TFS280A [VECTRON]

Filter Specification; 过滤器规格
TFS280A
型号: TFS280A
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter Specification
过滤器规格

过滤器
文件: 总4页 (文件大小:45K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
tfS280a.doc  
version 1.3  
11/98  
______________________________________________________________________________________________________  
V__I__T_E__L__E_F__IL__T_E__R_____________________________________________________________________________________  
Filter Specification  
TFS 280 A  
-
1/4  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedances  
for input:  
23 °C  
dBm  
0
605 // -1.1 pF  
605 // -1.1 pF  
for output:  
Construction and pin configuration  
see page 2  
Characteristics  
Remark:  
Reference level for the relative attenuation a of the TFS 280 A is the minimum of the pass band attenuation a  
. The minimum of the pass band  
min  
rel  
attenuation a  
min  
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3  
e o  
dB filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed on 280,455 MHz without tolerance. The given values for  
e
N
the relative attenuation a and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency f is shifted  
due to the temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .  
rel  
o
f
o
D a t a  
typ. value  
tolerance/limit  
______________________________________________________________________________________________________  
Insertion loss  
(Reference level)  
a
= a  
min  
-
max.  
5
dB  
e
______________________________________________________________________________________________________  
Nominal frequency  
f
-
280,455 MHz  
N
______________________________________________________________________________________________________  
Guaranteed 3 dB signal band width BW 165 kHz min. 70 kHz  
______________________________________________________________________________________________________  
Relative attenuation  
a
rel  
f
±
35 kHz  
-
max.  
3
dB  
N
f
f
± 200 kHz  
± 420 kHz  
-
-
min.  
min.  
10  
55  
dB  
dB  
N
N
Ultimate rejection  
63  
dB  
______________________________________________________________________________________________________  
Group delay ripple  
35 kHz  
GD  
f
±
-
max.  
2
µs  
N
______________________________________________________________________________________________________  
Intermodulation  
Input IP-3  
-
min. + 15  
______________________________________________________________________________________________________  
Operating temperature range - 20 °C ... + 85 °C  
dBm  
(f ± 25 kHz and f ± 50 kHz each of -20 dBm)  
N
N
__________________________________________________________________________________________  
Storage temperature range - 40 °C ... + 85 °C  
__________________________________________________________________________________________  
Temperature coefficient of frequency TC ca. - 0.036 ppm/K²  
__________________________________________________________________________________________  
Frequency inversion temperature  
+ 30 °C  
______________________________________________________________________________________________________  
Generated:  
Checked / approved:  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfS280a.doc  
version 1.3  
11/98  
______________________________________________________________________________________________________  
V__I__T_E__L__E_F__IL__T_E__R_____________________________________________________________________________________  
Filter Specification  
TFS 280 A  
-
2/4  
Construction, pin configuration and 50 - matching network  
(All dimensions in mm)  
S 280 A  
KN  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfS280a.doc  
version 1.3  
11/98  
______________________________________________________________________________________________________  
V__I__T_E__L__E_F__IL__T_E__R_____________________________________________________________________________________  
Filter Specification  
TFS 280 A  
-
3/4  
Stability Characteristics  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
100g, 18 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,075 mm or 1g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Damp heat:  
(steady state)  
90 % to 95 % rel. humidity, 40 °C, 10 days;  
DIN IEC 68 - 2 - 3  
4. Resistance to  
solder heat (reflow):  
max. 2 times reflow process;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4;  
Packing  
Tape & Reel:  
IEC 286 - 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel: 3400  
Tape (all dimensions in mm)  
EMBOSSED CARRIER TAPE  
W
Po  
Do  
D1  
E
:
:
:
:
:
:
16  
4
± 0,3  
± 0,1  
Po  
P 2  
D
o
1,5 + 0,5  
1,5 + 0,5  
1,75 ± 0,1  
7,5 ± 0,1  
0,75  
E
F
Ao  
D1  
F
± 0,1  
13,4  
W
Bo  
G (min) :  
P2  
P1  
:
2
8
± 0,05  
± 0,1  
G
:
D1(min) : 1,5  
P1  
Ao  
Bo  
:
:
5,4 ± 0,1  
7,4 ± 0,1  
COVER TAPE  
W
2
Reel (all dimensions in mm):  
A
:
330  
W1  
:
:
16,4 +2  
W2 (max) :  
22,4  
N (min)  
C
>= 90  
C
A
:
13  
± 0,25  
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.  
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on  
the right side of the tape.  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfS280a.doc  
version 1.3  
11/98  
______________________________________________________________________________________________________  
V__I__T_E__L__E_F__IL__T_E__R_____________________________________________________________________________________  
Filter Specification  
TFS 280 A  
-
4/4  
Air reflow temperature conditions  
1st and 2nd air reflow profile  
Name: pre-heating periods  
main-heating periods  
over 200 °C  
peak temperature  
255 °C ± 5 °C  
Temperature: 150 °C - 170 °C  
Time:  
60 sec. - 90 sec.  
20 sec. - 25 sec.  
Chip-mount air reflow profile  
260  
240  
220  
200  
180  
160  
140  
120  
100  
80  
60  
40  
20  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
200  
220  
240  
time / sec.  
Table for temperature vs. time during the air reflow process  
Tolerance of temperatures: ± 5 °C  
time / sec.  
0
temperature / °C  
time / sec.  
140  
150  
160  
170  
180  
190  
195  
200  
205  
210  
215  
220  
230  
240  
temperature / °C  
23  
34  
46  
60  
80  
103  
121  
134  
143  
150  
154  
156  
158  
159  
160  
161  
164  
170  
180  
205  
230  
255  
230  
205  
180  
165  
140  
120  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
110  
120  
130  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS280F

Filter specification
VECTRON

TFS280G

Filter specification
VECTRON

TFS280G_06

Filter specification
VECTRON

TFS280H

Filter specification
VECTRON

TFS280H_06

Filter specification
VECTRON

TFS280K_04

Filter specification
VECTRON

TFS280L_04

Filter specification
VECTRON

TFS280R

Vectron International Filter specification
VECTRON

TFS281

Vectron International Filter specification
VECTRON

TFS281A

Vectron International Filter specification
VECTRON

TFS282A

Filter Specification
VECTRON

TFS282A1

Filter Specification
VECTRON