
Figure 5. Differential Crosstalk vs Frequency
5
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
PARAMETER MEASUREMENT INFORMATION
(Enable and Disable Times)
V
DD
Input Generator
V
IN
CTRL
50 Ω
50 Ω
V
G1
TEST CIRCUIT
DUT
2 × V
DD
Input Generator
50 Ω
S1
Open
R
L
V
I
V
O
SA
GND
V
G2
C
L
R
L
(see Note A)
S1
2 × V
V
I
C
V
∆
R
V
TEST
L
L
CC
t
/t
1.8 V ± 0.1 V
1.8 V ± 0.1 V
100 Ω
100 Ω
GND
No Load
No Load
0.3 V
0.3 V
PLZ PZL
DD
t
/t
GND
V
DD
PHZ PZH
Output Control
V
DD
(V
IN
)
V /2
DD
V /2
DD
Output
0 V
Waveform 1
t
t
PLZ
PZL
S1 at 2 y V
DD
V
V
OH
(see Note B)
V
/2
DD
V
V
+ 0.3 V
OL
OL
t
t
PZH
PHZ
Output
Waveform 2
S1 at GND
V
V
OH
− 0.3 V
OH
V
DD
/2
OL
(see Note B)
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.
O
r
f
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
t
t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PHZ
PZH
are the same as t
en
Figure 6. Test Circuit and Voltage Waveforms
6
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
PARAMETER MEASUREMENT INFORMATION
V
DD
TS2PCIE2212
A1
V
(1)
DD
T1
CTRL0
GND
Sx:nP
Dx:nP
Input
Generator
V
V
100 Ω
I
O
Sx:nN Dx:nN
(1)
TEST PATH
T1
SA:n = DA:n, SB:n = DB:n
GND
SA:n = DB:n, DA:n = open
V
DD
(1) T1 is an external terminal.
V
+ 400 mV
− 400 mV
COM
Input
Waveform
V
COM
V
COM
V
COM
OH
t
t
PLH
PHL
V
Output
Waveform
V
CRS
V
CRS
V
OL
V
V
= 1.5 V
COM
is the cross point of the differential signal.
– t
CRS
t
= |t
|
PHLn
sk
PLHn
Figure 7. Test Circuit for Propagation Delay and Intra-Pair Skew
7
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
PARAMETER MEASUREMENT INFORMATION (continued)
V
DD
TS2PCIE2212
A1
V
DD
CTRL0
GND
SA:nP
SA:nN
DA:nP
DA:nN
50 Ω
50 Ω
Network
Analyzer
SB:nP
SB:nN
DB:nP
DB:nN
50 Ω
50 Ω
VNA
MEASUREMENT
TEST
Differential insertion loss
Differential return loss
S
21
S
S
11
Common-mode insertion loss
21
Figure 8. Differential Insertion Loss, Differential Return Loss,
and Common-Mode Insertion Loss Test Circuit
8
Submit Documentation Feedback
TS2PCIE2212
PCI Express™ SIGNAL SWITCH
www.ti.com
SCDS209–JUNE 2006
PARAMETER MEASUREMENT INFORMATION (continued)
V
DD
TS2PCIE2212
A1
V
DD
(1)
T1
CTRL0
GND
TxSA:0P
TxSA:0N
TxDA:0P
TxDA:0N
A6
B6
A4
B4
50 Ω
50 Ω
Network
Analyzer
TxSB:0P
TxSB:0N
TxDB:0P
TxDB:0N
A2
B3
A8
B7
50 Ω
50 Ω
(1)
TEST
T1
Differential crosstalk
GND
Differential OFF isolation
V
DD
(1) T1 is an external terminal.
Figure 9. Differential Crosstalk and OFF Isolation Test Circuit
9
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
18-Jul-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
TS2PCIE2212ZAHR
ACTIVE
BGA
ZAH
48
3000
Pb-Free
(RoHS)
SNAGCU
Level-3-260C-168 HR
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Low Power Wireless www.ti.com/lpw
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明