IRLZ34S [VISHAY]
Power MOSFET; 功率MOSFET
| 型号： | IRLZ34S |
| 厂家： | 
VISHAY |
| 描述： | Power MOSFET |
| 文件： | 总8页 (文件大小：346K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
Power MOSFET
FEATURES
PRODUCT SUMMARY
VDS (V)
• Halogen-free According to IEC 61249-2-21
Definition
60
• Advanced Process Technology
RDS(on) ()
VGS = 5 V
0.05
• Surface Mount (IRLZ34S, SiHLZ34S)
• Low-Profile Through-Hole (IRLZ34L, SiHLZ34L)
• 175 °C Operating Temperature
• Fast Switching
Qg (Max.) (nC)
35
7.1
Q
Q
gs (nC)
gd (nC)
25
• Fully Avalanche Rated
• Compliant to RoHS Directive 2002/95/EC
Configuration
Single
D
DESCRIPTION
D2PAK (TO-263)
Third generation Power MOSFETs from Vishay utilize
advanced processing techniques to achieve extremely low
on-resistance per silicon area. This benefit, combined with
the fast swichting speed and ruggedized device design that
Power MOSFETs are known for, provides the designer with
an extremely efficient and reliable device for use in a wide
variety of applications.
I2PAK (TO-262)
G
G
D
S
D
S
G
The D2PAK is a surface mount power package capable of
S
accommodating die sizes up to HEX-4. It provides the
highest power capability and the lowest possible
on-resistance in any existing surface mount package. The
D2PAK is suitable for high current applications because of
its low internal connection resistance and can dissipate up
to 2.0 W in a typical surface mount application.
N-Channel MOSFET
The through-hole version (IRLZ34L, SiHLZ34L) is available
for low-profile applications.
ORDERING INFORMATION
Package
D2PAK (TO-263)
I2PAK (TO-262)
-
Lead (Pb) free and Halogen-free
SiHLZ34S-GE3
-
-
IRLZ34LPbF
SiHLZ34L-E3
Lead (Pb) free
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
UNIT
Drain-Source Voltage
Gate-Source Voltage
VDS
60
V
VGS
10
TC = 25 °C
C = 100 °C
30
21
Continuous Drain Current
VGS at 5 V
ID
T
A
Pulsed Drain Currenta
IDM
110
Linear Derating Factor
Single Pulse Avalanche Energyb
0.59
W/°C
mJ
EAS
PD
128
Maximum Power Dissipation
Maximum Power Dissipation (PCB Mount)e
Peak Diode Recovery dV/dtc
T
C = 25 °C
88
W
V/ns
°C
TA = 25 °C
3.7
dV/dt
4.5
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)
TJ, Tstg
- 55 to + 175
300d
for 10 s
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. VDD = 25 V, Starting TJ = 25 °C, L = 285 μH, Rg = 25 , IAS = 30 A (see fig. 12).
c. ISD 30 A, dI/dt 200 A/μs, VDD VDS, TJ 175 °C.
d. 1.6 mm from case.
e. When mounted on 1" square PCB (FR-4 or G-10 material).
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 90418
S11-1044-Rev. D, 30-May-11
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
40
UNIT
Maximum Junction-to-Ambient
(PCB Mount)a
RthJA
-
-
-
-
°C/W
Maximum Junction-to-Case (Drain)
RthJC
1.7
Note
a. When mounted on 1" square PCB (FR-4 or G-10 material).
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX. UNIT
Static
Drain-Source Breakdown Voltage
VDS
VDS/TJ
VGS(th)
IGSS
VGS = 0, ID = 250 μA
Reference to 25 °C, ID = 1 mA
VDS = VGS, ID = 250 μA
60
-
-
-
V
V/°C
V
VDS Temperature Coefficient
0.07
-
Gate-Source Threshold Voltage
Gate-Source Leakage
1.0
-
-
-
-
-
-
-
-
2.0
100
25
VGS
=
10 V
nA
VDS = 60 V, VGS = 0 V
-
Zero Gate Voltage Drain Current
Drain-Source On-State Resistance
IDSS
μA
V
DS = 48 V, VGS = 0 V, TJ = 150 °C
-
250
0.05
0.07
-
VGS = 5 V
VGS = 4 V
ID = 18 Ab
ID = 15 Ab
-
RDS(on)
gfs
-
Forward Transconductance
Dynamic
VDS = 25 V, ID = 18 A
12
S
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Ciss
Coss
Crss
Qg
-
-
-
-
-
-
-
-
-
-
1600
660
170
-
-
-
VGS = 0 V,
VDS = 25 V,
pF
nC
f = 1.0 MHz, see fig. 5
-
35
7.1
25
-
ID = 30 A, VDS = 48 V,
see fig. 6 and 13b
Qgs
Qgd
td(on)
tr
V
GS = 5 V
-
-
14
170
30
56
-
VDD = 30 V, ID = 30 A,
ns
Rg = 6 , RD = 1 , see fig. 10b
Turn-Off Delay Time
Fall Time
td(off)
tf
-
-
Between lead,
and center of die contact
Internal Source Inductance
LS
-
7.5
-
nH
Drain-Source Body Diode Characteristics
Continuous Source-Drain Diode Current
D
MOSFET symbol
showing the
integral reverse
p - n junction diode
IS
-
-
-
-
30
A
G
Pulsed Diode Forward Currenta
ISM
110
S
Body Diode Voltage
VSD
trr
TJ = 25 °C, IS = 30 A, VGS = 0 Vb
-
-
-
-
1.6
180
V
Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge
Forward Turn-On Time
120
700
ns
nC
TJ = 25 °C, IF = 30 A, dI/dt = 100 A/μsb
Qrr
ton
1300
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. Pulse width 300 μs; duty cycle 2 %.
