TSM102IDRG4 [TI]
QUAD OP-AMP, 6500uV OFFSET-MAX, 2.1MHz BAND WIDTH, PDSO16, GREEN, PLASTIC, MS-012AC, SOIC-16;型号: | TSM102IDRG4 |
厂家: | TEXAS INSTRUMENTS |
描述: | QUAD OP-AMP, 6500uV OFFSET-MAX, 2.1MHz BAND WIDTH, PDSO16, GREEN, PLASTIC, MS-012AC, SOIC-16 放大器 光电二极管 |
文件: | 总17页 (文件大小:1165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
FEATURES
APPLICATIONS
•
•
•
•
Switch-Mode Power Supplies
Battery Chargers
Voltage and Current Sensing
Power-Good, Overvoltage, Undervoltage,
Overcurrent Detection
•
OPERATIONAL AMPLIFIERS
– Low Supply Current…200 µA/A
– Medium Speed…2.1 MHz
– Low-Level Output Voltage Close to
VCC–…0.1 V Typ (RL = 10 kΩ)
•
•
Window Comparators
Alarms, Detectors, and Sensors
– Input Common-Mode Voltage Range
Includes Ground
•
•
COMPARATORS
D (SOIC) OR PW (TSSOP) PACKAGE
(TOP VIEW)
– Low Supply Current…200 µA/A
(VCC = 5 V)
1OUT
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
4OUT
4IN−
4IN+
COMP
COMP
– Input Common-Mode Voltage Range
Includes Ground
1IN−
–
–
+
+
1IN+
– Low Output Saturation Voltage…
Typically 250 mV (Isink = 4 mA)
V
CC+
V
CC–
2IN+
2IN−
3IN+
VOLTAGE REFERENCE
+
–
–
+
– Adjustable Output Voltage…VREF to 36 V
– Sink Current Capability…1 mA to 100 mA
3IN−
AMP
AMP
2OUT
3OUT
– 0.4% (A Grade) and 1% (Standard Grade)
Precision
V
REF
CATHODE
– Latch-Up Immunity
DESCRIPTION/ORDERING INFORMATION
The TSM102 and TMS102A combine the building blocks of a dual operational amplifier, a dual comparator, and
a precision voltage reference, all of which often are used to implement a wide variety of power-management
functions, including overcurrent detection, undervoltage/overvoltage detection, power-good detection, window
comparators, error amplifiers, etc. Additional applications include alarm and detector/sensor applications.
The TSM102A offers a tight VREF tolerance of 0.4% at 25°C. The TSM102 and TSM102A are characterized for
operation from –40°C to 85°C.
ORDERING INFORMATION
MAX VREF
TOLERANCE (25°C)
TA
PACKAGE(1)
ORDERABLE PART NUMBER TOP-SIDE MARKING
Tube of 75
TSM102AID
TSM102AI
SOIC – D
Reel of 2500
Tube of 90
TSM102AIDR
A grade:
0.4% precision
TSM102AIPW
SN102AI
TSSOP – PW
SOIC – D
Reel of 2000
Tube of 75
TSM102AIPWR
–40°C to 85°C
TSM102ID
TSM102I
Reel of 2500
Tube of 90
TSM102IDR
Standard grade:
1% precision
TSM102IPW
SN102I
TSSOP – PW
Reel of 2000
TSM102IPWR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
Absolute Maximum Ratings(1)
over free-air temperature range (unless otherwise noted)
MIN
MAX UNIT
VCC
VID
VI
Supply voltage
36
36
V
V
Input differential voltage
Input voltage range
–0.3
36
V
IKA
Voltage reference cathode current
100
73
mA
D package
θJA
Package thermal impedance(2)(3)
°C/W
PW package
108
150
150
TJ
Maximum junction temperature
Storage temperature range
°C
°C
Tstg
–65
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can affect reliability.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
MIN
MAX UNIT
VCC+ – VCC–
Supply voltage
3
30
V
V
VID
VKA
IK
Comparator differential input voltage
Cathode-to-anode voltage
Reference cathode current
Operating free-air temperature
VCC+ – VCC–
VREF
1
36
100
85
V
mA
°C
TA
–40
Total Device Electrical Characteristics
PARAMETER
TEST CONDITIONS
TA
MIN
TYP
MAX UNIT
25°C
0.8
1.5
mA
2
Total supply current,
ICC
VCC+ = 5 V, VCC– = 0 V, No load
excluding reference cathode current
Full range
2
Submit Documentation Feedback
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
Operational Amplifier Electrical Characteristics
