SFH6106-5X001T [VISHAY]
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, ROHS COMPLIANT, SMD, 4 PIN;型号: | SFH6106-5X001T |
厂家: | VISHAY |
描述: | Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, ROHS COMPLIANT, SMD, 4 PIN 输出元件 光电 |
文件: | 总10页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SFH610A, SFH6106
Vishay Semiconductors
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
FEATURES
SFH610A
• Good CTR linearity depending on forward
current
4
3
E
C
A
C
1
2
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Lead (Pb)-free component
SFH6106
4
3
E
1
A
C
2
C
• Component in accordance to RoHS 2002/95/EC and
WEEE 2002/96/EC
i179056
DESCRIPTION
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
The SFH610A (DIP) and SFH6106 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared diode
emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are achieved
with option 6. This version complies with IEC 60950
(DIN VDE 0805) for reinforced insulation up to an operation
voltage of 400 VRMS or DC. Specifications subject to change.
ORDER INFORMATION
PART
REMARKS
CTR 40 % to 80 %, DIP-4
SFH610A-1
SFH610A-2
CTR 63 % to 125 %, DIP-4
SFH610A-3
CTR 100 % to 200 %, DIP-4
SFH610A-4
CTR 160 % to 320 %, DIP-4
SFH610A-5
CTR 250 % to 500 %, DIP-4
SFH6106-1
CTR 40 % to 80 %, SMD-4
SFH6106-2
CTR 63 % to 125 %, SMD-4
SFH6106-3
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, SMD-4
CTR 250 % to 500 %, SMD-4, tape and reel
CTR 40 % to 80 %, DIP-4 400 mil
CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread
CTR 63 % to 125 %, DIP-4 400 mil
CTR 100 % to 200 %, DIP-4 400 mil
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, DIP-4 400 mil
SFH6106-4
SFH6106-5T
SFH610A-1X006
SFH610A-1X018T
SFH610A-2X006
SFH610A-3X006
SFH610A-3X007
SFH610A-4X006
Note
For additional information on the available options refer to option information.
Document Number: 83666
Rev. 2.0, 10-Dec-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com
607
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
DC forward current
Surge forward current
Power dissipation
OUTPUT
VR
IF
6
V
mA
A
60
t ≤ 10 µs
IFSM
Pdiss
2.5
100
mW
Collector emitter voltage
Emitter collector voltage
VCE
VEC
IC
70
7
V
V
50
mA
mA
mW
Collector current
tp ≤ 1.0 ms
IC
100
150
Power dissipation
Pdiss
COUPLER
Isolation test voltage
between emitter and detector
VISO
5300
VRMS
Creepage distance
Clearance distance
≥ 7
≥ 7
mm
mm
Insulation thickness between
emitter and detector
≥ 0.4
mm
Comparative tracking index per DIN
IEC112/VDE 0303 part 1
≥ 175
V
IO = 500 V, Tamb = 25 °C
RIO
RIO
≥ 1012
≥ 1011
Ω
Ω
Isolation resistance
V
IO = 500 V, Tamb = 100 °C
Storage temperature range
Ambient temperature range
Tstg
Tamb
- 55 to + 150
- 55 to + 100
°C
°C
max. 10 s, dip soldering distance
Soldering temperature (2)
Tsld
260
°C
to seating plane ≥ 1.5 mm
Notes
(1)
Tamb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum
ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(2)
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Capacitance
IF = 60 mA
VR = 6 V
VF
IR
1.25
0.01
13
1.65
10
V
µA
V
R = 0 V, f = 1 MHz
CO
Rthja
pF
Thermal resistance
OUTPUT
750
K/W
Collector emitter capacitance
Thermal resistance
VCE = 5 V, f = 1 MHz
CCE
Rthja
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
5.2
500
2
pF
K/W
nA
nA
nA
nA
nA
nA
nA
nA
nA
nA
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-5
SFH6106-5T
50
50
2
2
50
2
50
5
100
100
100
100
100
100
Collector emitter leakage current
VCE = 10 V
5
5
5
5
5
www.vishay.com
608
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83666
Rev. 2.0, 10-Dec-08
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
COUPLER
Collector emitter saturation
voltage
IF = 10 mA, IC = 2.5 mA
f = 1 MHz
VCEsat
CC
0.25
0.4
0.4
V
Coupling capacitance
pF
Note
amb = 25 °C, unless otherwise specified.
