TLP627(F) [TOSHIBA]
Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, LEAD FREE, PLASTIC, 11-5B2, DIP-4;型号: | TLP627(F) |
厂家: | TOSHIBA |
描述: | Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, LEAD FREE, PLASTIC, 11-5B2, DIP-4 输出元件 光电 |
文件: | 总8页 (文件大小:880K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TLP627,TLP627-2,TLP627-4
TOSHIBA Photocoupler GaAs IRED & Photo-Transistor
TLP627, TLP627-2, TLP627-4
Programmable Controllers
Unit: mm
DC-output Module
Telecommunication
TLP627
The TOSHIBA TLP627,-2 and -4 consist of a gallium arsenide infrared
emitting diode optically coupled to a Darlington connected phototransistor
which has an integral base-emitter resistor to optimize switching speed and
elevated temperature characteristics.
The TLP627-2 offers two isolated channels in eight lead plastic DIP, while
the TLP627-4 provide four isolated channels per package.
Collector-Emitter Voltage
Current Transfer Ratio
: 300 V (min)
: 1000 % (min)
TOSHIBA
11-5B2
Weight: 0.26 g (typ.)
UL recognized
: UL1577, File No. E67349
cUL recognized : CSA Component Acceptance Service No. 5A
File No.E67349
TLP627-2
SEMKO approved :9808210/01-03
EN60065,EN60950
(approved TLP627 and TLP627-2)
Option (D4) type
VDE approved : EN60747-5-5
Maximum operating insulation voltage: 890V
PK
Highest permissible over voltage: 8000V
PK
Note: When an EN 60747-5-5 approved type is needed,
please designate the “Option(D4)”.
TOSHIBA
11-10C4
Weight: 0.54 g (typ.)
Pin Configuration (top view)
TLP627-2
TLP627-4
TLP627
TLP627-4
8
1
1
2
4
3
1
16
2
3
7
6
2
3
15
14
1: ANODE
2: CATHODE
3: EMITTER
4:COLLECTOR
4
5
4
5
13
12
1,3: ANODE
2,4: CATHODE
5,7: EMITTER
6,8:COLLECTOR
6
7
11
10
TOSHIBA
11-20A3
9
8
Weight: 1.1 g (typ.)
1,3,5,7
2,4,6,8
: ANODE
: CATHODE
9,11,13,15 : EMITTER
10,12,14,16 :COLLECTOR
Start of commercial production
1984-08
1
2017-05-16
TLP627,TLP627-2,TLP627-4
Absolute Maximum Ratings (Ta=25°C)
Rating
Characteristics
Symbol
Unit
TLP627-2
TLP627-4
TLP627
Forward Current
I
60
50
mA
mA /°C
A
F
Forward Current Derating
Pulse Forward Current
Reverse Voltage
∆I /°C
F
-0.7(Ta≥39°C)
-0.5(Ta≥25°C)
I
1 (100μs pulse,100pps)
FP
V
P
5
V
R
D
Diode Power Dissipation
(1 Circuit)
100
70
mW
mW /°C
V
Diode Power Dissipation Derating
Collector-Emitter Voltage
(1 Circuit)
∆ P /°C
-1.2 (Ta≥39°C)
-0.7 (Ta≥25°C)
D
V
V
300
0.3
CEO
ECO
Emitter -Collector Voltage
Collector Current
V
I
150
mA
C
Collector Power Dissipation
(1 Circuit)
P
150(300(Note 1))
-1.5(-3.5(Note 1))
100
-1.0
mW
mW /°C
°C
C
Collector Power Dissipation Derating (Ta≥25°C,1 Circuit)
Operating Temperature Range
∆ P /°C
C
T
-55 to 100
opr
Storage Temperature Range
T
T
-55 to 125
260(10s)
°C
stg
Lead Soldering Temperature
°C
sol
Total Package Power Dissipation
Total Package Power Dissipation Derating (Ta≥25°C,1 Circuit)
Isolation Voltage (AC,60 s, R.H. ≤ 60%) (Note 2)
(1 Circuit)
P
250(320(Note 1))
-2.5(-3.2(Note 1))
5000
150
-1.5
mW
T
∆ P /°C
mW /°C
Vrms
T
BV
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: IF=20mA Max
Note 2: Device considered a two terminal device : LED side pins Shorted together and DETECTOR side pins shorted
together.
