857215-EVB [TRIQUINT]
1090 MHz SAW filter;
| 型号： | 857215-EVB |
| 厂家： | 
TRIQUINT SEMICONDUCTOR |
| 描述： | 1090 MHz SAW filter |
| 文件： | 总6页 (文件大小：544K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
857215
1090 MHz SAW filter
Applications
General purpose RF filter
SMP-12, 3.00 x 3.00 x 1.22 mm
Product Features
Functional Block Diagram
Top View
Usable bandwidth 10 MHz
High attenuation
6
1
Gnd
Gnd
Low Loss
Excellent power handling
Single-ended operation
Input
Output
5
4
2
3
No Matching required for operation at 50Ω
Small Size: 3.00 x 3.00 x 1.22 mm
Ceramic Surface Mount Package (SMP)
Gnd
Gnd
Hermetically sealed
Pb
RoHS compliant, Pb-free
General Description
Pin Configuration - Single Ended
857215 is a general purpose RF filter designed in a
3x3mm hermetic package
Pin No.
2
Label
Input
5
Output
Ground
1.3,4,6
Ordering Information
Part No.
857215
Description
Product description
857215-EVB
Evaluation board description
Standard T/R size = 5000 units/reel
Preliminary Data Sheet: Rev B 07-11-2014
Disclaimer: Subject to change without notice
- 1 of 6 -
© 2014 TriQuint
857215
1090 MHz SAW filter
Absolute Maximum Ratings
1. Operation of this device outside the parameter ranges given
may cause permanent damage.
2. Specifications are not guaranteed over all operable
conditions.
Parameter
Rating
Storage Temperature (1)
Operable Temperature (2)
RF Input Power (3)
-55 to +85°C
-55 to +85°C
+15 dBm
3. Input power with applied CW signal at +85°C for 10K hours
Electrical Specifications (1)
Test conditions unless otherwise noted: (2) Temp= -ꢀ55°C to +ꢀ85°C
Parameter (3)
Conditions
Min
Typ (4) Max
Units
Center Frequency
-
1090
-
MHz
Maximum Insertion Loss
Amplitude Variation (5)
Group Delay Variation
1085 – 1095 MHz
-
-
2.6
0.2
4.0
dB
1085 – 1095 MHz
1.25
dB p-p
1085 – 1095 MHz
-
17.45
37
ns
1.25 dB Lower Bandedge (6)
1.25 dB Upper Bandedge
-
1079.39
1100.89
1085
1095
MHz
MHz
1095
500 – 1006 MHz
1006 – 1040 MHz
1040 – 1050 MHz
1140 – 1160 MHz
1160 – 1300 MHz
1300 – 1600 MHz
54
50
48
50
54
48
61
61
52
61
58
53
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
Relative Attenuation (7)
Source Impedance (8)
single-ended
single-ended
-
-
50
50
-
-
Ohms
Ohms
(8)
Load Impedance
Notes:
1. All specifications are based on the TriQuint schematic shown on page 3
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance
over temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
4. Typical values are based on average measurements at room temperature
5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency
points
6. Relative to loss at 1090 MHz
7. Relative to zero dB
8. This is the optimum impedance in order to achieve the performance shown
Preliminary Data Sheet: Rev B 07-11-2014
Disclaimer: Subject to change without notice
- 2 of 6 -
© 2014 TriQuint
857215
1090 MHz SAW filter
Part Number Evaluation Board
Matching Schematics
2
5
50
50
1,3,4,6
960700
Notes:
1. No impedance matching required.
2. PCB:Top, middle & bottom layers: 1 oz copper, Substrates:FR4 dielectric, 031” thick Finish plating: Nickel: 3-8µm thick,
Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick
Bill of Material – 857215-EVB
Reference Des.
Value Description
Manuf.
Part Number
DUT
SMA
PCB
-
-
-
1090 MHz SAW filter
TriQuint
857215
SMA connector
3-Layer
Radiall USA Inc. 9602-1111-018
Multiple 960700
PCB Mounting Pattern
Notes:
3.20 SQ
.96
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the TriQuint
evaluation board for this product. Some modification may be necessary
to suit end user assembly materials and processes.
1.70
1.27
.81
.38
Preliminary Data Sheet: Rev B 07-11-2014
Disclaimer: Subject to change without notice
- 3 of 6 -
© 2014 TriQuint
857215
1090 MHz SAW filter
Performance Plots
Test conditions unless otherwise noted: Temp= +25°C
Preliminary Data Sheet: Rev B 07-11-2014
Disclaimer: Subject to change without notice
- 4 of 6 -
© 2014 TriQuint
857215
1090 MHz SAW filter
Package Information, Marking and Dimensions
Package Style: SMP-12A
Dimensions: 3.00 x 3.00 x 1.22 mm
TriQuint
logo
Marking
code
Date code
Body: Al2O3 ceramic
KL
ID dot
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating
YYWW
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
1.22 NOM.
1.32 MAX.
0.69
The date code consists of, YY = last 2 digits of the year, and
WW = 2 digits of worked week
3.00
0.75
1.50
Notes:
1. All dimensions shown are typical in millimeters
2. An asterisk (*) in front of the marking code indicates prototype.
3.00
0.75
0.60
Tape and Reel information
Standard T/R size = 5000 units/reel. All dimensions are in millimeters
TriQuint
12.8
logo
ID dot
2.7
Ø330
Section A-A
0.21
4.0
Ø1.5
A
1.75
5.5
2.0
Ø102
Ø20.2
Ø13.0
Direction of travel
12.0
2.0
3.25
3.25
4.0
Ø1.5
1.4
A
Preliminary Data Sheet: Rev B 07-11-2014
Disclaimer: Subject to change without notice
- 5 of 6 -
© 2014 TriQuint
857215
1090 MHz SAW filter
Product Compliance Information
ESD Sensitivity Ratings
Solderability
Compatible with both lead-free (260°C maximum
reflow temperature) and tin/lead (245°C maximum
reflow temperature) soldering processes.
Caution! ESD-Sensitive Device
Refer to Soldering Profile for recommended guidelines.
ESD Rating: Class 0
Value:
Test:
Passes ≥ 300V to < 350 V
RoHs Compliance
Electrostatic Discharge Sensitivity Testing,
Human Body Model (HBM) - component level
Standard: ESDA/JEDEC JS-001-2012
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment).
ESD Rating: Class C1
Value:
Test:
Standard:
Passes 100 V to < 150 V
This product also has the following attributes:
Machine Model (MM)
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
JEDEC Standard JESD22-A115
MSL Rating
Not applicable. Hermetic package.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and
information about TriQuint:
Web: www.triquint.com
Email: info-sales@tqs.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information: Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.
The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated
with such information is entirely with the user. All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe
personal injury or death.
Preliminary Data Sheet: Rev B 07-11-2014
Disclaimer: Subject to change without notice
- 6 of 6 -
© 2014 TriQuint
相关型号：
©2020 ICPDF网 联系我们和版权申明