VCC+ = 5 V, VCC– = GND, R1 connected to VCC/2 (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
MIN
TYP
MAX
4.5
UNIT
mV
25°C
1
VIO
αVIO
IIO
Input offset voltage
Input offset voltage drift
Input offset current
Full range
25°C
6.5
10
5
µV/°C
nA
25°C
20
40
Full range
25°C
20
100
100
100
200
IIB
Input bias current
nA
Full range
25°C
50
25
VCC+ = 30 V, R1 = 10 kΩ,
VO = 5 V to 25 V
AVD
Large-signal voltage gain
Supply-voltage rejection ratio
Input common-mode voltage
V/mV
dB
Full range
25°C
kSVR
VICM
VCC+ = 5 V to 30 V
80
25°C
VCC–
VCC–
VCC+ – 1.8
VCC+ – 2.2
V
Full range
VCC+ = 30 V,
VICM = 0 V to VCC+ – 1.8 V
CMRR
ISC
Common-mode rejection ratio
Short-circuit current
25°C
25°C
70
90
dB
Source
Sink
3
3
6
6
VID = ±1 V, VO = 2.5 V
VCC+ = 30 V, RL = 10 kΩ
RL = 10 kΩ
mA
25°C
Full range
25°C
27
26
28
VOH
High-level output voltage
V
130
170
200
VOL
SR
Low-level output voltage
Slew rate
mV
Full range
VCC = ±15 V, CL = 100 pF,
VI = ±10 V, RL = 10 kΩ
25°C
1.3
1.4
2
V/µs
GBW
Φm
Gain bandwidth product
Phase margin
RL = 10 kΩ, CL = 100 pF, f = 100 kHz
RL = 10 kΩ, CL = 100 pF
25°C
25°C
25°C
25°C
2.1
45
MHz
°
%
THD
Vn
Total harmonic distortion
Equivalent input noise voltage
0.01
19
f = 1 kHz
nV/√Hz
3
Submit Documentation Feedback
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
Comparator Electrical Characteristics
VCC+ = 5 V, VCC– = GND (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
MIN
TYP
MAX
UNIT
25°C
5
9
VIO
VID
IIO
Input offset voltage
mV
V
Full range
Comparator differential
input voltage
Full range
VCC+
25°C
Full range
25°C
50
150
250
400
Input offset current
nA
IIB
Input bias current
nA
Full range
25°C
0.1
nA
IOH
High-level output current
Low-level output voltage
VID = 1 V, VCC = VO = 30 V
VID = –1 V, Isink = 4 mA
Full range
25°C
1
400
700
µA
250
VOL
AVD
Isink
mV
Full range
VCC+ = 15 V, R1 = 15 kΩ,
VO = 1 V to 11 V
Large-signal voltage gain
Output sink current
25°C
200
16
V/mV
mA
VO = 1.5 V, VID = –1 V
25°C
25°C
6
0
0
VCC+ – 1.5
VCC+ – 2
Input common-mode
voltage range
VICM
V
Full range
25°C
tRESP
Response time(1)
R1 = 5.1 kΩ to VCC+, VREF = 1.4 V
1.3
µs
R1 = 5.1 kΩ to VCC+, VREF = 1.4 V,
VI = TTL
tRESP,large
Large-signal response time
25°C
300
ns
(1) The response-time specification is for 100-mV input step with 5-mV overdrive. For larger overdrive signals, 300 ns can be obtained.
4
Submit Documentation Feedback
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
Voltage-Reference Electrical Characteristics
PARAMETER
TEST CONDITIONS
TA
MIN
2.475
2.49
TYP
2.5
MAX
2.525
2.51
UNIT
TSM102
25°C
25°C
VKA = VREF, IK = 10 mA,
See Figure 1
VREF
Reference voltage(1)
V
TSM102A
2.5
Reference input voltage deviation
over temperature range(1)
VKA = VREF, IK = 10 mA,
See Figure 1
∆VREF
Full range
Full range
25°C
7
30
mV
DVREF
DT
Average temperature coefficient of
reference input voltage(2)
VKA = VREF, IK = 10 mA
±22
±100 ppm/°C
DVREF
DVKA
Ratio of change in reference voltage VKA = 3 V to 36 V, IK = 10 mA,
to change in cathode voltage
–1.1
1.5
–2
mV/V
µA
See Figure 2
25°C
2.5
3
IK = 10 mA, R1 = 10 kΩ, R2 = ∞,
See Figure 2
IREF
Reference input current
Full range
Reference input current deviation
over temperature range
IK = 10 mA, R1 = 10 kΩ, R2 = ∞,
See Figure 2
∆IREF
Full range
0.5
1
µA
Minimum cathode current
for regulation
Imin
VKA = VREF, See Figure 1
See Figure 3
25°C
25°C
0.5
1
mA
nA
IK,OFF
Off-state cathode current
180
500
(1) ∆VREF is defined as the difference between the maximum and minimum values obtained over the full temperature range.