Recommended Operating Conditions
Characteristics
Supply Voltage
Symbol
Min
Typ.
Max
Unit
V
—
—
—
16
—
—
200
25
V
CC
Forward Current
I
mA
mA
°C
F
Collector Current
I
—
120
85
C
Operating Temperature
T
-25
opr
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2017-05-16
TLP627,TLP627-2,TLP627-4
Electrical Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward Voltage
Reverse Current
Capacitance
V
I
= 10 mA
F
1.0
—
1.15
—
1.3
10
—
V
F
I
V
= 5 V
R
μA
pF
R
C
V = 0 V, f=1MHz
—
30
T
Collector-Emitter
V
V
I
I
= 0.1mA
= 0.1mA
300
0.3
—
—
—
—
V
V
(BR)CEO
(BR)ECO
C
E
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
V
V
= 200V
—
—
10
—
200
20
nA
CE
CE
Collector Dark Current
I
CEO
= 200V, Ta = 85°C
μA
Capacitance Collector
to Emitter
C
CE
V=0 V, f=1MHz
—
10
—
pF
Coupled Electrical Characteristics (Ta=25°C)
Characteristics
Current Transfer Ratio
Symbol
I /I
Test Condition
I =1mA, V =1V
Min
Typ.
Max
Unit
1000
500
—
4000
—
—
—
%
%
C F
F
CE
Saturated CTR
I /I (sat)
C F
I =10mA, V =1V
F CE
I =10mA, I =1mA
—
1.0
1.2
C
F
Collector-Emitter
V
(sat)
V
CE
Saturation Voltage
0.3
I =100mA, I =10mA
—
C
F
Isolation Electrical Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
V =0 V, f=1MHz
Min
—
Typ.
0.8
Max
Unit
Capacitance Input to Output
Isolation Resistance
C
R
—
—
—
—
—
pF
S
S
10
14
V =500V, R.H.≤60%
S
5×10
5000
—
10
Ω
S
AC, 60 s
—
Vrms
Vdc
Isolation Voltage
BV
AC, 1s, in oil
DC, 60 s, in oil
10000
10000
S
—
3
2017-05-16
TLP627,TLP627-2,TLP627-4
Switching Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Rise Time
Fall Time
t
—
—
—
—
—
—
—
40
15
50
15
5
—
—
—
—
—
—
—
r
V
=10V
CC
t
f
I =10mA
C
Turn-on Time
Turn-off Time
Turn-on Time
Strage Time
Turn-off Time
t
t
on
off
R =100Ω
L
μs
t
ON
R =180Ω (Fig.1)
L
t
40
80
s
V
=10V, I =16mA
F
CC
t
OFF
Fig.1 Switching Time Test Circuit
4
2017-05-16
TLP627,TLP627-2,TLP627-4
5
2017-05-16
TLP627,TLP627-2,TLP627-4
6
2017-05-16
TLP627,TLP627-2,TLP627-4
I
I
CEO
CEO
10-3
NORMALIZED I
C
7
2017-05-16
TLP627,TLP627-2,TLP627-4
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export
laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export
Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in
compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
8
2017-05-16
相关型号:
TLP627(T)
Optocoupler - Transistor Output, DARLINGTON-NPN-OUTPUT DC-INPUT OPTOCOUPLER,1-CHANNEL,5KV ISOLATION,DIP
TOSHIBA
TLP627(TP1)
Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP627(TP5)
Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP627-2(LF2)
Optocoupler - Transistor Output, 2 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-8
TOSHIBA
TLP627-2(LF5)
Optocoupler - Transistor Output, 2 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-8
TOSHIBA
TLP627-3
Optocoupler - Transistor Output, 3 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-12
TOSHIBA
©2020 ICPDF网 联系我们和版权申明