TSB12LV21BMPGFEP [TI]
(PCILynx-2) IEEE 1394 LINK LAYER CONTROLLER; （ PCILynx - 2 ）， IEEE 1394链路层控制器
| 型号： | TSB12LV21BMPGFEP |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | (PCILynx-2) IEEE 1394 LINK LAYER CONTROLLER |
| 文件： | 总6页 (文件大小：82K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TSB12LV21B-EP
www.ti.com...................................................................................................................................................................................................... SLLA274–APRIL 2008
(PCILynx-2) IEEE 1394 LINK LAYER CONTROLLER
1
FEATURES
•
Controlled Baseline
•
3.3-V Core Logic While Maintaining
5-V Tolerant Inputs
–
–
–
One Assembly Site
One Test Site
•
•
•
•
•
•
•
Performs the Function of 1394 Cycle Master
Provides 4 KBytes of Configurable FIFO RAM
Provides Five Scatter-Gather DMA Channels
Provides Software Control of Interrupt Events
Provides Four General-Purpose Input/Outputs
Supports Plug-and-Play (PnP) Specification
One Fabrication Site
•
•
Extended Temperature Performance of
–55°C to 125°C
Enhanced Diminishing Manufacturing Sources
(DMS) Support
•
•
•
•
•
•
Enhanced Product-Change Notification
Generates 32-Bit CRC for Transmission of
1394 Packets
(1)
Qualification Pedigree
IEEE Standard for 1394-1995 Compliant
IEEE Standard for 1212-1991 Compliant
Supports IEEE 1394-1995 Link Layer Control
•
•
•
•
Performs 32-Bit CRC Checking on Reception
of 1394 Packets
Provides PCI Bus Master Function for
Supporting DMA Operations
PCI Local Bus Specification Rev. 2.1
Compliant
Provides PCI Slave Function for Read/Write
Access of Internal Registers
•
Supports IEEE 1394 Transfer Rates of 100,
200, and 400 Mbit per Second
Supports Distributed DMA Transfers Between
1394 and Local Bus RAM, ROM, AUX, or
Zoomed Video
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
•
•
Advanced Submicron, Low-Power CMOS
Technology
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
Packaged in a 176-Pin PQFP (PGF)
DESCRIPTION
The TSB12LV21B (PCILynx-2) provides a high-performance IEEE 1394-1995 interface with the capability to
transfer data between the 1394 PHY-link interface, the PCI bus interface, and external devices connected to the
local bus interface. The 1394 PHY-link interface provides the connection to the 1394 physical layer device; it is
supported by the onboard link layer controller (LLC). The LLC provides the control for transmitting and receiving
1394 packet data between the FIFO and PHY-link interface at rates of 100 Mbit/s, 200 Mbit/s, and 400 Mbit/s.
The link layer also provides the capability to receive status from the physical layer device and to access the
physical layer control and status registers by the application software. The PCILynx-2 complies with
•
•
•
•
PCI Local Bus Specification, Revision 2.1
IEEE Standard for a 1394-1995 High Performance Serial Bus
IEEE Standard 1212-1991
IEEE Standard Control and Status Register (CSR) Architecture for Microcomputer Buses
An internal 4 Kbyte memory can be configured as multiple variable-size FIFOs, eliminating the need for external
FIFOs. Separate FIFOs are user configurable to support 1394 receive, asynchronous transmit, and
isosynchronous transmit transfer operations.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2008, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
On products compliant to MIL-PRF-38535, all parameters are
Instruments standard warranty. Production processing does not
tested unless otherwise noted. On all other products, production
necessarily include testing of all parameters.
processing does not necessarily include testing of all parameters.
TSB12LV21B-EP
SLLA274–APRIL 2008...................................................................................................................................................................................................... www.ti.com
The PCI interface supports 32-bit burst transfers up to 33 MHz and is capable of operating both as a master and
as a target device. Configuration registers can be loaded from an external serial EEPROM, allowing board and
system designers to assign their own unique identification codes. An autoboot mode allows data-moving systems
(such as docking stations) to be designed to operate on the PCI bus without the need for a host CPU.
The DMA controller uses packet control list (PCL) data structures to control the transfer of data and allow the
DMA to operate without host CPU intervention. These PCLs can reside in PCI memory or in memory that is
connected to a local bus port. The PCLs implement an instruction set that allows linking, conditional branching,
1394 data transfer control, auxiliary support commands, and status reporting. Five DMA channels accommodate
programmable data types. PCLs can be chained together to form a channel control program that can be
developed to support each DMA channel. Data can be stored in either big endian or little endian format,
eliminating the need for the host CPU to perform byte swapping. Data can be transferred either to 4-byte aligned
locations, to provide the highest performance, or to nonaligned locations, to provide the best memory use.
The RAM, ROM, AUX, ZV, and general-purpose I/O (GPIO) ports collectively make up the local bus interface.
These ports mapped into the PCI address, can be accessed either through the PCI bus or through internal DMA
transactions. Internal transactions do not appear on the external PCI bus, thereby conserving PCI bandwidth.
DMA packet control lists or other data may be stored in external RAM or ROM attached to the local bus
interface. This further reduces PCI bus use and generally improves performance. The ZV local bus port is
designed to transfer data from 1394 video devices to an external device connected to the PCILynx-2 ZV port.
This interface provides a method for receiving 1394 digital camera packets directly from a ZV-compliant device
attached to the local bus interface.
Built-in test registers, a dedicated test output terminal, and four GPIO terminals allow observation of internal
states and provide a convenient software debug capability. Programmable interrupts are available to inform
driver software of important events, such as 1394 bus resets and DMA-to-PCL transfer completion.
The 3.3-V internal operation provides reduced power consumption, while maintaining compatibility with 5-V
signaling environments. The PCI interface is compatible with both 3-V and 5-V PCI systems.
The TSB12LV21B is characterized for operation over the military temperature range of –55°C to 125°C.
NOTE:
For a complete data sheet (literature number SLLS879) or more information, contact
support@ti.com.
ORDERING INFORMATION(1)
TA
PACKAGE(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
–55°C to 125°C
176-Pin PQFP
PGF
TSB12LV21BMPGFEP
12LV21BMPGFEP
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
2
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TSB12LV21B-EP
PACKAGE OPTION ADDENDUM
www.ti.com
18-Jun-2011
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
TSB12LV21BMPGFEP
V62/08625-01XE
NRND
NRND
LQFP
LQFP
PGF
PGF
176
176
40
40
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-3-260C-168 HR
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-3-260C-168 HR
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TSB12LV21B-EP :
Catalog: TSB12LV21B
•
NOTE: Qualified Version Definitions:
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
18-Jun-2011
Catalog - TI's standard catalog product
•
Addendum-Page 2
ꢀ ꢁꢂꢃꢄ ꢅꢆꢂ ꢄꢇꢈ ꢉꢄꢊꢄ
ꢋ
ꢋ
ꢋ
OCTOBER 1994
PGF (S-PQFP-G176)
PLASTIC QUAD FLATPACK
132
89
133
88
0,27
0,17
M
0,08
0,50
0,13 NOM
176
45
1
44
Gage Plane
21,50 SQ
24,20
SQ
23,80
26,20
25,80
0,25
0,05 MIN
0°−ā7°
SQ
0,75
0,45
1,45
1,35
Seating Plane
0,08
1,60 MAX
4040134/B 03/95
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Falls within JEDEC MO-136
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
RFID
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明