OPB772NZ_技术文档

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Features:

OPB760N

•

Choice of mounting conﬁgurations

Choice of four output conﬁgurations

.040” (10.160 mm) PCBoard mount (N and T series)

12” (304.800 mm) AWG 26 wires (NZ and TZ series)

OPB775TZ

Description:

The OPB760N, OPB760T, OPB770N and OPB770T series of reﬂecꢀve assemblies feature Photologic^®output. The electrical

output can be speciﬁed as either TTL Totem-Pole or TTL Open-Collector, either of which can be supplied with inverter or

buﬀer output polarity.

OPB760N and OPB760T series devices are designed for PCBoard mounꢀng and have 0.04” (10 mm) long leads.

OPB760T and OPB770T series devices are designed for remote mounꢀng with two mounꢀng tabs.

OPB770NZ and OPB770TZ series devices have 12” (305 mm) long, UL approved 26 AWG wires.

All devices in this series oﬀer the added stability of a built-in hysteresis ampliﬁer.

Custom electrical, wire and cabling and connectors are available. Contact your local representaꢀve or OPTEK for more

informaꢀon.

Ordering Information

Part

LED Peak

Sensor

Reﬂection Distance

(Inch) Min / Max

Applications:

Number Wavelength

OPB760N

Photologic®

Mounting

•

Non-contact Photologic®

Totem-Pole

Open Collector

Inv-Totem-Pole

Inv-Open Collector

Totem-Pole

Open Collector

Inv-Totem-Pole

Inv-Open Collector

Totem-Pole

reﬂective object sensor

Assembly line automation

Machine automation

Machine safety

OPB761N

OPB762N

OPB763N

OPB760T

OPB761T

OPB762T

OPB763T

OPB770NZ

•

PCBoard .40”

(10.160 mm)

leads)

End of travel sensor

Door sensor

890 nm

0.080" / 0.220”

OPB771NZ

OPB772NZ

OPB773NZ

OPB770TZ

OPB771TZ

OPB772TZ

OPB773TZ

Open Collector

Inv-Totem-Pole

Inv-Open Collector

Totem-Pole

Open Collector

Inv-Totem-Pole

Inv-Open Collector

12” (304.800 mm)

26 AWG wire

RoHS

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 1

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Electrical Speciﬁcations

OPB760, OPB770 Buffered Totem-Pole

OPB761, OPB771 Buffered Open Collector

V_CC

OUT

GND

OPB762, OPB772 Inverted Totem-Pole

OPB763, OPB773 Inverted Open-Collector

V_CC

OUT

GND

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 2

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Electrical Speciﬁcations

OPB760 (N and T Series)

OPB770 (NZ and TZ Series)

[ MILLIMETERS]

INCHES

DIMENSIONS ARE IN:

X = 0.08” [2.0mm] to 0.22” [5.6mm]

Pin # Description

Pin#

Description

Ground

Output

Color/Pin# Description Color/Pin# Description

Red-4

Anode

White-1

Blue-2

V_CC

1

2

Cathode

Anode

3

4

5

Black-5

Cathode

Output

Ground

Green-3

V_CC

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 3

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Electrical Speciﬁcations

Absolute Maximum Ratings (T_A=25°C unless otherwise noted)

Supply Voltage, V_CC(not to exceed 3 seconds)

Storage Temperature Range

10 V

-40° C to +85° C

-40° C to +70° C

260° C

Operating Temperature Range

Lead Soldering Temperature (1/16” inch (1.6 mm) from case for 5 seconds with soldering iron)⁽¹⁾

Input Diode Power Dissipation⁽²⁾

100 mW

200 mW

300 mW

35 V

Output Photologic® Power Dissipation⁽³⁾

Total Device Power Dissipation⁽⁴⁾

Voltage at Output Lead (Open Collector Output)

Diode Forward DC Current

40 mA

Diode Reverse DC Voltage

3 V

Electrical Characteristics (T_A= 25°C unless otherwise noted)

SYMBOL

PARAMETER

MIN TYP MAX UNITS

TEST CONDITIONS

Input Diode

V_F

I_R

Forward Voltage

Reverse Current

-

1.8

V

I_F= 40 mA, T_A= 25° C

V_R= 2.0 V, T_A= 25° C

100

μA

Output Photologic® Sensor

V_CCOperating DC Supply Voltage

4.75

-

5.25

V

Low Level Supply Current:

Buffered Totem-Pole Output⁽⁵⁾⁽⁶⁾

Buffered Open-Collector Output⁽⁵⁾⁽⁶⁾

-

10

mA

Vcc = 5.25 V, If = 0 mA (output open)

Vcc = 5.25 V, If = 25 mA (output open)

I_CCL

Inverted Totem-Pole Output⁽⁵⁾

-

10

mA

Inverted Open-Collector Output⁽⁵⁾

High Level Supply Current:

Buffered Totem-Pole Output⁽⁵⁾⁽⁶⁾

Buffered Open-Collector Output⁽⁵⁾

-

10

mA

Vcc = 5.25 V, If = 25 mA (output open)

Vcc = 5.25 V, If = 0 mA (output open)

I_CCH

Inverted Totem-Pole Output⁽⁵⁾⁽⁶⁾

-

10

mA

Inverted Open-Collector Output⁽⁵⁾⁽⁶⁾

High Level Output Current:

-

100

μA

Vcc = 4.5 V, If = 25 mA, V_OH= 30 V, T_A=25°C

Vcc = 4.5 V, If = 0 mA, V_OH= 30 V, T_A= 25°C

Buffered Open-Collector Output

I_OH

Inverted Open-Collector Output

-

100

μA

Notes:

(1) RMA ﬂux is recommended. Duration can be extended to 10 seconds maximum when ﬂow soldering.