T
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO
PARAMETER
TEST CONDITION
PART
SYMBOL
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
MIN.
40
TYP.
MAX.
80
UNIT
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-5
SFH6106-5T
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
40
80
63
125
125
200
200
320
320
500
500
63
100
100
160
160
250
250
13
IF = 10 mA, VCE = 5.0 V
IC/IF
30
30
45
45
70
70
90
90
13
22
22
IF = 1 mA, VCE = 5 V
34
34
56
56
SWITCHING CHARACTERISTICS
PARAMETER
NON-SATURATED
Current
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
V
CC = 5 V, RL = 75 Ω
CC = 5 V, RL = 75 Ω
CC = 5 V, RL = 75 Ω
CC = 5 V, RL = 75 Ω
CC = 5 V, RL = 75 Ω
IF
tr
10
2
mA
µs
Rise time
V
V
V
V
Fall time
tf
2
µs
Turn-on time
Turn-off time
Cut-off frequency
SATURATED
ton
toff
FCO
3
µs
2.3
250
µs
V
CC = 5 V
kHz
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
IF
IF
IF
IF
20
10
10
5
mA
mA
mA
mA
Current
Document Number: 83666
Rev. 2.0, 10-Dec-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com
609
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
SATURATED
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
tr
tr
2
3
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
µs
Rise time
tr
3
tr
4
tf
11
14
14
15
3
tf
Fall time
tf
tf
ton
ton
ton
ton
toff
toff
toff
toff
4.2
4.2
6
Turn-on time
18
23
23
25
Turn-off time
Note
All values presented are typical values.
www.vishay.com
610
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83666
Rev. 2.0, 10-Dec-08
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
(according to IEC 68 part 1)
55/100/21
Comparative tracking index
CTI
175
10000
890
399
VIOTM
V
VIORM
V
PSO
400
275
175
mW
mA
°C
ISI
TSI
Creepage distance
Clearance distance
Creepage distance
Clearance distance
standard DIP-4
standard DIP-4
400 mil DIP-4
400 mil DIP-4
7
7
8
8
mm
mm
mm
mm
Insulation thickness,
reinforced rated
per IEC 60950 2.10.5.1
0.4
mm
Note
As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the
safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS
Tamb = 25 °C, unless otherwise specified
IF
1.0 kΩ
IF
RL = 75 Ω
VCC = 5 V
VCC = 5 V
IC
47 Ω
47 Ω
isfh610a_02
isfh610a_01
Fig. 1 - Linear Operation (without Saturation)
Fig. 3 - Switching Operation (with Saturation)
%
3
10
30
IF = 10 mA, VCC = 5.0 V
mA
I
I
I
I
= 14 mA
C
F
c
5
F
4
I
I
I
= 12 mA
= 10 mA
= 8 mA
F
F
F
20
10
3
2
2
10
1
5
I
I
= 6 mA
= 4 mA
F
F
I
= 1 mA
I
= 2 mA
F
F
1
10
0
- 25
0
25
50
75
0
5
10
V
15
TA (°C)
V
CE
isfh610a_04
isfh610a_03
Fig. 2 - Current Transfer Ratio (CTR) vs. Temperature
Fig. 4 - Output Characteristics (Typ.) Collector Current vs.
Collector Emitter Voltage
Document Number: 83666
Rev. 2.0, 10-Dec-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com
611
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
120
1.2
P
= f (T )
A
V
= f (I )
F
tot
mA
F
V
V
I
F
F
25 °C
50 °C
90
60
30
0
75 °C
1.1
1.0
0.9
-1
0
1
2
10
5
10
5
10
5 mA 10
0
25
50
75 °C 100
I
T
F
A
isfh610a_05
isfh610a_08
Fig. 5 - Diode Forward Voltage vs. Forward Current
Fig. 8 - Permissible Power Dissipation vs. Temperature
20
200
mW
f = 1.0 MHz
pF
15
P
tot
150
100
50
C
Transistor
10
5
Diode
C
CE
0
0
-2
-1
0
1
2
10
10
10
10
V
10
0
25
50
75 °C 100
V
e
T
A
isfh610a_06
isfh610a_09
Fig. 6 - Transistor Capacitance (Typ.) vs. Collector Emitter Voltage
Fig. 9 - Permissible Diode Forward Current vs.