www.vishay.com
2
Document Number: 90418
S11-1044-Rev. D, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Fig. 1 - Typical Output Characteristics, TC = 25 °C
Fig. 3 - Typical Transfer Characteristics
Fig. 2 - Typical Output Characteristics, TC = 175 °C
Fig. 4 - Normalized On-Resistance vs. Temperature
Document Number: 90418
S11-1044-Rev. D, 30-May-11
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
Fig. 7 - Typical Source-Drain Diode Forward Voltage
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage
Fig. 8 - Maximum Safe Operating Area
www.vishay.com
4
Document Number: 90418
S11-1044-Rev. D, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
RD
VDS
VGS
D.U.T.
Rg
+
V
-
DD
5 V
Pulse width ≤ 1 µs
Duty factor ≤ 0.1 %
Fig. 10a - Switching Time Test Circuit
VDS
90 %
10 %
VGS
td(on) tr
td(off) tf
Fig. 9 - Maximum Drain Current vs. Case Temperature
Fig. 10b - Switching Time Waveforms
Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
Document Number: 90418
S11-1044-Rev. D, 30-May-11
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
L
VDS
VDS
Vary tp to obtain
required IAS
tp
VDD
Rg
D.U.T.
IAS
+
-
VDD
VDS
5 V
0.01 W
IAS
tp
Fig. 12a - Unclamped Inductive Test Circuit
Fig. 12b - Unclamped Inductive Waveforms
Fig. 12c - Maximum Avalanche Energy vs. Drain Current
Current regulator
Same type as D.U.T.
50 kΩ
QG
5 V
12 V
0.2 µF
0.3 µF
QGS
QGD
+
-
VDS
D.U.T.
VG
VGS
3 mA
Charge
IG
ID
Current sampling resistors
Fig. 13a - Basic Gate Charge Waveform
Fig. 13b - Gate Charge Test Circuit
www.vishay.com
6
Document Number: 90418
S11-1044-Rev. D, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRLZ34S, IRLZ34L, SiHLZ34S, SiHLZ34L
Vishay Siliconix
Peak Diode Recovery dV/dt Test Circuit
+
Circuit layout considerations
• Low stray inductance
• Ground plane
D.U.T.
• Low leakage inductance
current transformer
-
+
-
-
+
Rg
• dV/dt controlled by Rg
• Driver same type as D.U.T.
• ISD controlled by duty factor “D”
• D.U.T. - device under test
+
-
VDD
Driver gate drive
P.W.
P.W.
D =
Period
Period
VGS = 10 Va
D.U.T. lSD waveform
D.U.T. VDS waveform
Reverse
recovery
current
Body diode forward
current
dI/dt
Diode recovery
dV/dt
VDD
Re-applied
voltage
Body diode forward drop
Inductor current
ISD
Ripple ≤ 5 %
Note
a. VGS = 5 V for logic level devices
Fig. 14 - For N-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?90418.
Document Number: 90418
S11-1044-Rev. D, 30-May-11
www.vishay.com
7
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
IRLZ34STRL
Power Field-Effect Transistor, 30A I(D), 60V, 0.05ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, D2PAK-3
VISHAY
IRLZ44-003
Power Field-Effect Transistor, 50A I(D), 60V, 0.028ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB
INFINEON
IRLZ44-003PBF
Power Field-Effect Transistor, 50A I(D), 60V, 0.028ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB
INFINEON
IRLZ44-004
Power Field-Effect Transistor, 50A I(D), 60V, 0.028ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB
INFINEON
IRLZ44-004PBF
Power Field-Effect Transistor, 50A I(D), 60V, 0.028ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB,
INFINEON
©2020 ICPDF网 联系我们和版权申明