∆VREF = VREF(MAX) – VREF(MIN)
(2) The temperature coefficient is defined as the slopes (positive and negative) of the voltage vs temperature limits within which the
reference voltage is specified.
VREF(MAX)
MAX
2.5 V
MIN
VREF(MIN)
Temperature
T1
T2
Temperature
25°C
5
Submit Documentation Feedback
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
PARAMETER MEASUREMENT INFORMATION
Input
VKA
IK
VREF
Figure 1. Test Circuit for VKA = VREF
Input
VKA
VKA = VREF (1 + (R1/R2)) + (IREF × R1)
IK
R1
IREF
R2
VREF
Figure 2. Test Circuit for VKA > VREF
Input
VKA
IOFF
Figure 3. Test Circuit for IOFF
6
Submit Documentation Feedback
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
TYPICAL CHARACTERISTICS
AMPLIFIER TOTAL HARMONIC DISTORTION
AMPLIFIER NOISE VOLTAGE
vs
vs
FREQUENCY
FREQUENCY
400
350
300
250
200
150
100
50
1
0.1
0.01
0.001
0.0001
0
100
1k
10k
100k
10
10
1k
10k
100k
f – Frequency – Hz
f – Frequency – Hz
Figure 4.
Figure 5.
GAIN AND PHASE
vs
FREQUENCY
VREF STABILITY
vs
CAPACITANCE
60
50
40
30
20
10
0
180
140
100
60
35
30
25
20
15
10
5
Phase
20
Gain
-20
-60
-100
-140
-180
-10
-20
-30
1k
10k
100k
1M
10M
f – Frequency – Hz
0
1
10
100
1000
10000
Capacitance – pF
Figure 6.
Figure 7.
7
Submit Documentation Feedback
TSM102, TSM102A
DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR,
AND VOLTAGE REFERENCE
www.ti.com
SLVS602–MARCH 2006
TYPICAL CHARACTERISTICS (continued)
VREF
vs
TEMPERATURE
2.515
IO = 100 mA
2.510
2.505
2.500
IO = 10 mA
2.495
2.490
IO = 1 mA
2.485
2.480
–40 –25 –10
5
20
35 50
65 80
95 110 125
Temperature – °C
Figure 8.
8
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
26-Aug-2013
PACKAGING INFORMATION
Orderable Device
TSM102AID
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
ACTIVE
SOIC
SOIC
D
16
16
16
16
16
16
16
16
16
16
16
16
40
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
TSM102AI
TSM102AIDG4
TSM102AIDR
TSM102AIDRG4
TSM102AIPW
TSM102AIPWG4
TSM102AIPWR
TSM102AIPWRG4
TSM102ID
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
D
D
40
2500
2500
90
Green (RoHS
& no Sb/Br)
TSM102AI
TSM102AI
TSM102AI
SN102AI
SN102AI
SN102AI
SN102AI
TSM102I
TSM102I
TSM102I
TSM102I
SOIC
Green (RoHS
& no Sb/Br)
SOIC
D
Green (RoHS
& no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
SOIC
PW
PW
PW
PW
D
Green (RoHS
& no Sb/Br)
90
Green (RoHS
& no Sb/Br)
2000
2000
40
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
TSM102IDG4
TSM102IDR
SOIC
D
40
Green (RoHS
& no Sb/Br)
SOIC
D
2500
2500
Green (RoHS
& no Sb/Br)
TSM102IDRG4
SOIC
D
Green (RoHS
& no Sb/Br)
TSM102IPWG4
TSM102IPWR
OBSOLETE
ACTIVE
TSSOP
TSSOP
PW
PW
16
16
TBD
Call TI
Call TI
-40 to 85
-40 to 85
SN102I
SN102I
2000
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TSM102IPWRG4
ACTIVE
TSSOP
PW
16
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
SN102I
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
26-Aug-2013
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
TSM102AIDR
TSM102AIPWR
TSM102IDR
SOIC
TSSOP
SOIC
D
PW
D
16
16
16
16
2500
2000
2500
2000
330.0
330.0
330.0
330.0
16.4
12.4
16.4
12.4
6.5
6.9
6.5
6.9
10.3
5.6
2.1
1.6
2.1
1.6
8.0
8.0
8.0
8.0
16.0
12.0
16.0
12.0
Q1
Q1
Q1
Q1
10.3
5.6
TSM102IPWR
TSSOP
PW
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
TSM102AIDR
TSM102AIPWR
TSM102IDR
SOIC
TSSOP
SOIC
D
PW
D
16
16
16
16
2500
2000
2500
2000
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
38.0
35.0
38.0
35.0
TSM102IPWR
TSSOP
PW
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
TSM102IN
DUAL OPERATIONAL AMPLIFIER - DUAL COMPARATOR AND ADJUSTABLE VOLTAGE REFERENCE
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明