Ambient Temperature
4
mA
5
10
t
p
t
I
p
F
I
D =
F
D = 0
0.005
0.01
0.02
T
T
Pulse cycle
D = parameter
3
10
0.05
0.1
5
0.2
0.5
DC
2
10
5
1
10
-5
-4
-3
-2
-1
0
1
10
10
10
10
10
10 s 10
t
p
isfh610a_07
Fig. 7 - Permissible Pulse Handling Capability Forward Current vs.
Pulse Width
www.vishay.com
612
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83666
Rev. 2.0, 10-Dec-08
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
PACKAGE DIMENSIONS in inches (millimeters)
0.268 (6.81)
0.255 (6.48)
Pin 1 identification
0.190 (4.83)
0.179 (4.55)
0.312 (7.92)
0.296 (7.52)
ISO Method A
°
10
(0.84)
(0.74)
0.033
0.029
0.045 (1.14)
0.030 (0.76)
0.150 (3.81)
0.130 (3.30)
0.250 (6.35)
0.230 (5.84)
4°
typ
0.130 (3.30)
0.110 (2.79)
0.035 (0.89)
0.020 (0.51)
.
3°to 9°
0.052 (1.32)
0.048 (1.22)
0.012 (0.30)
0.008 (0.20)
0.105 (2.67)
0.095 (2.41)
i178027-1
SMD
0.268 (6.81)
0.255 (6.48)
0.190 (4.83)
0.179 (4.55)
PIN 1 IDENTIFICATION
0.030 (0.76)
R
0.010 (0.25)
0.100 (2.54)
0.070 (1.78)
0.060 (1.52)
0.315 (8.00) min.
0.395 (10.03)
0.375 (9.52)
0.435 (11.05)
0.312 (7.92)
0.296 (7.52)
0.045 (1.14)
0.030 (0.76)
0.033 (0.84)
0.029 (0.74)
10 °
0.150 (3.81)
0.130 (3.30)
0.012 (0.30)
ISO methodA
0.008 (0.20)
4° typ.
0.0098 (0.249)
0.004 (0.102)
Lead coplanarity
0.004 (0.102) max. (’K’)
0.052 (1.32)
0.048 (1.22)
0.105 (2.67)
0.095 (2.41)
i178029-2
Document Number: 83666
Rev. 2.0, 10-Dec-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com
613
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
Option 7
Option 8
Option 6
0.300 (7.62)
typ.
0.407 (10.36)
0.391 (9.96)
0.300 (7.62)
typ.
0.307 (7.8)
0.291 (7.4)
0.020 (0.50)
0.000 (0.00)
0.150 (3.81)
0.130 (3.30)
0.028 (0.7)
0.180 (4.6)
0.160 (4.1)
0.315 (8.0)
min.
0.365 (9.27)
min.
0.014 (0.35)
0.010 (0.25)
0.472 (12.00)
max.
0.331 (8.4)
min.
0.400 (10.16)
0.430 (10.92)
0.406 (10.3)
max.
18487
www.vishay.com
614
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83666
Rev. 2.0, 10-Dec-08
SFH610A, SFH6106
Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
Vishay Semiconductors
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with
respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone
depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use
within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in
the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency
(EPA) in the USA.
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do
not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer application by the
customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall
indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any
claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Document Number: 83666
Rev. 2.0, 10-Dec-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com
615
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
SFH610A-1-X001
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
VISHAY
SFH610A-1-X006
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, DIP-4
VISHAY
SFH610A-1X016
SFH610A, SFH6106 - Optocoupler, Phototransistor Output, High Reliabilitz, 5300 VRMS
VISHAY
©2020 ICPDF网 联系我们和版权申明