(2) Derate linearly 2.22 mW/°C above 25° C.

(3) Derate linearly 4.44 mW/°C above 25° C.

(4) Derate linearly 6.66 mW/°C above 25° C.Normal application would be with light source blocked, simulated by I_F=0 mA.

(5) Tested at d = 0.080” (mm) from a 90% diffuse white test surface.

(6) Normal application would be with light source blocked, simulated by I_F= 0 mA.

(7) All parameters tested using pulse technique.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 4

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Electrical Speciﬁcations

Electrical Characteristics (T_A= 25°C unless otherwise noted)

SYMBOL

PARAMETER

MIN TYP MAX UNITS

TEST CONDITIONS

Output Photologic® Sensor (continued)

I_F(+)

LED Positive-Going Threshold Current⁽²⁾

-

25

mA

-

Vcc = 5 V, T_A= 25° C

I_F(+)/I_F(-)

Hysteresis⁽²⁾

1.1

2.0

Vcc = 5 V

Short Circuit Output Current:

Buffered Totem-Pole Output⁽¹⁾

If = 25 mA, Vcc = 5.25 V, Output = GRD

If = 0 mA, Vcc = 5.25 V, Output = GRD

-15

-

-100

mA

I_OS

Inverted Totem-Pole Output⁽¹⁾

Low Level Output Voltage:

Buffered Totem-Pole Output⁽¹⁾⁽⁴⁾

Buffered Open-Collector Output⁽¹⁾⁽⁴⁾

-

0.4

V

V_CC= 4.5 V, I_OL= 12.8 mA, I_F= 0 mA or I_F=

30 mA

V_OL

Inverted Totem-Pole Output

-

0.4

V

V_CC= 4.5 V, I_OL= 12.8 mA, I_F= 25 mA

Inverted Open-Collector Output⁽¹⁾⁽⁴⁾

High Level Output Voltage:

V_CC= 4.5 V, I_OH= -800 μA, I_F= 25 mA

V_CC= 4.5 V, I_OH= -800 μA, I_F= 0 mA

Buffered Totem-Pole Output⁽¹⁾

2.4

-

V

Inverted Totem-Pole Output⁽¹⁾⁽⁴⁾

V_OH

Inverted Totem-Pole Output ⁽³⁾

Inverted Open-Collector Output⁽³⁾

2.4

-

V

V_CC= 4.5 V, I_OH= -800 μA, I_F= 30 mA

Notes:

(1) Tested at d = 0.080” (mm) from a 90% diffuse white test surface.

(2) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 90% diffuse white test surface. Reference: Eastman Kodak,

Catalog #E 152 7795.

(3) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 5% diffuse black test surface.

(4) Normal application would be with light source blocked, simulated by I_F=0 mA.

(5) OPB760N through OPB763N series devices are terminated with 0.20” (mm) square leads designed for printed PCBoard mounting.

(6) OPB770NZ through OPB773NZ series devices are terminated with 12 inches (mm) of 7-strand 26 AWG UL1429 insulated wire on

each terminal. A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire

harnesses.

(7) OPB760T through OPB763T series devices are terminated with 0.020” (mm) square leads designed for printed PCBoard

mounting.

(8) OPB770TZ through OPB773TZ series are terminated with 12” (mm) of 7-strand 26 AWG UL1429 insulated wire on each terminal.

A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses.

(9) All parameters tested using pulse technique.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 5

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Performance

Logic Level vs Distance

1

0

1

0

Kodak 90% - Towards

Copy Paper - Towards

Copy Paper - Away

Kodak 90% - Away

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.0

0.1

0.2

0.3

0.4

0.5

0.6

Distance (inches)

Logic Level vs Distance

1

0

1

0

Kodak 19% - Towards

Avery Labels - Towards

Avery Labels - Away

Kodak 19% - Away

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.0

0.1

0.2

0.3

0.4

0.5

0.6

Distance (inches)

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 6

Photologic® Reflective Object

Sensor

OPB760, OPB761, OPB762, OPB763 (Series N and T)

OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)

Performance

Typical Trigger Current and Hysteresis Ratio

vs Ambient Temperature

Logic Level vs Distance

1

0

14

12

10

8

IF(+) mA

IF(-) mA

Hys

Retro 3M 3870 - Towards

6

Retro 3M 3870 - Away

4

2

0

-40 -30 -20 -10

0

10 20 30 40 50 60 70 80

0.0

0.1

0.2

0.3

0.4

0.5

0.6

Distance (inches)

Ta - Ambient Temperature (°C)

Output Voltage vs Ambient Temperature

Supply Current vs Ambient Temperature

18

16

14

12

10

8

9

8

7

6

5

4

3

2

1

0

6

4

Icch(mA)

Voh (V)

Iccl(mA)

Vol (V)

2

0

-40

-20

0

20

40

60

80

-40

-20

0

20

40

60

80

Ta -Ambient Temperature - (°C)

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue C 05/2016 Page 7


型号：	OPB772NZ
厂家：	TT Electronics
描述：	Photologic Reflective Object Sensor
文件：	总7页 (文件大小：398K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

OPB772NZ [TTELEC]

相关型号：

OPB772TZ

OPB773NZ

OPB773TZ

OPB800

OPB800L51Z

OPB800L55Z

OPB800W51

OPB800W51Z

OPB800W55Z

OPB801L51

OPB801L51Z

OPB801L55Z